Announcement

Collapse
No announcement yet.

Imhotep's Radiant Oscillator Video

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hh1341
    replied
    @hh1341, maybe your circuit reach oscillation to unhearable frequency.
    You may be right.

    At my age I'd be lucky to hear over 18 kHz .

    Carl

    Leave a comment:


  • sucahyo
    replied
    @mlurye, very interesting. That look easier to do than other version. Some of inventor of early nineteenth, including Tesla use giant orb at very high altitude. If I recall correctly around 20 feet in diameter. Some inventor mention that there is potential difference of the earth and a couple of feet above it.

    @Inquorate, be carefull.

    @Aromaz, I still amaze with how the back EMF can fool the amp meter. My first experience is when it show zero current for my electrolysis cell when in fact it still produce bubble. The second one is just now when I probe disconnected negative with only one wire from the amp meter. The digital amp meter show current of more than 1 Amp even when the input is about 11mA.

    Isn't radiant energy is static energy? Or do you meant to say that it is RF energy? But since it looks very similar to device in one of Tesla patent where he call it as radiant energy. Even if the antenna is different I think it is safe to call it as radiant energy.

    What will you do with that big capacitor?


    @hh1341, maybe your circuit reach oscillation to unhearable frequency.
    Attached Files

    Leave a comment:


  • Aromaz
    replied
    What Are We Working With?

    First of all: I am still posting this here, but I think it would be better to split off since this will now go off topic seriously. I also do intend to move all my related work to new topic. Lets us keep this for the Radiant Oscillator.

    Leave a comment:


  • Aromaz
    replied
    Replies

    @All: Still having failures to upload videos again. Keep on trying.

    @Inquorate; My wallet is small. I hope to get a special allowance from end Jan so this can go a bit faster. Only big advantage I do have is time, yes. Basically I am on this project more than 12 hours each 7 days of the week. Videos I do show are only portion of the activity and not including all experiments.

    @Jetijs: Will post photo when I get my still back. HV spiked it last week.

    @Ren:@mlurye:

    Leave a comment:


  • hh1341
    replied
    Originally posted by Xenomorph View Post
    @mlurye : What aromaz means is energy that is available everywhere in the universe (As described also by Tesla) provided by nature and not as a result of human activity (radio waves, microwaves mobile phones etc). These antenna chargers just convert microwaves to voltage.

    Until now i was convinced that the frequency of the sound that the CFLs emit is directly proportional to their brightness. However i have run into this
    exception now, where touching the CFL decreases its frequency by 300 Hz, BUT lets it shine brighter (Hard to see in the video). I really dont understand
    this, it makes me wonder how the sound gets actually created.

    YouTube - brightfreq1

    The circuits are amazingly sensitive to just little changes as pointed out by aromaz in his great comparison of different transistors.
    Since i have placed a crystal in the lower half of the ignition coil, the circuit won't react as it used to before doing that.
    That seems to be a sweet spot for placing objects like the solenoid coil that was dicussed here too.
    I have noticed that when the sound disappears I get the best results.
    It might be the circuit is tuned to silent resonance, maybe we are hearing beat frequency oscillation when it is out of tune.(one note beating on another)

    Carl
    Last edited by hh1341; 12-30-2008, 09:09 PM.

    Leave a comment:


  • ren
    replied
    Originally posted by Aromaz View Post
    Radiant energy is somewhat different.

    Energy from the earth is magnetic related - rather electromagnetic. I am near to say with proof that RADIANT energy is NOT magnetic at all. Further my suspicion is that Radiant energy is of very high frequency - probably more than 7 kHz, most likely around 3 to 5 GHz. In matter of experiments I found that I do not need earth wire to ground at all. I just need an 'earth' wire around like antenna - but lower level than circuit if not right under my table.

    PLEASE DO NOT CONSIDER THIS AS AN ATTACK ON ANYONE!!! It is rolling ideas around and comparing notes!
    A small friendly challenge for you Aromaz I think Magnetism is all there is, everywhere. The dielectric is its home and electricity is its by product, the effect which we see under given circumstances when current is allowed to flow via short circuit. This is not how we see it conventionally, people see electricity as running through the circuits inductor and creating the magnetic field. I see the magnetic field that is everywhere given a path through a battery or circuit and it manifests itself as electricity. Pure radiant is pure magnetism, potential without current. I think you are correct on its speeds, maybe not exactly, but close enough to give the general idea.Tesla, Bedini and others have shown us all the transients that appear in the system when inductors are switched on and off sharply. That spike is there, and it preceeds current flow. John has always said that the current kills the radiant.

    My definition of magnetism may differ somewhat from others, Its important I think to ponder this for ones self, and Im not talking about magnets. Thats probably the first thing that pops up in peoples heads. Discussions welcome

    Leave a comment:


  • Xenomorph
    replied
    CFL sound frequency/brightness

    @mlurye : What aromaz means is energy that is available everywhere in the universe (As described also by Tesla) provided by nature and not as a result of human activity (radio waves, microwaves mobile phones etc). These antenna chargers just convert microwaves to voltage.

    Until now i was convinced that the frequency of the sound that the CFLs emit is directly proportional to their brightness. However i have run into this
    exception now, where touching the CFL decreases its frequency by 300 Hz, BUT lets it shine brighter (Hard to see in the video). I really dont understand
    this, it makes me wonder how the sound gets actually created.

    YouTube - brightfreq1

    The circuits are amazingly sensitive to just little changes as pointed out by aromaz in his great comparison of different transistors.
    Since i have placed a crystal in the lower half of the ignition coil, the circuit won't react as it used to before doing that.
    That seems to be a sweet spot for placing objects like the solenoid coil that was dicussed here too.

    Leave a comment:


  • mlurye
    replied
    Aromaz. I agree we are here to discuss ideas not to fight.
    But then let’s define RADIANT as we understand it. As I understand any emitted energy is RADIANT energy would it be pure magnetic waves, electromagnetic, light, heat or radio waves.
    H. Moray was using regular antenna and radioactive salt to receive RADIANT energy. Testatika collecting static charges and converts it to electromagnetic waves (It means that static and electromagnetic waves are related). And there are many other ways to convert other kinds of energy into electromagnetic without using mechanical devices.
    May be I'm wrong but it is the way I understand it. I would appreciate if anyone will give their understanding of RADIANT energy.
    Aromaz and all, my respect for all your efforts and sharing your thoughts

    Leave a comment:


  • Jetijs
    replied
    Originally posted by Aromaz View Post
    .........On the weekend I made a monster capacitor, six copper sheets, 0.5mm thick 24x24 cm square, nice rounded edges. All separated by 3mm lead glass 30x30 cm - high quality and all 'laminated' together with transformer oil, then placed in bowl filled with transformer oil. The stack was 30x30cm and 25mm thick.

    Test charged with standard automotive setup: 12v battery, coil, capacitor (Condensor), point gap in V6 distributor, rotated by electrical drill. It charged up to 1,000V - which was max my meter could read. No corona, no leaks, no discharge - and one BIG BANG of a discharge when shorted remotely. How much MFD? I do not know, my m/meter unable to read.

    Connected to circuit - blue corona everywhere through glass - no charging - but definate shock when touching on wire edge :~(
    Do you have any pictures? Sounds great

    Leave a comment:


  • Inquorate
    replied
    Aromaz, darling...

    I wish I had your wallet, and your time :-) and I'd have to agree with you, if for no other reason than 'it' feels right'...

    I can't sleep, for want of my brain watching the device I dreamt up for dmonarch on Bifiliar winder thread.

    We'll see what a few more glasses of wine can do.

    Leave a comment:


  • Aromaz
    replied
    .........On the weekend I made a monster capacitor, six copper sheets, 0.5mm thick 24x24 cm square, nice rounded edges. All separated by 3mm lead glass 30x30 cm - high quality and all 'laminated' together with transformer oil, then placed in bowl filled with transformer oil. The stack was 30x30cm and 25mm thick.

    Test charged with standard automotive setup: 12v battery, coil, capacitor (Condensor), point gap in V6 distributor, rotated by electrical drill. It charged up to 1,000V - which was max my meter could read. No corona, no leaks, no discharge - and one BIG BANG of a discharge when shorted remotely. How much MFD? I do not know, my m/meter unable to read.

    Connected to circuit - blue corona everywhere through glass - no charging - but definate shock when touching on wire edge :~(

    Leave a comment:


  • Aromaz
    replied
    Air antenna and earth rods - with capacitors.

    I stand to be corrected and it is very possible that I am wrong - completely off my track, crazy and ready for certification. Please do not kill me - yet

    I dare say they are not related to RADIANT energy.

    I tried two similar systems/circuits. One very closely related to Tesla. Currently still have the later on line at the farm. I have long antenna - 100 meter East/West and 100 meter North/South, both 6 meter above ground, four earth rods 4 meters deep and one antenna on each pole - additional 2 meter vertical. All come together at control point with separate wires.

    YES, I do get with multi-meter only -
    - From N-S antenna 220 mV
    - From E-W antenna 192 mV
    - From vertical antenna around 120 mV each
    - From Earth rods 370 to 485 mVolt.

    I can charge my mobile phone on either connection. Combined and running through diode and caps they charge 400V 47,000 MFD capacitor up to 184 volt; takes around 3 hours, can light a 6Vx 1.5 Watt incandescent torch light for about 17 minutes.

    BUT: Does not capture RADIANT energy. That is static, earth fields and energy from radio/microwave/satellite. In my case I can often get a frequency - dead on 50hz which is what we use in 220Vac Thailand. Yes, pulsing High voltage will charge capacitors - but that is provided you have a current flow. If it was pure Earth electromagnetic it would have frequency somewhere between 8 and 14 hz.

    Radiant energy is somewhat different.

    Energy from the earth is magnetic related - rather electromagnetic. I am near to say with proof that RADIANT energy is NOT magnetic at all. Further my suspicion is that Radiant energy is of very high frequency - probably more than 7 kHz, most likely around 3 to 5 GHz. In matter of experiments I found that I do not need earth wire to ground at all. I just need an 'earth' wire around like antenna - but lower level than circuit if not right under my table.

    PLEASE DO NOT CONSIDER THIS AS AN ATTACK ON ANYONE!!! It is rolling ideas around and comparing notes!

    Leave a comment:


  • Aromaz
    replied
    YouTube failure - again.

    @Vortex / Ren - Tanks for the reference to video with compasses. I saw a similar test long time ago; but forgot about it. In fact that was a bad mistake. Today I made some very interesting findings with that simple test.

    Have video 027 and 028 ready to upload. 4x failures due to 'unknown reason' Think it is congested, maybe they need some laxative.
    Will do in the new morning.

    Back to using the basic system - to learn more.

    In video #027 I show how there are sparks (High voltage) all over system, regardless of diodes. Then starting with compasses to show current in lines.
    In video #028 I complete the compass demo and go on to using two coils near/next to each other and using neon bulb to point high voltage in rest of system

    In both these videos keep few things in mind:
    I am not targeting wireless nor spark size.
    The purpose is just to see:
    A: How widespread is the high voltage,
    B: Effects of diodes to prevent HV to circuit
    C: Magnetic field around system
    D: Secondary coil can enhance energy from main coil and environment.

    Neither coils are tuned nor in oscillation - purposefully not 'controlled'.

    Leave a comment:


  • Inquorate
    replied
    Potentiometers

    @ Sucahyo - you were right. Flames, yellow (ugly) sparks, fuse box blew. I'll get a step down transformer tomorrow

    Leave a comment:


  • mlurye
    replied
    Here is schema that I found Joe Tate: Ambient Power Module That does collect radiant energy. And actually it does work. I did put it quickly together without doing much of tune ups and it was charging caps. Even so it's doing it very slow, but no power supply connected.
    Instead of antenna I was using ignition coil. And if in near proximity you will turn on Self oscillating Ignition coil you will notice how quickly it will start accumulating charge.
    I think it should be hart of any radiant energy collection schema

    Leave a comment:

Working...
X