Bedini Ferris Wheel Regauging Motor

[John_Bedini]

Big Bedini Motor

John K,
Right three different things right here all for you, just need to do the switching right. Magnetic PMH or re-gauging motor or G-field just different geometry . Very powerful motor if switched right. Best one of all is what ED was doing with the separation of magnets in the Iron bar. Don't let this spin your head, easy energy.
John B

[cody]

Cody,
Take an I iron bar, set the wheel east west then spin the wheel while the iron bar is facing north and south see if the iron bar charges.
I think I know what he was doing, here see if this picture helps everybody. as I said I'm not going for the anti gravity effect. If the torsion field works right above the wheel it would look like a tornado or a spinning Galaxy. This has all been done before. The chain has links that are ninety degree from each other that you only need to charge the first link. Then the links can use the B-field He has got the chain hanging in that torsion field.
John B

John
I tried the bar but i dont know what to look for. So i stuck a coil on the bar and sniffed around with it and my o scope, but saw nothing unexpected. I thought we were going to make a motor? Is this for "antigravity" mode? Ill keep messing with it.

Cody

[John_K]

Yes, John. I agree. Your pic looks like the G-field and works on the same principles. The rotor when aligned to the coils creates a closed flux path. Easy to see the way you have drawn it. Break the magnetic lock and collect the energy in the coils and sent it to a battery.

This is what you showed Tom C and I two years ago, but with the Monopole rotor.

Cody could make a 6-pole G-field generator with this as long as the switching is right.

Many ways to skin a cat, as they say!


John K.

sseti,
This will work if the magnets are super poles.
John B

[John_Bedini]

Big Bedini Wheel

sseti,
This will work if the magnets are super poles.
John B

Cody

In my opinion, your configuration will not work, due the way the magnets go. i had borrow your foto and had draw what i thing.
tadej

in the right side is one end just + and second -

[sseti]

Cody

In my opinion, your configuration will not work, due the way the magnets go. i had borrow your foto and had draw what i thing.
tadej

in the right side is one end just + and second -

[sseti]

Hi John
Looks to me that Ed tried to hang as much mass above the flywheel as possible, any metal would do as can be seen in the picture. Do you see how the heavy chain seems to be attracted to the middle of the flywheel instead of hanging downwards? He said in his book that in order to do something, you need to collect enough magnets first and only then you can use them. The whole iron mass could well be such an magnet storage thing.

I think, that the chains are there to collect from air as much magnets and keep them stored in soft iron of pwm, than when rotor - permanent magnets aproach, thej force them (stored magnets) to get out in that case also thru cooper wire - magnet current http://www.energeticforum.com/images/icons/icon5.gif

[John_Bedini]

Big Bedini Motor

Cody,
Take an I iron bar, set the wheel east west then spin the wheel while the iron bar is facing north and south see if the iron bar charges.
I think I know what he was doing, here see if this picture helps everybody. as I said I'm not going for the anti gravity effect. If the torsion field works right above the wheel it would look like a tornado or a spinning Galaxy. This has all been done before. The chain has links that are ninety degree from each other that you only need to charge the first link. Then the links can use the B-field He has got the chain hanging in that torsion field.
John B

Well things tend to sink into my brain better if i get hands on time. John was asking about a 12 super pole wheel and i had some time this weekend (although i should have been doing homework ) so i started putting one together to try and understand what he is talking about. With 12 poles i should have 6 switch points if im understanding correctly. I still dont quite grasp that, i would think i would need 12 switch points, one for each pole. Anyways, here is some pics of the wheel. 12 alternating super poles made from ferrite mags on a steel backing ring. You can also see the PMH core, a hacked up laminated E-core.

[ren]

Hi John
Looks to me that Ed tried to hang as much mass above the flywheel as possible, any metal would do as can be seen in the picture. Do you see how the heavy chain seems to be attracted to the middle of the flywheel instead of hanging downwards? He said in his book that in order to do something, you need to collect enough magnets first and only then you can use them. The whole iron mass could well be such an magnet storage thing.

or a huge inductance.

[cody]

Well things tend to sink into my brain better if i get hands on time. John was asking about a 12 super pole wheel and i had some time this weekend (although i should have been doing homework ) so i started putting one together to try and understand what he is talking about. With 12 poles i should have 6 switch points if im understanding correctly. I still dont quite grasp that, i would think i would need 12 switch points, one for each pole. Anyways, here is some pics of the wheel. 12 alternating super poles made from ferrite mags on a steel backing ring. You can also see the PMH core, a hacked up laminated E-core.

[redrichie]

The "front" of the flywheel is facing north. He had a good view of North. He made real sure he did. So important that he built the "telescope". The cross hairs point north. But I feel this has a lot to do with other things as well.
There are 2 points (wooden mounts) N/S around flywheel to collect. A third point directly above. A bar that intersects East West at Phi?

sseti,
Are you sure the chains are not already magnetized and that is why they look crinkled up. Is that not one iron block in front of Ed's generator so what is ED's generator?. Ed was insistence about gathering magnets, he said face north to south to gather them did he not.

The big box on top of the poles, that is a PMH charged holding the magnets, I will bet that is what is in that box. He has stated how to release the magnets from that device.
John B

[Jetijs]

Hi John
Looks to me that Ed tried to hang as much mass above the flywheel as possible, any metal would do as can be seen in the picture. Do you see how the heavy chain seems to be attracted to the middle of the flywheel instead of hanging downwards? He said in his book that in order to do something, you need to collect enough magnets first and only then you can use them. The whole iron mass could well be such an magnet storage thing.

[John_Bedini]

Big Bedini Wheel

Maybe this will help as it has been done before.

Roy J. Meyers: Absorber (Atmospheric Electrical Generator)
John

[John_Bedini]

Big Bedini Wheel

sseti,
Are you sure the chains are not already magnetized and that is why they look crinkled up. Is that not one iron block in front of Ed's generator so what is ED's generator?. Ed was insistence about gathering magnets, he said face north to south to gather them did he not.

The big box on top of the poles, that is a PMH charged holding the magnets, I will bet that is what is in that box. He has stated how to release the magnets from that device.
John B

In that picture I see a LOT of chains above the wheel, and each of chain is wrapt around something made of iron - so iron chain wraped around iron stuf (bicycle, hook, wheell,...). I suppose, that chain on the end is connected to wooden or iron box alongside of wheell, and above that "box" is iron? stick. I assume, that stick is facing W-E and "box" is on N side off the wheell (i saw orientation somewhere).
From the picture is hard to say whic direction are chain and all metal stuff above the wheell facing.

Tadej

[sseti]

ED's Flywheel what is it ?
What is ED doing in that picture standing spinning that wheel, Look at all the chins good. What is it that you see?
You need to think about Torsion Fields here at top of the machine.
ED is very insistent on which direction things face.

John B

In that picture I see a LOT of chains above the wheel, and each of chain is wrapt around something made of iron - so iron chain wraped around iron stuf (bicycle, hook, wheell,...). I suppose, that chain on the end is connected to wooden or iron box alongside of wheell, and above that "box" is iron? stick. I assume, that stick is facing W-E and "box" is on N side off the wheell (i saw orientation somewhere).
From the picture is hard to say whic direction are chain and all metal stuff above the wheell facing.

Tadej

[i_ron]

I_ron,
I just wanted to say that looks like it is step charging right. What is the capacitor in Mfd and the voltage on it? Good work. So you have just used a monopole right?
John B

Thanks John,

The cap is a 1000mfd, 200 volt, peak output volts only 25 volts.

Yes, just a monopole so far. Will keep at it!

Ron