Peter Daysh Davey Water Heater Query

[RAMSET]

I'm old I don't "skip" [skiipe]

Call me ...[I'm using their office Putors over here, lucky to be on the net never mind Skippin !!
sent #'s
Chet

[Slovenia]

Fiditti

Hi Chet,

I'm Fiditti on Skype. Let me know when you want to talk and we can talk free on skype any time. If you are not a member on skype, it's free to join there.

I'm still just using 65.4mm diameter pop cans. I need to go out and get one of the taller 24 oz cans soon. I've just been up to my neck in home project stuff but finally had to take a breather from the power steering pump.

I'm pumped again after DM said his boiler gets up to over 1000 degrees centigrade. That's incredible!!

Best Regards,
Slovenia

You realize that could end up being "Priceless"??
Thanks for sharing your life experience,sometimes we forget ....,out of sight out of mind........[all to often].

You haven't told me which can yet? I am spending some time over at a friends place ,he owns a drug and alcohol rehab center in NY and I love coming around and teaching the Kids here.
I will be using one of his shops Manana [and fixin some of his broken things also]. seems like it will be at least two weeks till we get power again in Connecticut [yikes]. Seeing as how I live 15 minutes from the state capitol that's pretty wild??[not like I live in the mountains].

Thanks for the offer S I think I'll Email you my Phone number. would be nice to chat and discuss build procedures.

Chet

[RAMSET]

An "S" Original??

You realize that could end up being "Priceless"??
Thanks for sharing your life experience,sometimes we forget ....,out of sight out of mind........[all to often].

You haven't told me which can yet? I am spending some time over at a friends place ,he owns a drug and alcohol rehab center in NY and I love coming around and teaching the Kids here.
I will be using one of his shops Manana [and fixin some of his broken things also]. seems like it will be at least two weeks till we get power again in Connecticut [yikes]. Seeing as how I live 15 minutes from the state capitol that's pretty wild??[not like I live in the mountains].

Thanks for the offer S I think I'll Email you my Phone number. would be nice to chat and discuss build procedures.

Chet

[Slovenia]

Titanium Ring

Hi Chet,

Get back with me via e-mail with your address and can diameter, and I'll send you Slovenia manufactured Titanium Ring.

Best Regards,
Slovenia

[Slovenia]

You Got It!!

Hi Chet,

Yes, you are right. I was just trying to show DM we were on the same page. I used to be worried about that stuff a lot. It really messed with my head. Now I try to only think about the good stuff. I've heard there are some good things afoot as we speak that might change a lot of things for the better very soon.

Anyway, you are right about the poor folks out there. I was raised in Nigeria West Africa for 15.5 years and saw a lot of suffering and poverty. They were bathing in the open sewers and also drinking water out of them. The mean age for living over there prior to 1967 was 35 years of age. That was an old guy over there so that tells you something. People were starving and life was cheap. Anyway, when I was operating my experimental boiler, I saw all the gunk falling out of the water and I new this boiler was somehow cleaning the water too. Soon I'll be testing this theory with titanium rings. There was way to much gunk coming out of the water for it to just be a rusty ring scenario. This device may also prove to purify water too.

Anyway, your point is well taken and I will mend my ways!!

Best Regards,
Slovenia

S
Easy with the killin stuff!! There's no Killin in Baseball !!
And we gonna hit this one outta the park come what may!! And the more people you tell the better ,heck I talk to fellows all the time about this!!

Seriously, No more talk about the bad guys [Please]!
they get to much air time on these forums !! And yes Duncan We aren't just doing this for our bank accounts [or electric bills] ,we are the few they are the Many,The other 6 billion folks on this planet that can't even flush a toilet or get a clean drink of water they need our help!

To them we are the one percent...........

Lets change that shall we??

Chet

[Slovenia]

Tinypic

Hi Chet,

Yes, I use Tinypic for my picture uploads. What you do is upload your pic to Tinypic and then copy the link in the #2 box of Tinypic to your post on Energetic and you are good to go. It works great. Here's the link to Tinypic:
TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

What size are you building to? My can diameter is 65.4mm, so I have to plug in a few different measurements than what I shared on my newly updated USA ring tabulation post of the other day with all the mathmatics.

I figured that Harbor Freight was out of the expanders. They were here in Independence, Missouri. I found a really cheap source for stainless shim for my stainless rings. If anyone is interested I'll post that link again.

No harm done. I've been really busy painting the house and messing around with power steering pumps and the like. It's kept me from my experimentation. I'm looking forward to getting back in the game.

Best Regards,
Slovenia

Slovenia
You had posted a link?[I think]
For posting the Pix??
Can you post it again??
Thanx
Chet
PS
What size are you building to?[the Can ]
PPS
Slovenia
Something I keep forgetting to tell you................Sigh
I forgot to ship you the pipe expander ......If you had reminded me I would have remembered [its your fault ={ ]
Now I'm gonna play with it, unless I head over to the harbor frieght in NY??

Seriously, I will be shipping it out by Wednesday!!
Sorry????

[RAMSET]

Pic hosting

Slovenia
You had posted a link?[I think]
For posting the Pix??
Can you post it again??
Thanx
Chet
PS
What size are you building to?[the Can ]
PPS
Slovenia
Something I keep forgetting to tell you................Sigh
I forgot to ship you the pipe expander ......If you had reminded me I would have remembered [its your fault ={ ]
Now I'm gonna play with it, unless I head over to the harbor frieght in NY??

Seriously, I will be shipping it out by Wednesday!!
Sorry????

[Slovenia]

Ring W/Flap Keeper

1) I took some pics of my new rings for you to see. The flat one is to show how you mark them with fine tip magic marker before bending.
2) The bent one is to show the flap-keeper for tabs, to hold them in place

Attn.: I left a little more material on my flap-keeper than 6.5mm because I needed to also use the flap-keeper as a shim for my tabs to make them fit tighter in my slot on my 3/8" threaded rod.

Please Share Guys!!!! We do need you to experiment along side us and share your findings!!! Otherwise, this process could take a very long time and I don't think we have that much time.

Notice Ring with Flap Keeper for Tab!!

[RAMSET]

The killing stuff..............

S
Easy with the killin stuff!! There's no Killin in Baseball !!
And we gonna hit this one outta the park come what may!! And the more people you tell the better ,heck I talk to fellows all the time about this!!

Seriously, No more talk about the bad guys [Please]!
they get to much air time on these forums !! And yes Duncan We aren't just doing this for our bank accounts [or electric bills] ,we are the few they are the Many,The other 6 billion folks on this planet that can't even flush a toilet or get a clean drink of water they need our help!

To them we are the one percent...........

Lets change that shall we??

Chet

[Slovenia]

Daemonbart Thank-You!!

Hi Daemonbart,

Thanks for sharing with us. I get frustrated because I am way over my head in this stuff and could use some help and most of the audience is just watching waiting for me to provide something for them. Any help you are willing to share is very welcome. This is not my area of expertise, but I am a pretty fast learner and very interested in this boiler. Yes, 1000 degrees would be very hard on aluminum for sure. If the information is out in the open where everyone can see it the negative forces can't kill all of us. If we are few and our information is hidden it is easy to kill us and shut down the flow of information. Thanks again for what you have shared!!! It is great information indeed. I could use some help and that's why I get frustrated so easily. I have worked very hard on this project.

Best Regards,
Slovenia

Hi!

Thanks for solid moral support

It makes me feel better to know that you all are aware of being behind enemy lines

About tuning, please dont stop with that! I kind of jumped over serius tuning but will start soon.

Real info: I see really good proof that my cans (stainless) in some modes have been running at temperatures around 1000 degrees celcius when boiling water, maybe even higher

This could explain losing alu

About neutral and phase, I dont measure any difference in cop, I will check again

I will share more info about setups I have tried, just not decided how to yet!

Remember, I was lucky by picking info from you guys, so Iam not overunity but boiler is

Kind rgds D

[RAMSET]

Always like your Contributions!!

Duncan
A man of the Wrench? Some very cool things I see, and a propensity towards 2 Stroke?
Does Harmonies Evil twin dwell in the Fair aired breath of a 2 stroke??

And I see Gates has his Eye on an old yet novel rendering??
-------------
I just got back from my time at sea [very short time].This job mandates
a complete overhaul and the owner is crying real tears??

Sad............

But It gives me some play time and lots of willing fellows to play with .
I will be readying a can this evening and searching for a good ring material in the AM.
The owner here has provided me with a fancier phone for pics which I will be posting as I go!!

Gonna be fun!!
@Daemonbart
My apologies to your wife for saying "We Men" that was very chauvinistic
Of me ,While we don't have many women in these threads ,they are here.
And we have some very smart female talent that I rely on quite often for advice .
Besides It is my opinion that if we had more women experimenters we would have gotten to open source Over unity years ago!

Thanks
Chet

[daemonbart]

Tuning + Interesting info!

Hi!

Thanks for solid moral support

It makes me feel better to know that you all are aware of being behind enemy lines

About tuning, please dont stop with that! I kind of jumped over serius tuning but will start soon.

Real info: I see really good proof that my cans (stainless) in some modes have been running at temperatures around 1000 degrees celcius when boiling water, maybe even higher

This could explain losing alu

About neutral and phase, I dont measure any difference in cop, I will check again

I will share more info about setups I have tried, just not decided how to yet!

Remember, I was lucky by picking info from you guys, so Iam not overunity but boiler is

Kind rgds D

[Duncan]

The Chaotic Circuit I1956 Commer C7 MkIII TS3 2-stroke - YouTube

http://www.oldengine.org/members/diesel/Rootes-ListerTS3/TS3.htm

http://www.knvts.nl/S&W%20archief/The%20Sulzer%20diesel%20engine%20centenary.pdf

Sulzer (manufacturer) - Wikipedia, the free encyclopedia
Rootes Lister Blackstone (3 cylinder 2 stroke) TS3 engine in action. - YouTube
Bill Gates invests in new engine made in Troy - YouTube
RIP

[MonsieurM]

Message from Mr. "C"

Oct. 30, 2011
I want to help you practically and theoretically to make a Sonic Boiler and give cheaper warming.

Energy is free and is everywhere around us, only to catch the resonances to 1/4 wavelength to Taslima said ..
Sonic catches boiler scalar wave as an antenna, resonances to 1/4 wavelength and you use 3/4 height of a standing wave.
Scalar wave of light is faster than 1.54 times said Tesla and academician Professor Konstan Mail from Germania ..

Diameter of cans is 1/4 wavelength waves that capture resonances.
What is the diameter of the smaller cans to catch the wave has a higher frequency and more power within himself.
Tin cans of beer must be thin and long that can easily dojete 60 Hr audio frequencies. Cans of beer you have slimmed down to 60 Hz frequency sound.

By the way, Mr C is using what i recently discovered is Harmonic Math

sorry for the long quote

MonsieurM,

From the Bruce Cathie Grid Point Atlas Manula 2010

http://www.worldgrid.net/documents/g...as40manual.pdfhttp://www.google.com/url?sa=t&rct=j...lLSaSA&cad=rja

This may be a quicker link to the same file if still active and not having to wait:

Bruce L. Cathie - The Energy Grid - Harmonic 695 - The Pulse of the Universe.pdf - 4shared.com - document sharing - download

IndianaBoys

[QUOTE=MonsieurM;163316]and probably that is why Tesla used to weight his coils too, it is much easier than finding 5.914441183 feet

[MonsieurM]

Thank you Slovenia, you do me much honor to which you deserve the most for restarting this thread...Some realities need to be changed, all of us agree that this cannot wait any longer, and so we find ourselves taking matter in our own hands to discover the secret of the universe....we shall not remain blind to our oneness ...keep it up , we are almost there