Peter Daysh Davey Water Heater Query

[Slovenia]

Tuning Boiler Query

Making the sonic boiler is a very simple process which has been explained very thoroughly to us. Don't worry about the theory behind why or how the sonic boiler works at this point. It will only detract at this point and I don't want to exasperate the inventor with to many questions. I've already bothered him a lot on real specifics we need to know to build the device. I just want to build a working boiler.

The theory you are inquiring about is from old physics books predating 1900 or thereabouts. It is very dry reading indeed.

1- how do I tune my sonic boiler?
Response: Tune your aluminum can. The can must be cut to the proper length and the top walls sanded, thinned, until you get either 50 hz or 60 hz, which will depend on whether you are in USA or elsewhere.

2- Crystal latiice of what metal?
Response: The can is aluminum and the ring is iron. Don't worry about the theory behind why or how the sonic boiler works at this point. I don't want to exasperate the inventor with to many questions.

3- Am I supposes to somehow Crystalize the can?
Response: If you built your boiler to the provided specifications, nature will do all the work for you.

Thanks for your interest. I see you lurking in the background a lot.

1- how do I tune my sonic boiler?
2- Crystal latiice of what metal? Am I supposes to somehow Crystalize the can?

[MonsieurM]

Principle of Mentalism: The Universe is all wave see also http://www.energeticforum.com/162792-post937.html











compare the above image with the following:

from:Peter Davey -- Sonic Resonance Boiler

He said he first came up with the concept 50 years ago and it took him half of those years to figure out how to make the device.

"The principle is beautiful. I have cashed in on a natural phenomenon and it's all about music," he said.

"If I hadn't been playing the saxophone, I probably wouldn't have come up with the idea."

Davey noticed as he played the saxophone at home that everything resonated at a different frequency.

[MonsieurM]

since we are talking about Resonance, it maybe good to brush up on musical resonance.....so i found this book; which i am reading now....(mentions resonance in a bell )

Natural philosophy. Treatise 4 - Natural philosophy - Google Books

[RAMSET]

AhuraMazda
Quote:
Am I somehow supposed to crystallize The can.?

It comes from the factory that way [The Big Factory=}

I don't pretend to know how it works, but if the professor says it bounces ,focus's neutrinos in the crystalline subatomic Lattice of Aluminum.

I'm good with that!!
AS far as tuning ?

Slovenia can explain it better
Thanks
Chet

[Slovenia]

Peter Lindeman Voltage Doubler Circuit

I finally found Peter's circuit on one of my old backup drives, but I don't feel comfortable posting it here so I've sent it to another member and he may. I don't want any trouble with Peter.

I was going to post a link to it, but I couldn't find it anywhere. It used to be posted all over the place on Energetic and elsewhere. It's a very interesting circuit and looks very easy too. The skill level to build it would not be that high and so it's a great circuit for beginners or anyone for that matter. It is the personal property of Peter Lindemann however though!!

[Slovenia]

Thanks!!

Thanks, sorry for my late reply but I missed this post before somehow.

try this

SET OF TWO STAINLESS STEEL EGG RINGS PERFECT FRIED EGGS | eBay

and

Thermal Stainless Steel Travel Coffee Mug Cup Flask NEW | eBay

Instead of a can.

[AhuraMazda]

1- how do I tune my sonic boiler?
2- Crystal latiice of what metal? Am I supposes to somehow Crystalize the can?

[Slovenia]

Gap Space Scenario

Hi Boguslaw,

No, there is nothing but water between the ring gap and the can. There has to be resonance there and any added material would dampen and affect that resonance in an adverse manner.

Best Regards,
Slovenia

Is there something in gap between ring and can ??? Something else, not water ? Slovenia, did you asked such question to inventor ?

[boguslaw]

Is there something in gap between ring and can ??? Something else, not water ? Slovenia, did you asked such question to inventor ?

[Slovenia]

Doubler Circuit & New US Specs

Chet,

I have the doubler circuit somewhere. That's one I can't find since my computer problems. I don't see a link to it on Energetic now but it is there or has been removed. I've seen it in the past about five or so times.

He never got back to me on the can size, so I'm thinking 200mm is probably the size. That's the figure he gave us some time back and that's probably where it came from, his mock-up of US boiler.

Best Regards,
Slovenia

Slovenia

Do you have a link to Peters schematic? I would imagine that peter posts these things here for us to use in our experiments ,I don't think he posts them here for bragging rights??

Where is it? [We can post it here with a "copyright " statement]

Thanks
Chet
PS
I see your new Specs!!
Nice 2.52!!! thats it right there, decision made, its 220 for me!! tolerance is doable!!
Whats the can size??

[RAMSET]

Ever home should mave two 110 legs

Slovenia
I suppose it would be nice to have a voltage doubler[transformer], however we can have our 220 at No cost if you have some empty spots on each leg of you service panel .

Power your device the same way you power any 220 volt device in your home??
You can use one 220 breaker if it is in the correct spot on your panel,or two breakers one from each leg, then connect the hots for 220.

Do you have a link to Peters schematic? I would imagine that peter posts these things here for us to use in our experiments ,I don't think he posts them here for bragging rights??

Where is it? [We can post it here with a "copyright " statement]

Thanks
Chet
PS
I see your new Specs!!
Nice 2.52!!! thats it right there, decision made, its 220 for me!! tolerance is doable!!
Whats the can size??

[Slovenia]

Inventor Built US Model

Those specs the inventor sent a while back were from a model boiler he built to US specs for 220 volt. So, he's tested that boiler out and that's how he came up with the COP for it.
Sonic Boiler Diagram for USA


Anyway, I missed that in a previous post from him and wanted to make you aware that he made one of those up and tested it just for us. He wasn't impressed with the lower voltage version.

[Slovenia]

Ring Material

Ring Material:

I think it's very important that we go with a good ring material and I feel that titanium or a good grade of stainless steel would be our best options. I've used 304L and 316 stainless in the past on other projects and they work very well with a minimum of corrosion.

[Slovenia]

You Can't Build It??

I appreciate your constructive advice, but I beg to differ with you. If someone shows you how to build a device which defies the laws of logic and you do not know why the device works it will still work if you were given the proper directions for building it and followed those directions implicitly. This is a very easy device to build as I have demonstrated. I have also demonstrated that it works very well even though I did not tune my cans as instructed to do yet. I just wanted a baseline to build on to prove that the device is viable and that it is worth building.

The inventor is now sharing a little information as to why and how his device works. The device has been built on Tesla concepts which have been hidden from most of us for a long time.

Thanks for being a peaceful poster, duly noted and appreciated!!

If you can not explain to someone else how something works then you don't know. And if you don't know you can't build it.

Please take my post as constructive advice.

[Slovenia]

Peter Lindeman Voltage Doubler Circuit

Peter Lindeman Voltage Doubler Circuit:

It's posted on this website, Energetic Forum, The circuit is copyrighted so I am not at liberty to post it here but it is posted on this website, Energetic Forum, in at least one place. The circuit is reported to work very well and be very easy to build by anyone.

This may be an inexpensive viable way to make our 220 volt USA boiler. Let's discus it.