Announcement

Collapse
No announcement yet.

Peter Daysh Davey Water Heater Query

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • boguslaw
    replied
    Originally posted by RAMSET View Post
    boguslaw
    How long are the polish cans??
    They wanted me to order a Pallet of beer today?[and I don't drink [anymore]]

    I'm going down to the local market and grabbing a Big can [cheap] and tune it!
    This project is gonna drive me to drink!!

    Thanks
    Chet
    @ Dragans
    Thank you
    Hi Chet

    Normally Polish beer cans are 500ml and about 160mm long (150mm to the point of shape change going to bevel) but I found a promotional longer can 568ml and measure about 189mm total length.Still this is not required 200mm for USA 60Hz :-( You probably need 650 ml can.

    I would like to send you a few cans but shipping costs would be overkill and the length is still not optimal for your grid frequency.


    Please try this site WWW.ZYWIECUSA.COM , though they have only 500ml can which may be too short. Personally I didn't saw 650ml can , only bottles.
    Last edited by boguslaw; 10-29-2011, 01:46 PM.

    Leave a comment:


  • daemonbart
    replied
    I agree on this! I have several setups after my more exact replication, reason for this is that my beer cans loose material, maybe this wont happen if res is perfect

    Pulsing dc at 300V at different freq give me huge amount of HHO, dont want that in my piping

    One thing I am testing is running my circulation pump with pulses to come close to boiling for higher cop!

    Time will tell??

    Kind rgds D

    Originally posted by Slovenia View Post
    We have a lot of smart minds on this thread. This is a very easy device to make. It's not at all complicated. Many of you are so intelligent that you can't believe in this device because of it's simplicity. Even my untuned American pop can with a European sized ring boiled water very fast. I wanted to jump the gun and see what this device would do. Even though simple, we have all the necessary information to replicate this device and have something very good to use. So, my recommendation is to build the device to the inventor's specs first before you try something else. I would suggest using either stainless steel or titanium for the ring however. The tin can metal ring I made was for proof of concept only and it got rusty while being used during the first trial.

    Anyway, I have watched your posts, and we have many very smart guys here looking at this. The inventor is also a very very very smart guy like maybe some of you. Let's build his device and see what you come up with. If you like, you can deviate later and make a harder to make device.

    Cheers

    Leave a comment:


  • Slovenia
    replied
    Thanks!!

    Jason,

    Thanks for sharing your video and tones link with us. Great job!! We appreciate the way you have joined in and shared with us.

    Best Regards,
    Slovenia


    Originally posted by cornfused View Post
    MrCornfused's Channel - YouTube

    A video of the can i've been working on. Its not real clear, but it does give ya all an idea of what im doing. It bounces the nail pretty good at 75 hz, so i think i got some more shortining of the can to do.
    Cheers, Jason


    Stereo System Test & Analysis Tones by Nino B. the website where I downloaded the frequency mp3's

    Leave a comment:


  • cornfused
    replied
    video

    MrCornfused's Channel - YouTube

    A video of the can i've been working on. Its not real clear, but it does give ya all an idea of what im doing. It bounces the nail pretty good at 75 hz, so i think i got some more shortining of the can to do.
    Cheers, Jason


    Stereo System Test & Analysis Tones by Nino B. the website where I downloaded the frequency mp3's
    Last edited by cornfused; 10-29-2011, 04:19 AM. Reason: link for frequency

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by Duncan View Post
    Peters cone unless he puts a hole in the top where he wishes it to.True, Reactive, and Apparent power : POWER FACTOR
    https://ece.uwaterloo.ca/~lab100/ls1notes.pdf

    in other words, you are talking about

    Helmholtz resonance is the phenomenon of air resonance in a cavity, such as when one blows across the top of an empty bottle. The name comes from a device created in the 1850s by Hermann von Helmholtz, the "Helmholtz resonator", which he, the author of the classic study of acoustic science, used to identify the various frequencies or musical pitches present in music and other complex sounds



    you should check out this thread http://www.energeticforum.com/renewa...tml#post155886, you may find some interesting info and Thank you for your insight, i learn quite a bit from you


    you will have to forgive me though, i am a visual person....math and formulas although i can make the effort to grasp them...I rather go the geometric way...ie experimental way
    Last edited by MonsieurM; 10-28-2011, 11:37 PM.

    Leave a comment:


  • Slovenia
    replied
    Duncan

    Thanks Duncan for sharing on our thread. We're glad to have you here!!

    Leave a comment:


  • Duncan
    replied
    Originally posted by MonsieurM View Post
    reposting what Peter Davey wrote on his patent:

    Slovenia just posted an important information on Peter Davey 's Patent, i took the liberty of capturing the info concerning the sonic boiler:







    and compare it with a slice view of the Moe Joe Cell












    True, Reactive, and Apparent power : POWER FACTOR
    https://ece.uwaterloo.ca/~lab100/ls1notes.pdf

    Leave a comment:


  • Slovenia
    replied
    Polish Beer Can

    Hi Chet,

    I always like to hear about your beer can hunt. I don't think that 500ml can is tall enough for our needs here in US. I don't think it can be tuned to 60 hz. I think you're going to need a taller can such as one of the American energy drink cans or fruit drink cans. Some of the fruit drink cans are 24 oz and they are tall enough to give us the 200 mm can Mr. "C" suggested for us. The American cans are different diameter also as Jason discovered, which may effect the mix too. Anyway, I hate seeing you burn up all that gas and energy chasing that illusive Polish beer can. I want you to have a can really bad. I can't wait to see your exhibit, sonic boiling device. I know it will be a very well made innovative cool device.

    Best Regards,
    Slovenia

    Originally posted by RAMSET View Post
    boguslaw
    How long are the polish cans??
    They wanted me to order a Pallet of beer today?[and I don't drink [anymore]]

    I'm going down to the local market and grabbing a Big can [cheap] and tune it!
    This project is gonna drive me to drink!!

    Thanks
    Chet
    @ Dragans
    Thank you

    Leave a comment:


  • RAMSET
    replied
    Gonna grab a Big can and Tune

    boguslaw
    How long are the polish cans??
    They wanted me to order a Pallet of beer today?[and I don't drink [anymore]]

    I'm going down to the local market and grabbing a Big can [cheap] and tune it!
    This project is gonna drive me to drink!!

    Thanks
    Chet
    @ Dragans
    Thank you

    Leave a comment:


  • Slovenia
    replied
    Smart Minds Here

    We have a lot of smart minds on this thread. This is a very easy device to make. It's not at all complicated. Many of you are so intelligent that you can't believe in this device because of it's simplicity. Even my untuned American pop can with a European sized ring boiled water very fast. I wanted to jump the gun and see what this device would do. Even though simple, we have all the necessary information to replicate this device and have something very good to use. So, my recommendation is to build the device to the inventor's specs first before you try something else. I would suggest using either stainless steel or titanium for the ring however. The tin can metal ring I made was for proof of concept only and it got rusty while being used during the first trial.

    Anyway, I have watched your posts, and we have many very smart guys here looking at this. The inventor is also a very very very smart guy like maybe some of you. Let's build his device and see what you come up with. If you like, you can deviate later and make a harder to make device.

    Cheers

    Leave a comment:


  • RAMSET
    replied
    Who loves Yah ..............

    Duncan
    All that for Free......................??
    I will be giggling for hours over that!!
    I love yah Man ............ You are an absolute Pissser!!

    I almost choked the life out of some Dumb broad at a European Beer Wholesaler today,[its a good thing she was on the phone=:}

    But coming back home after a 2hr drive "CanLess" ,and then reading your post
    Made it all OK!![could of had all the Bottles I wanted??]
    I will have to read that over several more times of course!!

    I'm gonna Hang a nail next to the Garbage pail Heterodyne a few Oldies, fill it with water and jump in !!

    Good stuff..........

    Thanks
    Chet

    Leave a comment:


  • boguslaw
    replied
    Originally posted by dragans View Post
    As I said 500mL beer can same as any other can.
    There is also beer can 568ml though rare . It's height may be even 189mm. I bought one today.

    Leave a comment:


  • dragans
    replied
    As I said 500mL beer can same as any other can.
    Attached Files

    Leave a comment:


  • Duncan
    replied
    Part 1 of 6: Eric Dollard Tesla Longitudinal wave Energy SBARC Ham Radio with Chris Carson - YouTubehttps://lh6.googleusercontent.com/-t...2520floyyd.png

    New Free Energy by George Mitchell - YouTube

    F.M.CHALKALIS ENERGY MULTIPLIER - YouTube

    ThaneCHeins's Channel - YouTube

    ThaneCHeins's Channel - YouTube

    and answer these questions --- Both John Bedini and Tom Bearden have indicated that energy from the Vacuum enters the load and forces its way back to the source. There fore if I see powerful vertical bolts entering a load and changing with that load I should

    a/ get my glasses changed
    b/Throw my monitor away
    c/ pay very special attention to the equipment

    If I wanted to tune some thing to Aetheric or reactive energy and there was a bloody great Blue bolt of light indicating that something unusual was happening I should

    a/ balance an old nail on some random tin cans and blow a trumpet
    b/ close my eye's and whistle roll a silver dollar
    c/ find some way to tune to bolt....from the blue

    Leave a comment:


  • Duncan
    replied
    George Carlin -"Who Really Controls America" - YouTube
    And here's the voice of the America's 35th president telling you just how dirty it is and how it needs cleaned up JFK1 - YouTubeOpie & Anthony: Stan Meyer's Water Car - YouTube land of the free ?
    Now random oscillations... yesterday presumably whilst you were writing these posts I was assembling these bits
    https://lh6.googleusercontent.com/-e...0/DSCF0154.JPG
    In order to build this
    https://lh6.googleusercontent.com/-X...0/DSCF0156.JPG

    https://lh3.googleusercontent.com/-O...0/DSCF0155.JPG
    As Peter Davey desperately fought to defend this little Island. It would seem that In various parts of the world there has been a protest aimed against giant corporations, I can perhaps understand that, after all corporations do this sort of thing http://www.youtube.com/watch?v=NbakN7SLdbkvand of course John Perkins, Part 1 at the VFP National ConventionBBC - History - Historic Figures: William Heath Robinson (1872 - 1944)Joseph Fourier - Wikipedia, the free encyclopedia
    Originally posted by MonsieurM View Post
    I found this piece of info that could help you advance:



    Problem set

    check it out...

    Simple harmonic motion - Wikipedia, the free encyclopedia







    Leave a comment:

Working...
X