Bedini Ferris Wheel Regauging Motor

[minoly]

I like the monopole theory.

are those weld marks I see, pounded forced metal?
kind of like what Floyd Sweet was doing with his magnets?

Patrick

[BrentA929]

A real magnetic monopole

John B,

That U shaped magnet is like nothing anyone has ever seen. A true monopole! Hidden magnetic streams. Isn't that why we are all here? Eager to hear more!!!

Hidden from view,

Brent

@ ALL,
Ok, I missed an important part some how in the video, I thought about this and did another video on this one part with the horseshoe magnet. In the best quality I could do. It may take some time to load. Watch the magnetic indicator. Also notice the magnet is shorted out with a steel wire through the holes. I know there will be allot of questions.
http://www.johnbedini.net/john34/Magnetcc.wmv Ed had a generator that did not move which supplied electricity that gave him light at night, This itam was never found anywhere. It is still there among the junk.....

John B

[alvarohn]

questions

Hi John,

could be the magnets in the rotor be also shorted with steel wire? and that is why the north pole does not show up in the magnetic indicator?

a copper wire winding arround that steel wire could give current?

best,

Alvaro

@ ALL,
Ok, I missed an important part some how in the video, I thought about this and did another video on this one part with the horseshoe magnet. In the best quality I could do. It may take some time to load. Watch the magnetic indicator. Also notice the magnet is shorted out with a steel wire through the holes. I know there will be allot of questions.
http://www.johnbedini.net/john34/Magnetcc.wmv Ed had a generator that did not move which supplied electricity that gave him light at night, This itam was never found anywhere. It is still there among the junk.....

John B

[John_Bedini]

I missed an important part

@ ALL,
Ok, I missed an important part some how in the video, I thought about this and did another video on this one part with the horseshoe magnet. In the best quality I could do. It may take some time to load. Watch the magnetic indicator. Also notice the magnet is shorted out with a steel wire through the holes. I know there will be allot of questions.
http://www.johnbedini.net/john34/Magnetcc.wmv Ed had a generator that did not move which supplied electricity that gave him light at night, This itam was never found anywhere. It is still there among the junk.....

John B

[BrentA929]

Coral Castle

Oh yeah!!!

Going to start getting good again! Can't wait for the discussions on this...

BTW, I never could picture the super poles with this arrangement. It was almost like they were forced together on the sides of the magnets. I wonder if Jetijs has seen this effect on his build...post 220.

Thanks John B!


Good stuff,

Brent

@all,
I thought that I would want you guys to watch this wmv that David Luke made for me. It was before I showed the big Ferris Wheel SG3 machine.Now some of you know that I made mention of the Coral Castle. It is not in any special order as I put it together.

I asked David to go there and take measurements for me of certain things, you will see. Well David basically takes over the place. Why I'm posting this because I want you to have every bit of information on what could be happening to magnetic fields in the machine. Watch what the wheel can do and then think about it. Also look at the Horseshoe
Magnet with open eyes.

http://www.johnbedini.net/john34/CoralCastle.wmv

John B

[john_g]

Thought this maybe on topic, a link to some info on horseshoe magnets as used on the Testatika, and charging a cap between the poles.

Testatika Linden Experiment

Also this links into Meyers work, who used horseshoe magnets, although in both cases the magnets were wire wrapped, in Meyers case with Iron wire. Maybe this indirectly helps solving this puzzle?

[minoly]

Yes - ditto, thanks for sharing that WMV John B.

horseshoe magnetic manipulation:

Edward Leedskalnin field manipulation - YouTube

lots of fun playing with one of those little magnets around our 7' Ferris Wheel also.

On the Ferris Wheel the souths are being manipulated in between the sharp norths (the magnets pointing outward are the sharp north). the field in between each magnet on the wheel is a strong south.
this is what I am thinking so far... anyone care to elaborate more on the why...
Patrick

[Stephen Brown]

@all,
Why I'm posting this because I want you to have every bit of information on what could be happening to magnetic fields in the machine. Watch what the wheel can do and then think about it. Also look at the Horseshoe
Magnet with open eyes.

http://www.johnbedini.net/john34/CoralCastle.wmv

John B

John:
Amazing video!
Was Ed using the iron above to shape the magnetic field so that his magneto would only be using North poles?
I know the story of Henry Ford, saying that he could run his Model T on just "Cow Magnets" and nothing else.
Do we have a north pole attraction motor here?
Would you give us your conclusions?
Or, at least ask another question to get us down the road.
Stephen

[Les_K]

Sidac

@ All,
You guys are smart here and should understand what I'm saying. The capacitor just charges to about 48 volts and the fet goes into negative breakdown and the energy is delivered to the secondary batteries as the coils fire. Come on guys the Sidac does this easy with an opto fet dc switch. no real power required.
John B

Not so smart as this guy....

Ignition coil using SIDAC triggers - YouTube

Les

[blackchisel97]

@all,
I thought that I would want you guys to watch this wmv that David Luke made for me. It was before I showed the big Ferris Wheel SG3 machine.Now some of you know that I made mention of the Coral Castle. It is not in any special order as I put it together.

I asked David to go there and take measurements for me of certain things, you will see. Well David basically takes over the place. Why I'm posting this because I want you to have every bit of information on what could be happening to magnetic fields in the machine. Watch what the wheel can do and then think about it. Also look at the Horseshoe
Magnet with open eyes.

http://www.johnbedini.net/john34/CoralCastle.wmv

John B

Thank you for sharing this video John Configuration of magnet stacks puzzles me for a long time. If they're not appear to be the super poles than it is possible that each stack contains mixed poles, instead of just one but... South seems to be well defined by tester unlike the opposite . What about the holes and (iron)wire connecting horseshoe? (I never noticed it before).

Vtech

[John_Bedini]

I made mention of the Coral Castle

@all,
I thought that I would want you guys to watch this wmv that David Luke made for me. It was before I showed the big Ferris Wheel SG3 machine.Now some of you know that I made mention of the Coral Castle. It is not in any special order as I put it together.

I asked David to go there and take measurements for me of certain things, you will see. Well David basically takes over the place. Why I'm posting this because I want you to have every bit of information on what could be happening to magnetic fields in the machine. Watch what the wheel can do and then think about it. Also look at the Horseshoe
Magnet with open eyes.

http://www.johnbedini.net/john34/CoralCastle.wmv

John B

[Ecancanvas]

Thanks Minoly

Good idea, just purchased #23
ED

[minoly]

Brent you say that your bobbin is very close to mine is that correct.

THE LARGE COIL,
Coil filled to almost 7/8 of the diameter with four wires Depending if your a sloppy winder like me. Holding 4 wires together as it does not make a difference.

I have chosen 2 # 15 wires at 4000 feet, now one wire is = to 12.736 ohms and two together = 6.386 Ohms.

Now, I have two # 18 wires at 4000 feet that = 25.54 Ohms from one wire. or two together at 12.77 Ohms.

Now I have two # 15 wires together at 6.386 Ohms
and two # 18 wires together at 12.77 ohms

If I use 1/X for the first number ( 6.386 ohms ) 1/X = 0.1565
if I take the second number (12.77 ohms) 1/X = 0.0783

Adding them together you get .23480 1/X = 4.258 Ohms for the big coil if all wires are tied together.

The big coil =, if you tie all wires together 4.2 OHMS

Outside coils #15 wire I have chosen 2000 feet = 6.368 Ohms each coil Can't Change that.

Now if I add all the coils together for a total I get this.
4.2, 1/x = .2348
3.1841/x = .3140

Adding them together is .5489 1/X = 1.82 Ohms Total all coils together.

So the numbers are,big coil is Equal to 6.368 Ohms. Or if you tie all wires together 4.2 Ohms.

Slave coils X 2 ( outer Coils) 3.184 Ohms 2000 Ft #15 wire.

This is as close as I can get without taking the machine apart according to Rick's windings. I will bet this works just fine on that machine.
When all coils are added together you will have 1.82 Ohms or very close to that.
Oh I forgot to say if your duty cycle is correct with the timing you will have about 1.5 amps input current with that switch.

Thanks for catching that Wrench76

John B

[minoly]

DVD 23 reveals more...

Patrick

[Ecancanvas]

Light bulb moment.