Bedini Earth Light

[mikrovolt]

This water battery is available 3 for $135 includes shipping
The details about these AA and specifications can be viewed here:

water cell AA

[plengo]

i thought about that also, and in my experience it doesn't boost up the power much and also if you have a group of cells connected they will short out... so far the best results are from the hydrate cell bedini made, which is submerged in water.... i hope its still powerful.

Fausto, how are your experiments with the submerged cells? im looking forward to see those results

That was a very quick experiment. They do not work for very long. The water becomes more alkaline (surprise) and the cells reduces its output substantially although it does not stop.

Letting the cell totally dry restores it to its initial life and all is good.

Under water will not stand for a long time, specially when shorting the wires like I did. I only did that to show some folks that excessive water will not kill certain types of cells.

Some cells will die with too much water and others loves it just like I showed on the video. Water will eventually dilute the solution and "wash out" its internal electrolyte causing the cell to diminish in power.

Fausto.

[cgalvisardila]

I was just wondering, and i don't mean to derail the Discussion , if during your experimentations, have you tried burying any of the formulated Batteries...as it is Bedini Earth Light .... thought this Avenue worth exploring

i thought about that also, and in my experience it doesn't boost up the power much and also if you have a group of cells connected they will short out... so far the best results are from the hydrate cell bedini made, which is submerged in water.... i hope its still powerful.

Fausto, how are your experiments with the submerged cells? im looking forward to see those results

[plengo]

I was just wondering, and i don't mean to derail the Discussion , if during your experimentations, have you tried burying any of the formulated Batteries...as it is Bedini Earth Light .... thought this Avenue worth exploring

I did one in my plant but somehow it killed the cell in 2 days. Very strange.

Fausto.

[MonsieurM]

I was just wondering, and i don't mean to derail the Discussion , if during your experimentations, have you tried burying any of the formulated Batteries...as it is Bedini Earth Light .... thought this Avenue worth exploring

[jehdds]

Thank you, I found just what i needed. Do you use them?

IB,
Yes I do order from them. If you need materials, except for Mg, they are great.
Very Best Regards,
Jim

[ibpointless2]

Try Mc Master Carr,
Look for high temp conductive graphite.
McMaster-Carr
Very Best Regards,
Jim

Thank you, I found just what i needed. Do you use them?

[jehdds]

I've been really busy with work but I have been able to make a Crystal glue cell panel. Each group has 3 cells in series which gives me 4.20 volts and it has 12 groups. I've gotten a little better at making these cells and instead one single cell giving me barely 20uA I now got some that give me 100uA or more. In that panel the lowest producing cell is at 45uA and I have quite a few high producers giving me close to 200uA. Each cell is a little bigger than a quarter. But this is still not good enough power. So now I'm working a super thin version that is made of paper and aluminum foil, I can make this very long and then roll it up so that it applies pressure.

Does anyone know where I can get a block of graphite?

[ATTACH]10538[/ATTACH]

Try Mc Master Carr,
Look for high temp conductive graphite.
McMaster-Carr
Very Best Regards,
Jim

[ibpointless2]

I've been really busy with work but I have been able to make a Crystal glue cell panel. Each group has 3 cells in series which gives me 4.20 volts and it has 12 groups. I've gotten a little better at making these cells and instead one single cell giving me barely 20uA I now got some that give me 100uA or more. In that panel the lowest producing cell is at 45uA and I have quite a few high producers giving me close to 200uA. Each cell is a little bigger than a quarter. But this is still not good enough power. So now I'm working a super thin version that is made of paper and aluminum foil, I can make this very long and then roll it up so that it applies pressure.

Does anyone know where I can get a block of graphite?

[Michael Kishline]

Copyright Infringement Energy from the Vacuum.

@John Bedini

I don't know if you allow this person to upload some of your energy from the vacuum videos but he has Energy From The Vacuum Part 18..m4v - YouTube

I think having some of your energy from the vacuum videos on YouTube is a great idea. If enough people watch them then you can become a YouTube Partner and make some money from the ads they post next to your videos.

In the part 18 of energy from the vacuum (Energy From The Vacuum Part 18..m4v - YouTube) You talk about crystals. You even mention these crystals acted like componets and would boost singals and boost power. Do you still work on these crystals? These crystal were the coolest thing i've seen, Do you have anymore videos of them doing something like powering a amplifier? Also a bit of a odd question what is that bump on your right arm?

Thanks.

I've already notified Anthony and Patricia Craddock, the producers of the Energy from the Vacuum Series.


Thanks for your help and watchful eye.

Mike

[ibpointless2]

@John Bedini

I don't know if you allow this person to upload some of your energy from the vacuum videos but he has Energy From The Vacuum Part 18..m4v - YouTube

I think having some of your energy from the vacuum videos on YouTube is a great idea. If enough people watch them then you can become a YouTube Partner and make some money from the ads they post next to your videos.

In the part 18 of energy from the vacuum (Energy From The Vacuum Part 18..m4v - YouTube) You talk about crystals. You even mention these crystals acted like componets and would boost singals and boost power. Do you still work on these crystals? These crystal were the coolest thing i've seen, Do you have anymore videos of them doing something like powering a amplifier? Also a bit of a odd question what is that bump on your right arm?

Thanks.

[Zardox]

I know that John was messing around with the converting lead acid to Alum link when he decided to abandon the dry cells and go with a flooded cell for more amperage. He say's that Copper is good and Magnesium is good. He also said that the electrolyte needs to be a sulfate and that is acidic which will eat the Magnesium. So the electrolyte needs to give off something in the process to coat the Magnesium thus protecting it. Has anyone tried Copper Sulfate?

[NickZ]

I don't know about the vortex within, but, I liked the music. Kinda got me going.
Interesting vortex in magnetic field experiment - YouTube

[area46241]

Soap cell 2...

The mag/soap combo improved to 1.7v with pencil graphite the amperes were .8 milli amperes with half the two centimeter emmbeded in the soap...soap is part lye ...alkaline in a hydrocarbon wax would that be a hydrate? well anyway there's my two cents for today ...Damo

[jehdds]

Hi , everyone i wanted to say i value each individual in this group , i would have loved to been of more help here , but money is real tight and loosing the internet tonight so i make the best of it , and take time to thank each of you guys personalty , subecause reality starts with a vision ccess for all is only days away !


I also leave this here it is observation about resonance and energy transition,
in the stuff... lol i know its not the place but i don't have time to do it right.

Its not elegant but i think illustrates the point . I am sure most know ...

Resonance 101 test what tesla test it !

Mark

Mark,
Your insight and explanation are met well. Thank you for your sharing this VERY important information. Utilization of a frequency generator to check coils for matching is splendid insight. Success for all is only days away is very encouraging and needed to be sure.
Very Best Regards,
Jim