Bedini Earth Light

[cgalvisardila]

Mythbusters Free Energy "Busted" - YouTube

allwest, ive seen this... it seems like they are busting it on purpose, free energy is very real

not given up at all, im waiting on some materials to test a new approach based on some faraday's clues, i'm gonna take a turn to radiant instead of hydro... might be worth another shot to go for dry cells, i know galena picks up radio waves that can be used, many minerals pick up UV and gamma, like zincite ad bismuth germanate, selenium... see them glow under uv light, cheers, hang on, its gonna get good soon if we keep it up

carlos

[ibpointless2]

It sure has gotten quiet in here.

I hope everyone is doing well, has anyone been playing with something new?

I'm glad to report that I got some new stuff i'm working on. I got a new liquid that works like water but its not water so that's a plus, so instead of adding water to a cell i add this new liquid to it instead. I also like to report that keeping cells in vegetable oil really helps out a lot. I got a crystal glue cell and a pressure cell both in the vegetable oil. The oil keeps the cells from being affected by the outside environment so things like humidity don't affect the cells, also some of the trapped water gets separated when the cell is in the oil so that helps to fight off water. I'm also charting the cells in the vegetable oil, around the same time everyday i get the same voltage reading and amp reading but at different times in the day i can see a voltage change.


I hope no one has given up just yet, we have much testing to do.

[Allwest]

Mythbusters Free Energy "Busted" - YouTube

[Allwest]

The Truth Behind The Energy Lie (Supression Of Technological Evolution, The Evidence) full movie - YouTube

Interesting

[NickZ]

Kyle:
Like I said, NOBODY, has been able to replicate this.
Many have tried. And Thomas is no longer available for questions as to why it does not work as shown. I'm not saying that it doesn't work. But...
Maybe YOU can try it, and see. I would not risk, it or lead anyone on.
Several years and a lot or waisted time money and aggravation have been spent on this. It only puts out as much as the smallest and cheapest of solar panels, IF what he said is even true.
If you don't believe me, check it out for yourself, there's a whole Pyramid thread on OverUnity.com, that was started by Thomas, and there are still people waisting their time on this, even now after 100% failures.
The part about the HV polarization of his capacitor, was the only thing that has been able to be reproduced to a small and limited degree.
I wish that it had worked as shown... but it may have been be a farce, I don't know, and we may never know. I do know that it is relatively expensive, big, clunky and time consuming project, especially the time spent trying to get it to work.
NickZ

[Herbie687]

We have some friends in Hong Kong

This is an awesome article! Glad to see that are some free energy battery experiments are being done in university labs.
Graphene battery demonstrated to power an LED
The next thing they should do is to majorly cool it to see if it dies to verify that it is really thermal.

[Herbie687]

It does work, it's just been forgotten.

It may have "worked" for Thomas the "pyramit man", but not for all the others that followed him down the road to nowhere.
I guess we'll never know, if it really works, or not, as he was another one that stopped posting.... and disappeared into the blue.
NickZ

Nanotec99 - YouTube
@Everyone - Watch his tutorial the whole way through to see this proven free energy device work. Maybe we could incorporate some of the concepts here with the cells, especially the polarization techinque.
(What is very impressive was that he acomplished AC Free Energy with barely any knowedge of electronics or chemistry, so excuse his ignorance when he uses some wierd vocabulary.)
Note: The second transformer coil that he "trims" is actually a just a coiled capacitor. (He hooks one primary and one secondary in series.) This is also very interesting.

We should also look into vector equilibriums, 64 tetrahedron, buckyballs, ect. to see if molecular geometry plays a part in the energy tapping.

Me and my partner will also publish our findings on the our crystal cells (Bedini's Star Cell Formula) via pdf & video soon. We had formalized the whole experimentation for our senior projects.

[ali2012]

ok ok ok

@Mikrovolt
I am glad that you started a seperate thread for this. I partially replicated it today and it is very different.

@John B.
Well I almost got the whole thing done but my graphite & magnesium battery was a little too small to run it. It is an interesting circuit. Mine will run all the way down to .65 volts but the amp draw was pretty high.

Here is the video of it working:

YouTube - Bedini Earth Light----replication.ASF

Lidmotor

[Allwest]

Thanks
That would be interesting...how would it be done ? electrodes either side of it dry and then maybe pu......heck i'll be back in a minute lol, got a few unused shells in a bag still.

Ok, I tried a lobster crab type curly shell, because it may hold a barrier to any liquid.
Plain copper and galv steel electrodes showed 0.2mV dry. A couple of drops of rainwater were added and the reading went to 0.929V, but only 16uA. The voltage went down over a couple of minutes and stabilised at 0.710V. I'll expect it to drop off as the shell dries out.
Here it is running an LED oscillator, sorry about the pic quality. May well do more experiments with these shells.





Woah now! I just cottoned on to what you meant and tried the actual running seashell, with the same electrodes. Was seeing up to 198mV off the outer shell. Different readings in different places and only touching the tips of the electrodes to the shell. That was surprising

Slider2732

If you tried a shell as one of the electrodes, maybe put salty sand in the shell and put a copper or galv electrode in the sand without touching the shell

Read off the shell and copper or shell and galv


Calcium in the shell should make a high Neg electrode, and should give you a high reading on your voltage, so maybe copper would be the better positive electrode, if the theory is correct

[Slider2732]

Thanks
That would be interesting...how would it be done ? electrodes either side of it dry and then maybe pu......heck i'll be back in a minute lol, got a few unused shells in a bag still.

Ok, I tried a lobster crab type curly shell, because it may hold a barrier to any liquid.
Plain copper and galv steel electrodes showed 0.2mV dry. A couple of drops of rainwater were added and the reading went to 0.929V, but only 16uA. The voltage went down over a couple of minutes and stabilised at 0.710V. I'll expect it to drop off as the shell dries out.
Here it is running an LED oscillator, sorry about the pic quality. May well do more experiments with these shells.





Woah now! I just cottoned on to what you meant and tried the actual running seashell, with the same electrodes. Was seeing up to 198mV off the outer shell. Different readings in different places and only touching the tips of the electrodes to the shell. That was surprising

[Allwest]

Slider2732,

I love that sea cell

Have you tried taking a reading off the shell?

[Slider2732]

Oh! while i'm here though and I don't think i've mentioned this...mention must be made to a cell that has no notes or anything. It was lost down the side of the bedroom dresser last year in December and forgotten about. I found it a couple of weeks back when tidying, because the blue light was flashing !
Absolutely no idea what's inside, as it was forgotten about
However, I do know it was the first to use standard unfettered with epsom salts, straight out of the bag and sprinkled as a top layer. Those crystals have remained looking the same, instead of drying out to tiny little pellets as some subsequent cells have done.
Regular copper and galv steel electrodes, the copper has a very slight green covering where it meets the perhaps surprisingly open air mixture. It sits in an aluminium capacitor can.
How this thing is still going beats me.

[Slider2732]

Regarding ZnO and months of running -



The seashell cell in the pic, taken just now, began running mid Feb 2012. About 2 1/2 months up to now.
It's not budged an inch in terms of output.. 0.736V and 2mA.
It has Factor 50 face cream as the mixing electrolyte ZnO (no water).
Of note to your question Nick, of corrosion...it has burnt copper as the positive and galvanized steel as the negative. Neither is showing any signs of corrosion. It's sealed, by way of white glue around the edgings of the lower piece of seashell and has run a 'Penny' oscillator continuously.

Vid from the start of March, describing the cell in the second half of the approx 3 minutes:: 1.5V mains lightbulb + Sea cell seashell battery - YouTube

[NickZ]

Odd thing concerning the relation between the shape or geometry of some the cells, and their output. My strongest cell is really no different than some others that I've made using the same materials. Except for one thing, a triangular piece of brass that I use only to hold the carbon pieces against the aluminum strip, so that the c-clamp can apply pressure (piezo effect?) to both carbon and the aluminum. It really doesn't have any other effect, or, maybe it does, as I can't duplicate the same output (up to 74 mAs, without the brass triangle. Sort of reminds me of the picture of the amulet that you showed previously.

@ Carlos: Good luck with your tests.
The info about Moray's electrical devices is still all very intriguing. I also hope to see the day when someone is able to replicate his work.
Maybe that day will come, for you.
NickZ

[MonsieurM]

side note

did you know that some "magic" egyptian amulet were made of :

consisting of crushed quartz, lime and alkali, which first made in Predynastic Egypt.

Three-dimensional chemistry at grinding powder




During the normal grinding of powders in a mortar, the powders can enter into
chemical reactions with each other. This phenomenon has been known for years
but only now it has become possible to transform in this way three-dimensional
clusters of certain chemical compounds into other, also three-dimensional,
clusters. The spectacularly easy reaction was conducted by scientists from the
Institute of Physical Chemistry of the Polish Academy of Sciences and the Faculty
of Chemistry of Warsaw University of Technology. The discovery was brought
about by the development of a new method of creation of unique compounds that
are precursors of nano zinc oxide