Peter Daysh Davey Water Heater Query

[RAMSET]

Wow

You'll have to walk me through that pic posting technique??
We'll come to think of it ,I have a helper on this project now
I'll have him figure it out !

S
Do you have any info on the drive ring size {ikea]
I am not cutting this one until I try the new Kids [Ares123]idea
I havent gotten the "AMP" from my son yet for Tuning ,but this thermos really does ring if you tap it ,may be Ares idea will yield results ,I'll place a ring and do a wet run with 220 ?
I can always cut it!!
Thanks
Chet
PS
Ring size??
PPS
I see Core just posted ,Good to see you Bud!!

[Core]

Well done

Good work men, I been tied up at work, ironically working on boilers and heating systems. I simply have no time at the moment to continue building. I have been doing some reading and when I get some time back (3-4 weeks) I'll be ready to roll and continue building. I started my next generation device using copper weeks ago but lost my free time.

BTW One concept I was going with was using a 1:1 isolation transformer. This will allow you to 'un-ground' the neutral in a 110 volt system. Here you have a floating neutral like they had in the old days of delta transformers on power poles. If this is done then it becomes very important to run a ground wire into the system as there is no true ground on a floating neutral system. Also I figured this will create the best 'tank' circuit.

In your current 110volt system the ground wire is really just there for redundancy in the event the neutral gets cut. Neutrals are really just ground they are tied directly to the ground rail.

Good Luck! and keep it going

-Core

[Slovenia]

Photo Hosting

All of my photos are hosted by tinypics except when tinypics is down.

[Slovenia]

IKEA Flask Boiler Experiment (Cutting of Bottom of Flask)

IKEA Flask Boiler Experiment (Cutting of Bottom of Flask)

Inside Outer Bottom of Inside Flask


Bottom of Flask Totally Removed Exposing Two Separate Tubes


Outside Bottom & Two Separate Inside Bottoms Removed from Flask

[Slovenia]

Pipe Stretching

Wow, that pipe stretcher really does stretch those pipes out nicely. I think the stretcher will come in very useful.

Gordon
Thanks
Here's some pics of My soldiers

@S
You see the one pipe next to the Ikea thermos
That was stretched from 80MM to 90MM [Thermos runs 87MM {i believe]]
And I'll be stretching it a bit more!

Chet

[Slovenia]

Pics (Don't Use Energetic Space)

Hi Chet,

It's easy to post pics on Energetic without using their space. You just get a link from a free photo posting site such as (Tinypic.com). They are the site I prefer to use. Go to the Tinypic site and upload your picture to their site and then they'll provide you with some links that you post to your Energetic post. I use the link from the 2nd box from the top down. They have four choices for you at the Tinypic site. There are many other sites that have free picture hosting too but my experience has been that Tinypic works best for me. If you have any trouble using Tinypic, let me know and I'll give you some more direction.

Best Regards,
Slovenia

Slovenia
You said you had a link for pics ??

My forum space is running out
@Gordon
I love your stuff !! I share it in Many places !!

How do you post so many Pics and not use up your Allotment of space??

Thanks
Chet
PS
Prato welcome.............

[RAMSET]

I enlisted some soldiers

Gordon
Thanks
Here's some pics of My soldiers

@S
You see the one pipe next to the Ikea thermos
That was stretched from 80MM to 90MM [Thermos runs 87MM {i believe]]
And I'll be stretching it a bit more!

Chet

[MonsieurM]

My forum space is running out
@Gordon
I love your stuff !! I share it in Many places !!

Thanks RAMSET , I am registered with Image hosting, free photo sharing & video sharing at Photobucket

I just upload it to the server, and copy the link to the forum

you can find all the pics I uploaded here Pictures by MonsieurM - Photobucket , feel free to use them....that is why they are there for...to spread the the vibe so to speak

one condition though, mention this thread to enlist more people...winter is coming

[RAMSET]

Pics

Slovenia
You said you had a link for pics ??

My forum space is running out
@Gordon
I love your stuff !! I share it in Many places !!

How do you post so many Pics and not use up your Allotment of space??

Thanks
Chet
PS
Prato welcome.............

[Slovenia]

Nice!! (Wow)

Hi Chet,

Great to hear this!! It's very exciting. Disregard what I said about IKEA flask project earlier because there was a misunderstanding on my part. That project is still a go!!

Best Regards,
Slovenia

Made about 5 stops then I hit paydirt!!

Basically I went up the chain of supply till I found the local Stainless man
A wonderful guy who will work with me !!

S
I have rings for the thermos and Mr.C's device !! [all no charge]
I have enlisted the help of a young Man Here also !!

Thanks
Chet
PS
I see we have a new Kid "ares123"
Welcome!!

[Slovenia]

Thanks!! (Ares123)

Hi Ares123,

Thanks for clarifying your position to us. There are many detractors on this forum and now we know your intentions to us are positive. We look forward to hearing more from you. Also, if you haven't built a boiler yet, we would like to see you do that and share about it. You seem to have an interesting background from the way you speak. We appreciate all the positive help we can get.

Best Regards,
Slovenia

No offence please, you give positive references off all kinds to study. Thank You. But sometimes (when you focus on something) they are distractful.Positive for brain storming Yes but for serious job No.

Engish is not my native language so please forgive me if i cant express properly/polite. I think positive and really like your responses and links.

[RAMSET]

Chester is about to get busy

Made about 5 stops then I hit paydirt!!

Basically I went up the chain of supply till I found the local Stainless man
A wonderful guy who will work with me !!

S
I have rings for the thermos and Mr.C's device !! [all no charge]
I have enlisted the help of a young Man Here also !!

Thanks
Chet
PS
I see we have a new Kid "Ares123"
Welcome!!

[Slovenia]

COP of 5 (IKEA Flask Project)

I just heard back from my IKEA contact with the boiler that has a COP of 5. He explained that I misunderstood a previous message from him. He said that the picture I posted of his boiler is in fact not the IKEA setup but a previous version which does not have a high COP. His current version which incorporates an IKEA flask has a COP of 5. He encourages me to continue to build his IKEA flask device because he is still very happy with it and thinks it can be improved. So, please disregard what I said about the IKEA flask earlier. The IKEA project is still a go, so don't destroy your flask but wait for further instructions on how to build and improve it.

Also, he recommended that the IKEA flask be used with an open top and bottom scenario to improve flow. He also said the IKEA flask needs to be pointed down for optimum results. Anyway, more information to come on this. So, don't destroy your IKEA flasks!! Wait for further instructions!!

[Slovenia]

Mr. "C"

Hi Ares123,

Mr. "C" is not trying to put on a show for the forum. To be perfectly honest, I started sharing material from him which I didn't have permission to share on the forum. He saw my postings of his material here and said he was not angry and continued to share with me. I have built a mock up of his boiler and know that it works. It is a splendid thing indeed. My mock up system was not tuned yet, but I wanted something I could show to forum members quickly. Anyway, Mr. "C" is a great guy from Serbia who has continued to share with me. I have learned a great deal from him and have shared what I know about this boiler on forum with you guys.

Please show us pictures of your setup. Most people on this forum just watch us and we see no evidence that they are actually building anything. But, we have many critics who have not built the device and proved for themselves that it does in fact work very well. It is a phenomenal device to be sure.

Looking forward to see pictures of your device and learning all your details. Thanks for speaking out and being counted.

Best Regards,
Slovenia

1. MR.c. - from now on forget what he tells you because he wants to play with You more when he realizes that is all on public forum
Bigger can and 300HZ ring are nonsense I perfectly tuned more Europe cans to 60 hz rather than to 50 Hz as I need.
300Hz to match proper harmonics should be 480Hz ant that mistake from 1,7xxmm to 2,5 shold ring your bells

[daemonbart]

Welcome!

Please start sharing!
We want pics of your working setup!

Ok mr. S You seem like a good guy and thank you for your posts as it seems they are a bit naive.
I'am a lurker who reads this thread with intrest of outcome albeit i fear the longer threads go ,smaller is outcome as always on this OU forums.
I don't know who your contacts are but I know that I know serbian language and all texts You provide are double google translated so confusion and inaccurancy are great.
The reason I write this is that I dont want towatch struggle of a man who wants to accomplish something and we on the other side only watch and learn from you as seems every Your contact is hiding from you some information.
So I appeal to all lurkers to do something and share their findings here to help brave man who started this thread out.

1. MR.c. - from now on forget what he tells you because he wants to play with You more when he realizes that is all on public forum
Bigger can and 300HZ ring are nonsense I perfectly tuned more Europe cans to 60 hz rather than to 50 Hz as I need.
300Hz to match proper harmonics should be 480Hz ant that mistake from 1,7xxmm to 2,5 shold ring your bells

2. Ikea flask - why do you cut it in first place? If you take common china made thermos flask 1l and grasp it not punch it it will give you 50Hz peak (not resonance peak) in audicity

So if you contac says Ikea flask let him tell you how exactly is done dont let be fooled.

On picture with pipes you show(thank you) there is no thermos flask anywhere, because there is no one it is simple pipe with two insert pipes , one rings at 50 and one with 400 Hz.
And then they tell you it is not ok. If it gives COP 5 out ??? are we serious
We have no working Cop 1 to say and somebody promisse you 12 and then we discredit 5 as too low - hey

Well, I have heard these flasks come in different sizes

Now is time to ask Your contacts REAL questions or they should shut up, If it is possible to acomplish, we can get there anyway by ourselves
So we should join forces. I appeal on all just lurkers to add up. Nothing counts if you have sonic boiler in your basement - share with people that is the greatest thing you can do in your life. Free humanity and Earth of oil and do something for Earth and pollution and future of our children.

Dont hear this!
MonsieurM - calm your immagination, do only one focused thing at the time and ....

Best rgds D