Peter Daysh Davey Water Heater Query

[Slovenia]

Application Help Requested

Application Help Requested

We have a good working boiler here in the Serbian Boiler and now all we need is a way to apply it to real life. Some of us don't have any experience in hvac and when it comes to actually utilising this boiler in a real life scenario, we need to know how to apply hvac methods. So, I am requesting the help of all you guys who know how to make manifolds for the furnace and/or piping applications for powering a steam engine or Tesla turbine for powering an electrical generator to make free electricity. We need to think out of the box now and help one another.

We experimenters really need your help if you have any suggestions for how we can apply this boiler in real life.

If you know anything about pulsed dc, we could also use your help from the standpoint of which circuits might work best for us, etc.. It has been suggested by several experimenters that this device will make enough hydrogen to power a car or at least reduce fuel costs in a big way.

I'm looking forward to hearing from some of you. Thanks!!

[kenssurplus]

RE: my Peter Davey boiler replication

Hi all,

I rooted around in my vast pile of failed ou attempts and found my boiler still mostly in one peice.

Here is the photo of it:


Image11 | Flickr - Photo Sharing!

Anyway, after looking it over it looks like the edge spacing is at 2mm not the 1mm I originally thought.

[PhysicsProf]

Thanks for the warm welcome, Chet and Slovenia.
I see you don't think too highly of inventors who HIDE their candle under a bushel, Chet... And I agree with you -- we need to get these devices out to the PEOPLE of the world, open source finally, else they are really of no use.

To be fair, this fellow Timothy says he is disclosing the technology in China (with a book he wrote, evidently) and Japan, not in the USA (perhaps legal isssues??) in this video I came across this morning:

WITTS Independent Verification # 298 (Richard Lobwein) [www.witts.ws] - YouTube

This PESWiki article has more info:
Directory:World Improvement Through The Spirit Ministries - PESWiki

All in all, I agree with your conclusion Chet --

Lets play with his Heater Shall we??

Yes, and be grateful to the people here who are willing to share what they have learned about this technology so WE CAN GET IT OUT THERE TO THE PEOPLE!
Thanks, Chet.

[Slovenia]

PhysicsProf

PhysicsProf

Great to have you here with us PhysicsProf!!

[RAMSET]

Welcome to the thread!!

PhysicsProf
You represent everything that is Right with this community!
I salute you for all you do ,and thank you for helping members here!

I can tell you that the Witts heater has been a passion of mine for some time!
Don't give them a Penny!!Not a Cent [please]. They use this tech everyday for a century or more ,and just like Mithernika in Switzerland [slaughtered the spelling] They think their special....
I think Their special Too, I think there is a very special place in Hell for Men like these!!

I once had correspondence with Sir Timothy Thrapp Thru A friend in Finland,
I was Working on A gravity Wheel at the time,And He wanted to Play "If you show me Yours I'll show you Mine""
Chester Don't Play that Game!!
Timmy Is a Creep................

Lets play with his Heater Shall we??[I Like the Helmotz you posted, I believe Gordon showed something Similar?

Thanks
Chet

[PhysicsProf]

I've been following this thread more recently and find the developments most encouraging! This is one arena where I expect great things in the next three months as we march into 2012.

My sincere congratulations to those of you working on the Sonic Boiler and variants, Mr C, Slovenia, Chet, Mr IKEA, Daemonbart and all.

I've already awarded a small token of appreciation to one of you, as described in this thread: http://www.energeticforum.com/renewa...menters-2.html
Eight prizes or grants have gone out so far, from proceeds from my father's inheritance, and I'm glad to do this -- To encourage you and further development of breakthrough energy devices for the betterment of mankind, worldwide. Great work!

As for myself, I've been working lately on a dual resonant-LC/LCR circuit as exemplified by Armagdn03; but I would like to work on this project as well.

Today I noted a tunable Helmholt-type resonator that might be of interest here; see attachment. Basically, one varies the resonant frequency by sliding the lower cylinder in or out -- a lot easier than sanding! if it works for this purpose...

Also, what do you fellas think of Timothy's devices, of WITTS (linked to by Chet recently)?? Don't want to get spread too thin; but I thought this was interesting. I want one for Christmas, too, CHET!

E.g., The Worlds Most Efficient Generator...from WITTS! [www.witts.ws] - YouTube

[Slovenia]

Thanks for the update

Thanks for the update

Yes, don't push it with Mama. I'm in the same boat and have been continuing to do some things and it hasn't been going to well either at home.

Hello all!
I still do not have nothing great to report on my tuning of the can. Time to play with this has been extremely non-existant lately, and Mrs. Cornfused does'nt seem to share the enthusiam as I do on these kind of things. So, as the saying goes...When Mama aint happy aint nobody happy!!!!

[cornfused]

Practical use for heat

Hello all!
I still do not have nothing great to report on my tuning of the can. Time to play with this has been extremely non-existant lately, and Mrs. Cornfused does'nt seem to share the enthusiam as I do on these kind of things. So, as the saying goes...When Mama aint happy aint nobody happy!!!! Im hoping over Christmas break to be able to get my can in the water and get my "feet wet" so to speak, even if my can isnt in perfect tune.
I have also aquired some stainless pipe to construct a device out of...just needs cut and turned down/boared to proper size.....and of course tuned.
As a practical way to use the hot water/steam heat from the boiler...A car radiator and a box fan or table top fan. The radiator already has a safety release mechanism for over pressure(cap).
A boy down the road has an outside wood boiler, he pumps 180 degree water from that to a radiator out of a 70's model chevy truck that is slid into the filter slot of his furnace. he disabled the heating elements of the furnace so when the thermostat turns on the air handler when the house gets cool, it blows through the radiator and heats the whole house through existing duct work. For a water pump, google hydronic heating parts. you can get a nice pump for 100$, will last for years. Hope this helps get some wheels turning in people's heads, when I have more to report I will.
Cheers!!, Jason

[wrtner]

Nice one Paul R
Thank you so much for taking the time to do that!!

Thanks. but...
Run 2 is up the creek. The water is set at 200 litres instead of 2 L.
This brings the COP to the same as its neighbouring runs.

So that it can be used for processing future work, I would have uploaded
it here but we cannot upload spreadsheet files .

Why is this?

[Ares123]

He meant "prsten" ring, but google translate wrong because it was misspelled "prste" - fingers.

[RAMSET]

Slovenia Wow Post 1166 test data!!

Nice one Paul R
Thank you so much for taking the time to do that!!

@Fellows does any part of this look Familiar??

THEWATERENERGY1's Channel - YouTube

These are the Boyz that are heating one liter 60- 90 C in one second ?

HEATRESONATOR..HEATSTEAM RESONATOR TEST FOR HOME HEATING BOILER ..STAN MEYER STYL ... - YouTube

HHMmm
Chet likes this alot!!

[Slovenia]

Wrtner Spreadsheet

Wrtner Spreadsheet

Thanks Wrtner, for putting this together for us!!!

[Slovenia]

Fingers around the bottle??

I'll try to get an answer for that question.

What does Mr. C mean by Ikea fingers around the bottle?

[RAMSET]

Good question

Slovenia
If you could ask that question {fingers]
even If you have him post the Serbian Word and we could translate it??

Thanks
Chet

[eternalightwithin]

What does Mr. C mean by Ikea fingers around the bottle?