ENLIGHTENED MAGNETISM (The Full Proof of Ken Wheeler's Theories)

[Ufopolitics]

Magnetism Plasma Test...

Hello to All,

I am really pleased to share the following Video that a subscribed member in YT linked to me...

[VIDEO]https://www.youtube.com/watch?v=2B-lKgcQJvg&t=0s[/VIDEO]

PLASMA IN A MAGNETIC FIELD

Awesome Views!!...it clearly shows the fantastic Magnetic Field Spin!!


Regards



Ufopolitics

[aljhoa]

The Way

Hello to All,

Even though I have been very busy, here is the Enlightened Magnetism Part IV.

It is about the Optical Delusion that Iron Filings has created for so long...

Revealed by Three State of the Art Methods...You will witness the Radical differences between Attract and Repulse Spatial Interactions Patterns...

[VIDEO]https://www.youtube.com/watch?v=4v5YsV_M5hc[/VIDEO]

ENLIGHTENED MAGNETISM PART IV, IRON & LIGHT




Hope You All would Enjoy it.


Regards


Ufopolitics

[Ufopolitics]

Enlightened Magnetism IV, Iron versus Light Spatial Interactions

Hello to All,

Even though I have been very busy, here is the Enlightened Magnetism Part IV.

It is about the Optical Delusion that Iron Filings has created for so long...

Revealed by Three State of the Art Methods...You will witness the Radical differences between Attract and Repulse Spatial Interactions Patterns...

[VIDEO]https://www.youtube.com/watch?v=4v5YsV_M5hc[/VIDEO]

ENLIGHTENED MAGNETISM PART IV, IRON & LIGHT

After optical delusions caused by "forced enchainment" of Iron Filings Method ...

...Maybe an "Attraction" was never meant to be the way we all still believe it is...

But just a mere Repulsion of two never compatible alike poles, never fused together vortexes of different pressures...

which, despite same facing direction of spinning...both actually are seeking disappearance (voidance) into the farther Field's of like Polarizations with
equal pressures...and aligned origins.

While a "known" "Repulsion" are just two perfectly compatible Counter Spinning Vortexes of identical Pressures...

Blended together in harmony to deliver Highly Compressed Radiant Aether Energy...


Sometimes reality could be harder to accept than Science Fiction...

Hope You All would Enjoy it.


Regards


Ufopolitics

[vidbid]

I found this old post from Vidbid...where He displays all new and working links to get the book.

ARCHIVE.ORG.KEN'S_BOOK

Try to read it Wonza...As all interested on this Thread...if You do not read this FREE ebook above...You will never get to understand the FULL concept(s) being developed here.


Regards


Ufopolitics

https://ia802502.us.archive.org/31/items/magnetism1small/magnetism1small.pdf

[Ufopolitics]

Hey UFO

I stopped in to read the other day and I see you have built a new generator.



This is sort of what I already built, a while ago, except I used arduino to pulse the coils.
You know, the arduino has, I think, 13 digital output pins. If you used arduino, you could make the generator completely motionless. Or is there a reason you don't want to use arduino. Maybe you used more coils then arduino has output pins.
Anyway, I wish I had more time, but I got nothing, I'm swamped.
Regards

Hey my dear old friend!!

It is great to hear from one of the few best builders on this whole site!!

I do have Arduino...but I wanted to build first a raw model powered by my small rotary switch in order to capture the proper signal developed.

And yes, I am using more than 13 inputs...it is a 20 Pole Motor Armature (fragmented) with 20 overlapped Coils to excite the generating fields. And what am doing is simple...just "motoring" those 20 coils fields without moving them at all....what I am moving are just the fields.

I remember clearly when you were spinning a virtual field in that small Toroid, reproducing the Tesla Rotating Field...and it was awesome!!

Thanks for stopping by and please find some time at least to check this place out!!


Warm Regards old friend, always a pleasure to hear from you.


Ufopolitics

[machinealive]

Hey UFO

I stopped in to read the other day and I see you have built a new generator.

Quote:
Originally Posted by Cornboy 555 View Post
Hey UFO, count me in on builders thread, surely i can find something laying around here to modify to spec.

Warm regards Cornboy.

Hey old Friend!!

It is great news to hear you will be joining Us in the Building Threads...

I consider You one of the GREATEST BUILDER, on this whole FORUM.

Then I will wait to hear from MachineAlive...another EXCELLENT BUILDER.

We need You ALL, to help me demonstrate ALL of this Projects work, and they are real.

TO THE MACHINES!


Warm Regards


Ufopolitics

This is sort of what I already built, a while ago, except I used arduino to pulse the coils.
You know, the arduino has, I think, 13 digital output pins. If you used arduino, you could make the generator completely motionless. Or is there a reason you don't want to use arduino. Maybe you used more coils then arduino has output pins.
Anyway, I wish I had more time, but I got nothing, I'm swamped.
Regards

[Ufopolitics]

Theory and Reality...

I've not read the book, I will try to find some time to do so. I did try a while back but didn't have the time and it was quite heavy reading

Yeah, I know they are Ken's theories, didn't mean to confuse. I did read the whole thread, like I said I need to reread parts though. I get the parts about the vortex spin and how at either end of the magnet is spinning in effectively the same direction, and the corkscrew effect attraction/repulsion etc.

It seemed like you started posting some basics in post 700, and in 701 you went much deeper into the discussion and then in 703 you went full on into a build, and I just didn't get how they related- sorry if I'm being dumb, I just want to really understand. I'm wondering if you could illustrate the concept with just one coil and a basic switch. Maybe a basic experiment someone could build from scratch? Or how would you explain the concept to a bunch of students for example?

I'll read the book anyway, or try to at least, and hopefully I'll start to get it more. Thanks for your effort Ufo!

[wonza]

Thanks for the link

I've not read the book, I will try to find some time to do so. I did try a while back but didn't have the time and it was quite heavy reading

Yeah, I know they are Ken's theories, didn't mean to confuse. I did read the whole thread, like I said I need to reread parts though. I get the parts about the vortex spin and how at either end of the magnet is spinning in effectively the same direction, and the corkscrew effect attraction/repulsion etc.

It seemed like you started posting some basics in post 700, and in 701 you went much deeper into the discussion and then in 703 you went full on into a build, and I just didn't get how they related- sorry if I'm being dumb, I just want to really understand. I'm wondering if you could illustrate the concept with just one coil and a basic switch. Maybe a basic experiment someone could build from scratch? Or how would you explain the concept to a bunch of students for example?

I'll read the book anyway, or try to at least, and hopefully I'll start to get it more. Thanks for your effort Ufo!

[Ufopolitics]

Thanks Vidbid!!

I found this old post from Vidbid...where He displays all new and working links to get the book.

ARCHIVE.ORG.KEN'S_BOOK

Try to read it Wonza...As all interested on this Thread...if You do not read this FREE ebook above...You will never get to understand the FULL concept(s) being developed here.


Regards


Ufopolitics

[Ufopolitics]

Hi Ufo,

I keep popping into this forum now and then and this thread caught my eye and I've just finished reading through it. Though I will need to read through some of it again

Hello Wonza,

Did You really "finished" reading through it?

Did you read Ken Wheeler's Book, Uncovering the Missing Secrets of Magnetism and went through his Book related Thread also?

Did You watch ALL my videos related to this Thread?

I'm wondering how your theories on magnets (very interesting btw) relate to the setup you have proposed?

They are not my theories...read above, re read this Thread FULL Title.

I am more from a computing background (though studied Physics basics at college). So I'm more familiar with Arduinos etc. What would be a basic setup using an Arduino for this? If I were to build a/few basic coils to show something working?

I'm not fully understanding how/what this is supposed to work yet, but it has peaked my curiosity. I'm always opened minded to this type of thing, as when I was studying Physics I felt like something was missing in the whole magnet 'explanation'.

It is almost an impossible deal for me to just explain it ALL in a "couple of posts, Wonza...if you did not read and watched all of the above I have ask if you did...

Processors (Arduino's ) and programming the required signals...would be the VERY last, end of this whole and long Thread(s)...

I am sorry Wonza, but looking for a link to Ken's Book at his Old Thread for You...I found some broken links...plus a Sign at one of the sites where he had his download ...take a look:

[IMG][/IMG]

That site offered pdf books downloading for free...his book was there...

Regards


Ufopolitics

[wonza]

Theories

Hi Ufo,

I keep popping into this forum now and then and this thread caught my eye and I've just finished reading through it. Though I will need to read through some of it again

I'm wondering how your theories on magnets (very interesting btw) relate to the setup you have proposed?

I am more from a computing background (though studied Physics basics at college). So I'm more familiar with Arduinos etc. What would be a basic setup using an Arduino for this? If I were to build a/few basic coils to show something working?

I'm not fully understanding how/what this is supposed to work yet, but it has peaked my curiosity. I'm always opened minded to this type of thing, as when I was studying Physics I felt like something was missing in the whole magnet 'explanation'.

[Ufopolitics]

Old Technologies into One Single Fusion...

Hello Bistander,

What I am doing is nothing but just Fusing -Long Time- existing Technologies into One...So, actually there is absolutely nothing new here, except the fact of reversing the Symmetric Armature Structural Concept with the Single Commutator Lap Winding:

[IMG][/IMG]

Above is a frame from an animated track I did for Asymmetry To Enlightenment Video first part...back in 2012. Basically what am showing there is the fact that the Virtual DC Magnetic Field in these kind of motors remains Static in their Armatures, while rotor spins. (We all know there is a distortion of the field polarity division, which does not delivers "exactly" a perfect line as shown above...but still, that stretched "S" look alike division between poles remains static IF all input to motor remains constant).

Real Poles Division Line according to Rotation R:

[IMG]incorporated to an Induction Process regeneration...that Self Exciting Generators use in their Exciting Circuit. And here is where I am concentrating right now.

[IMG][/IMG]

I could not put the above image any simpler than that...to show how this LC Circuit, incorporated to the rotary Induction Process keeps that DC Field alive during the Isolated Generating Fields Output.

It is a completely Regenerative Closed Circuit where both small components , low voltage/low amperage functions (LC and reciprocating Rotary Induction) keeps exchanging (or could write "transforming" as well) the energy back and forth, just to keep the rotating DC field alive.

All Input required to this closed system is a Rotation of the Magnetic Field...

Any Generator (My 6K Brushless Meccalte for example) when I bought it brand new, in its manual said to give the running cap an external charge...before connecting it for output...well, that is all you need...unless you short out that cap...it will keep at least a minimal charge...that whenever spinning the Rotor Field Magnetic reminiscence will start the regenerative process, then recharging cap to running conditions and producing an output at mains.

The more or less turns at armature is dictated to me based on experimenting with this regenerative circuit first, until reaching the constant magnetic field output and monitoring the current values not decreasing but amplifying with the increase of the rotational speed of the virtual field.


Thanks for your concerns Bistander.


Regards


Ufopolitics

[bistander]

Coils

[IMG][/IMG]

Above is the Image of my current set up, it is based on a 20 pole static armature and a 20 elements commutator at rotary switch. Each Coil Pitch takes Five Poles.

I am using only two brushes spinning, ...

[Ufopolitics]

High Speed Rotations...

Hello to All,


At high speeds rotations of the virtual field, it will tend to take the armature with it...reason why it must be secured to outer iron generating fields frame and insulated.

A warning...try not to get your hands inside static armature hole, (where iron rotor goes) basically when field is going at high speeds...unless you are a kind of "dare devil"....and want to feel the real high intensity Vortex Forces developing within...all in your hand.

But it is an amazing strength even at low voltages.


Regards


Ufopolitics

[Ufopolitics]

The Testing Set Up

Hello to All,

[IMG][/IMG]

Above is the Image of my current set up, it is based on a 20 pole static armature and a 20 elements commutator at rotary switch. Each Coil Pitch takes Five Poles.

I am using only two brushes spinning, this way, the 67 ohms total resistance taken from OEM Rotor Field, is here split into 134 ohms at northern coils(blue) and 134 ohms at southern coils(red), this gives me a 13.4 ohms per coil, which is even "roomy" for the wire size gauge I am using...

And by the way, I found an easier formula to obtain Rt in Parallel Circuits, given R1 and R2 in parallel:

Rt= R1XR2/R1+R2

But getting back to above diagram, this paused instance of rotating brushes sweeping static commutator at switch, gives me Two Main Coils at North (C5, C6) which are projecting their pure-not interleaved by opposite poles coils- North Influence at top right, as there are C15, C16 projecting their South Influence at lower diagram area.

These Four Coils are ruling the strongest magnetic influence 3D Field at this paused time, and this effect does not take place that "radical", since there is always a kind of "smooth blending" between coils. However, the amount of poles influencing their strongest magnetic fields would embrace exactly a total of six poles for north and six for south...And this MUST BE EXACTLY the same face area of your OEM Rotor Field



[IMG]THEN IRON ROTOR WILL SEEK STATIC ARMATURE VIRTUAL FIELD STEP ALIGNMENT:

[IMG][/IMG]

Now the weaker area defined by the Brushes plane-Dielectric Field takes place in any magnetic field, even if we call it Bloch Wall or Equatorial Plane...this is the weakest magnetic strength area. And the point here relates to the Rotor Design Shape...which note I have made some kind of "waist" reducing its mass, in order that this "crossed polarity influence" will not affect its ferromagnetic material. This way the strongest magnetic concentration from N-S Polarizations at static armature would be comprehending exactly the amount of poles (six per magnetic pole in this set up) by this iron rotor heavier mass ends.

And so try to play it in a full rotation on your minds...and make it run faster and faster every time...

I had some small delay issues due to a broken air compressor belt which took me a while to get (I work with hand air tools most of the time)...which set me behind a bit...but am back again at work.


Regards to All


Ufopolitics