Peter Daysh Davey Water Heater Query

[Slovenia]

Frequency of Mains Voltage

It's my understanding that the frequency of the mains voltage is the same for 110 volts in USA as it is for 220 volts. Am I right about this??

If so, this makes things very easy for this project. The 220 volt USA boiler is much more efficient than the 110 volt boiler. Also, there is supposedly a way to achieve this added voltage very simply with no real expense; no expensive transformers; no expensive wiring; with the use of a very simple circuit designed by Peter Lindeman. The circuit is copyrighted so I am not at liberty to post it here but it is posted on this website, Energetic Forum, in at least one place. The circuit is reported to work very well and be very easy to build by anyone.

Anyway, this information did not come from my contact, so it probably is a good idea to discuss is here.

[Slovenia]

Inverter

He needed an odd ball inverter for his most current project he's working on as well as titanium shim material. I purchased the shim material for him, but he hasn't gotten back to me about it. I guess he'll need to order the inverter from US.

He's quite the computer guy too, a Jack of all talents. He helped me quite a lot.

To me Davey is two half hemispheres!!
----------------------------
I NEED A CAN!!!

Can't you beg The professor to give us specs on a domestic can ??
What equipment was he looking for ??
Lets Make a deal !!

How about I give you a list of popular sizes and we see if he has a preference or reccomendation??
well ,we decide whats popular together ,and then ask if he'll do the math?

Chet

[RAMSET]

Moe joe cell

So Gordon,
I really like the looks of that "Moe Joe cell"
It looks like the Witts heater ? Somebody here shared how Tesla said
"All things are possible In the circular form".[not exactly? ]

How does it work??
Thanks
Chet

[AhuraMazda]

This is the right stuff for the ring material if you want to go stainless. It will have to be cut down to 5mm width to your length. I haven't gotten hold of any stainless shim stock to try yet. I've been pretty busy doing other things. I got the computer back up and running tip top without any info loss thank God.

Amazon.com: "Stainless Steel Shim Stock Full Hard Cold Rolled .008"" Thick 6"" x 18""": Industrial & Scientific

try this

SET OF TWO STAINLESS STEEL EGG RINGS PERFECT FRIED EGGS | eBay

and

Thermal Stainless Steel Travel Coffee Mug Cup Flask NEW | eBay

Instead of a can.

[RAMSET]

I agree

To me Davey is two half hemispheres!!
----------------------------
I NEED A CAN!!!

Can't you beg The professor to give us specs on a domestic can ??
What equipment was he looking for ??
Lets Make a deal !!

How about I give you a list of popular sizes and we see if he has a preference or reccomendation??
well ,we decide whats popular together ,and then ask if he'll do the math?

Chet

[Slovenia]

Hemisphere??

What does a hemisphere or half a hemisphere mean to you? I'm working on something I can't comment on yet.

I think of the Peter Davies unit as two half hemispheres stacked on one another. Is that what you think?

[Slovenia]

Palm Sander

I've got a palm sander, so I am going to sand my 302 stainless sheet down to a width as near as possible to .2mm in thickness. We'll see how that goes. I can probably get that done and implemented by the end of this week. 302 is not my favorite stainless but it's what I have available, so we'll have to try it out.

[Slovenia]

Ring Material

This is the right stuff for the ring material if you want to go stainless. It will have to be cut down to 5mm width to your length. I haven't gotten hold of any stainless shim stock to try yet. I've been pretty busy doing other things. I got the computer back up and running tip top without any info loss thank God.

Amazon.com: "Stainless Steel Shim Stock Full Hard Cold Rolled .008"" Thick 6"" x 18""": Industrial & Scientific

[Slovenia]

Impressed With Inventor

[MonsieurM]

@ Gordon, I love your contributions here!!
Did you see this from member "Dumped" at O.U.R. forum?

Borax or Baking Soda Rectifier and the glow.


@AhuraMazda
Did you see Professor Savic's explanation??
Quote:

Sonic boiler catches the energy of the impact between neutrinos (Teslione),

Thanks RAMSET , but your experience is the more valuable

I posted this a while back

as above so below

or the electromagnetic spectrum is also a Fractal/Constructal system and radiations are part of it

I would suggest you read the rest in this post: especially the first part (ie spiderweb )

http://www.energeticforum.com/147522-post35.html

so there maybe some truth to what you said:

What is radiation, is it just an electron with a high energy- high frequency spin

been thinking about this for a while, maybe it would not be such a bad idea to copy the spiderweb when you want to create your fractal resonance/fractal frequency

How spider builds its web ?

biomimicry at work

ps: on one of its three anchors, what 3d figure does it form inside a cone



hint:

[RAMSET]

Pendulum Waves - YouTube

[RAMSET]

Sound waves

@ Gordon, I love your contributions here!!
Did you see this from member "Dumped" at O.U.R. forum?

Borax or Baking Soda Rectifier and the glow.

[Slovenia]

Built A Lot of Stuff

Yes, I've built a lot of stuff in ten years and learned a lot too. Mostly my research was in the area of hydrogen. We even had Joe Cells working very well. We didn't run any cars on them but they were working. They exhibited some very strange phenomenons. As for the current device, I do believe it is a real deal. I've dealt with a lot of pranksters in the past and learned a lot from them. Pranksters usually talk a great talk but give some very poor information that doesn't lead to anything. The current device will boil water very quickly and it's easy to make. Well, relatively speaking if you're handy with the tools and some what mechanical. Anyway, my current contact is genuinely profound and I believe in him wholeheartedly.

You are an interesting chap. It's good to have you with us in this pursuit.

Somewhere you were saying you have been in persuit of an OU device for over 10 years.

I assume here you are copying something that you have not seen. So you take it on faith that what you have been told is true.

If someone instructs you that the diameter of the ring to 3 decimal points then you can bet there is a lot more precission involved in this.

There is nothing technical in what you have described so far but I don't think you are dumbed down.

In a previous post I asked if you know the principal of the operation of this device. If you don't know, you can not build it! Just like if I asked you to how does a dynamo work. I can give you all the material and if you don't know how it should work then you would never be able to build one.

You would save yourself a lot of grief if you asked your friend the exact operation of this device. There are a lot of pranks on the Internet. I hope this year will be the end of your search.

If you can not explain to someone else how something works then you don't know. And if you don't know you can't build it.

Please take my post as constructive advice.

[MonsieurM]

from: http://www.energeticforum.com/renewa...netism-32.html

I would highly advise you read this, full of insight and how physics was perceived at the time, right before Einstein's Theory took over the physics world

"I consider this extremely important,. said Mr. Tesla. "Light cannot be anything else but a longitudinal disturbance in the ether, involving alternate compressions and rarefactions. In other words, light can be nothing else than a sound wave in the ether..

[AhuraMazda]

address not working... http://www.nalanda.nitc.ac.in/indust...erInt/an24.pdf

Link Fixed!