Peter Daysh Davey Water Heater Query

[kenssurplus]

My Peter davey sonic boiler attempts

Hi All, I have been following this topic for about a month trying to catch up with all the posts and developments.

Back in 2008 or 2009 I built a sonic boiler from Patrick Kelly's fine Ebook using stainless steel measuring cups. I believe it was a 1/4 cup and a 1/3 cup with a hole drilled in the center of each. On hand in my materials area was a section of a childs plastic play structure. This plastic "rod" had two slots running the entire length of it and was about the only thing around that I could think of to keep two 240 volt wires apart for this heater attempt. This "rod" was smoth on all sides except for the two slots so I threaded threads on it so that I coud attach nuts and electrical mounting eyelts etc.... I also separated the two cups with nylon washers until I had about a 1 mm spacing at the EDGES.

Before assembly, I mounted each cup to the rod seperately and tried to get a mechanical resonant frequency by tapping them to see if they were close to something good. I used a software program (spectrum lab) and my computer's sound card and microphone to identify the main resonance.

Here is my post from another forum:
"Re: Finding the resonant freq part deux.

I have used that method to find mechanical resonances with the following
software:

[url=www.qsl.net/dl4yhf/spectra1.html[/url]

It also has signal generator functions built into the software so you can output
one or a mix of frequencys etc.... and then see the result on the spectum
analyzer display."

I don't think I was aiming for any low freq of 60 hz but a higher harmonic.
Anyway, the results were mixed:

The sonic boiler placed in a 5 gallon bucket of water heated it up very quickly to a boil. No data survives of this experiment, however, and I have looked for the device now for a few days to upload a pic but I cannot find it now.

The water in the bucket turned a very brown yucky color, as did the stainless steel cups, but they were still physically ok.

The copper covered aluminum 14 AWG wires (magnet wire insulated) deteriorated and broke showing corosion powder at several spots.

The plastic threaded rod melted causing the distance from each cup to change and the mounting to become loose.

Becasue of these setbacks and no other suitable replacement parts or money, the project was abandoned.

[RAMSET]

Things are moving forward

S
Yes you will [have an interpreter]

Good stuff S !!

I feel we have help from Above on this one!!!

Chet

[Slovenia]

Tiger

Hi Chet,

I've got a contact who says he may be able to get me in touch with Tiger directly. If that works out, I'll need your Russian to help me translate. Thanks!! Tiger knows how to get 10 KW and I think he'll share that with us if I can get into contact with him.

Best Regards,
Slovenia

I believe we will be breaking Timmy's Heart pretty soon

Yeah
I BELIEVE !!

S we have a young man from Russia came to visit last Night
Perhaps we can figure something out [translations][Skypes?]

Gotta Go
Chet

[RAMSET]

Sir Timothy Thrapp [AKA "Timmy"]

I believe we will be breaking Timmy's Heart pretty soon

Yeah
I BELIEVE !!

S we have a young man from Russia came to visit last Night
Perhaps we can figure something out [translations][Skypes?]

Gotta Go
Chet

[Slovenia]

Timmy Device??

Well, from the outside of Timmy's device there is at least some similarity. I don't see an upper electrode at the top of the sphere, but he probably has the lower electrode inside the sphere. It would appear that Peter Davey's invention is being utilized at least to some extent. Mr. "C"s diagram is of the Peter Davey device.

S
Just picked up My Skype Phones ,I'll be trying it out shortly.
In looking at the professors rendering of the Davey device above it looks an awful lot like Timmy's Device?
Here

[www.witts.ws] World's Most Efficient Overunity Water Heater ... from WITTS [www.witts.ws] - YouTube


Chet

[RAMSET]

Looks like Witts

S
Just picked up My Skype Phones ,I'll be trying it out shortly.
In looking at the professors rendering of the Davey device above it looks an awful lot like Timmy's Device?
Here

[www.witts.ws] World's Most Efficient Overunity Water Heater ... from WITTS [www.witts.ws] - YouTube


Chet

[RAMSET]

Thanks Old man

Heh Heh ..

Now I'll pick up a head set tomorrow!

Thanks
Chet

PS
TEKTRON
Sorry for your troubles Bud
I'll keep you in my thoughts and prayers!![Ruff times indeed]

[Slovenia]

Skype Download

Hi Chet,

Yes, it's very easy indeed. I think you are younger than I am. Just go to skype.com and download the Skype software from the Skype website. Once you've downloaded the program, load it and you are ready to go. You will have to become a member of Skype to use it, but it's all free unless you call a land phone or a cell phone. Just get a headset and call another person who has skype and a headset and you can talk free over the computer. If you can't catch you're friend on line when you are, just type them a message and they'll get that just like e-mail and respond back to you when they're available. You will have to load your contacts into the program. That's pretty easy too. When you are done with using Skype at the facility, just remove it from the computer and there will be no worries. When the Skype program is not in use, just turn it off because it does draw some ram.

Let me know if you need more info.. It's a great program. You can send large files quickly with Skype and do other things also.

P.S.: Supposedly it even has an Israeli program embedded into it that can tell you if the person you are talking to is lying or not. I heard this from a corporate spy.

Best Regards,
Slovenia

Slovenia
Can you teach me how to Skype?? [I feel so old]
You know I am using the facility's Computer so I can't really Download [crazy stuff].
Thanks
Chet

[RAMSET]

Perhaps a good Skype time?

Slovenia
Can you teach me how to Skype?? [I feel so old]
You know I am using the facility's Computer so I can't really Download [crazy stuff].
Thanks
Chet

[RAMSET]

Sorry for the misunderstanding S

One post removed .............
Slovenia
I will hold off on that test Till you speak with Professor Savic

Thanks
Chet

[Slovenia]

Sharing

Sharing

It would be nice if some of the rest of you would share your experiences/experiments with us regarding this tech. I know if you are just waiting on the few of us who are posting it's going to be awhile until we have anything significant to share. If more of us were experimenting and posting our results, it would sure help a lot. Anyway, this has been said before.

[Slovenia]

Thanks!!

Hi Tektron,

Yes, I know. She's the book keeper and there just isn't any money in the kitty any more since I retired. If I could drive on water and get off grid, things would be much better!!

Best Regards,
Slovenia

Pay heed my friend, This is a warning sign. My wife left me 3 months ago after 30 years.

[Slovenia]

Facinating Response

Facinating response Boguslaw, I understand.

Oh my God !

[Slovenia]

Diagram of Peter Davey Boiler

Mr. "C" provided us with a diagram of the Peter Davey boiler. Most of the information out there on Peter Davey doesn't show the internal workings of his device, so this is a very important diagram indeed. Anyway, I posted this before but decided to post it again for anyone who might have missed it the first go round.

Diagram of Peter Davey Boiler

[Slovenia]

HHO (12 volts)

Hi Enrgtx,
The hho is one of the main reasons I've been looking at this boiler. Also, I too was thinking of using steam for driving a device to make electricity. If you would, please tell us more about specifics such as but not limited to your gap with regard to your hho production at 12 volts and any other details related to getting high output of hho such as pulsed dc or whatever.

We need to utilize this device to perform useful work and the boiler setup for heating a home or business is probably far above the expertise of many here.

Best Regards,
Slovenia

hi
After everybody yelled at me to stop blowing up the fuses on mains I was forced to move on too 12v and start generating hydrogen there was no boiling any more. but was hydrogen hihi. I can make some pictures in late December when I will be at home so far i watch your progress in that field.
...... Jesus is Lord....