Announcement

Collapse
No announcement yet.

Peter Daysh Davey Water Heater Query

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Altair
    replied
    Resonance frequency

    Hi everyone,
    I'm new on this thread. I've read it entirely before posting.

    Early in this thread, Prof Savic wrote that the inside diameter of the beer can was very important because it had to be the quarter wave length of the frequency 1.1530479 MHz
    He said that the diameter of the can had to be 65mm.
    Doing the calculations, the wavelength of that frequency is 260.18mm.
    260.18 / 4 = 65.045
    Close enough.

    Recently, Monsieur M posted an excerpt from another web site that read:
    "But what you have to realize is that he left us a clue....Exploding water with 42712.2Hz...and Harmonic Math will definitely allow you to find the frequency to boil water"

    So I did a little calculation to see if there was a relation between the two frequencies. Let's apply the harmonic math to the frequency that explodes water:

    42712.2 x 9 = 384409.8 Hz
    384409.8 x 3 = 1.153229.4 MHz !
    Pretty close to the frequency Dr Savic mentionned isn't it ?

    I did a search for the frequency he mentions but no results come out, except the forum pages here, and at O.U.R.

    So, my first question to him would be:
    Did you arrive at that frequency by the same calculations I did ?

    Second question is:
    How did you determine the optimum length of the can ?
    Could we obtain the correct mechanical resonance of the can with thicker wall and longer length ? (As opposed to very thin wall and length limited by what is available on the shelves of beer stores)

    Thirdly, I would like to know if the gap of 2.52mm has been determined also by harmonic calculations, and if it is based on 60HZ or its harmonics.

    I would like to thank you sincerely Dr Savic, for bringing the information on this technology.
    But in order to succeed, we must absolutely understand the principle by which this system works. Otherwise, we will never be able to build efficient replicas. The whole point of participating on this forum, and doing experiments, is to bring new knowledge to the world, and stop the suppression of efficient technologies.
    This water heater is the most promising simple technology at the moment, and if we manage to get it known worldwide, this will probably trigger the start of the real disclosure of free energy technologies in the entire world.

    Sincerely yours.

    Leave a comment:


  • MonsieurM
    replied

    Some sort of Spider Web for neutrinos....

    Leave a comment:


  • evolvingape
    replied
    Food for thought ?

    Hi everyone,

    I have been busy all day and made a lot of progress in figuring out how to mechanically tune the components to the desired frequency. I was just about to start condensing and writing that up for you when I read Professor Savic's explanation on how he thinks the Sonic Boiler works... and bang... my mind was no longer interested in what it had been doing. So I decided to tell you where my thoughts went instead...

    Neutrinos were a big study area for me years ago and was part of what directed me to write this:

    Reader: EM SPHERE discussion

    At the time I believed the Neutrino field was static and massless and that the interaction was coming from the velocity of our greater mass passing through the Neutrino field. Anyway, I have not done much thinking at all on this subject for years, been too busy.

    But the last few hours I did begin thinking about it again and some things jumped out at me:

    ASP: How Fast Are You Moving When You Are Sitting Still?

    RASC Calgary Centre - How Fast Are We Moving?

    It is easy to think your sitting still right now, so big surprise when you find out just how fast your actually moving!

    So moving along:

    Neutrino - Wikipedia, the free encyclopediaSolar neutrino problem - Wikipedia, the free encyclopedia

    Neutrino oscillation - Wikipedia, the free encyclopedia

    Harmonic oscillator - Wikipedia, the free encyclopedia

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by Slovenia View Post
    Message from Mr. "C"

    December 23, 2011

    This is sonic boiler:
    Sonic the boiler resonance device is ostensibly a simple but very complex to understand as a Tesla coil.
    *Sonic boiler drains the energy of high-frequency quarter-wavelength from the system transmits high-frequency and low frequency in the system as heat.
    *The vacuum is full of neutrinos.
    Sonic boiler draws energy neutrinos (Tesliona) high frequency.
    Neutrinos originate from our sun and hit the crystal lattice of metal and break out of the last electron orbital.
    *Electron for a moment lost in kavntnom field (leave this dimension) and cried when he returns to collapse with him seven times more energy than he received.
    *It is this energy that captures the resonance.
    Diameter electrodes sonic boiler is a quarter wavelength, which he catches a current frequency of 50 Hz is only its excitation frequency.
    Neutrinos are like sound waves moving particle pushes the particle.
    And because the sonic Boiler tunes as playing a musical instrument at 50 Hz.
    Sonic boiler a musical instrument not only heater.
    Because God is an artist not only a scientist.

    The higher the frequency of excitation current and higher voltage streuje boiler and pressure, the greater the COP sonic boiler.
    This is why Tesla did with high voltages and high frequencies so that the more free energy catching environment.
    Tesla says, "Each generation of electricity and transmission resonances without the dead weight loss."
    Energy is free and therefore should give people free to use.
    Declare this my explanation on energetic forum.
    I wish all a Happy New *2012 and Christmas holidays
    prof.Savić, Serbia.

    Amen, Professor

    Merry Christmas , I ll have a little prayer for you and your family ...may they protect you

    Leave a comment:


  • RAMSET
    replied
    I am Of course Clueless

    Professor Savic,
    It would seem that your explanation on where the extra energy is Coming from
    Could also be applied to other Media and devices?

    I am very excited to see How this progresses,we most certainly have an anomoly of some type going on Here?

    Have a wonderful Holiday ,We are all praying for you and your Family ![especially Branislav]

    With all respect

    Chet

    Leave a comment:


  • Slovenia
    replied
    Message from Mr. "C"

    Message from Mr. "C"

    December 23, 2011

    This is sonic boiler:
    Sonic the boiler resonance device is ostensibly a simple but very complex to understand as a Tesla coil.
    *Sonic boiler drains the energy of high-frequency quarter-wavelength from the system transmits high-frequency and low frequency in the system as heat.
    *The vacuum is full of neutrinos.
    Sonic boiler draws energy neutrinos (Tesliona) high frequency.
    Neutrinos originate from our sun and hit the crystal lattice of metal and break out of the last electron orbital.
    *Electron for a moment lost in kavntnom field (leave this dimension) and cried when he returns to collapse with him seven times more energy than he received.
    *It is this energy that captures the resonance.
    Diameter electrodes sonic boiler is a quarter wavelength, which he catches a current frequency of 50 Hz is only its excitation frequency.
    Neutrinos are like sound waves moving particle pushes the particle.
    And because the sonic Boiler tunes as playing a musical instrument at 50 Hz.
    Sonic boiler a musical instrument not only heater.
    Because God is an artist not only a scientist.
    The higher the frequency of excitation current and higher voltage streuje boiler and pressure, the greater the COP sonic boiler.
    This is why Tesla did with high voltages and high frequencies so that the more free energy catching environment.
    Tesla says, "Each generation of electricity and transmission resonances without the dead weight loss."
    Energy is free and therefore should give people free to use.
    Declare this my explanation on energetic forum.
    I wish all a Happy New *2012 and Christmas holidays
    prof.Savić, Serbia.

    Leave a comment:


  • Slovenia
    replied
    Sharing

    Hi Rob,
    Thanks for getting involved in our project. We appreciate the help.
    Best Regards,
    Slovenia

    Originally posted by evolvingape View Post
    Here is an explanation I found useful:



    I do not fully understand all this yet, but I am getting there...

    Night all

    Rob

    Leave a comment:


  • evolvingape
    replied
    Getting there...

    Here is an explanation I found useful:



    I do not fully understand all this yet, but I am getting there...

    Night all

    Rob

    Leave a comment:


  • evolvingape
    replied
    Ah ok, my error!

    I understand now...

    Household Electric Circuits

    Chet's use of "hot wire" threw me as did only two connections on the diagram. I am not great with AC, DC more my thing.

    This is confusing stuff for an electronic newbie like me.

    I will have to sleep on it, I can feel the tingling, but the picture is not quite clear yet...

    Thankyou all for your input,

    Rob

    Leave a comment:


  • Slovenia
    replied
    Neutral Plate Clarification

    Hi Rob,
    No, we were actually told to connect the neutral plate to neutral.
    Thanks for your help!!!
    Best Regards,
    Slovenia

    Originally posted by evolvingape View Post
    Hi Cherryman,

    Was not a critiscism of your drawings, which are great, I was just pointing out that it did not look right to me.

    Slovenia's explanation now makes sense to me...

    The double walled IKEA bottle with the open end has both walls positive, the outer container is the negative ground, and the neutral plate should have no connections, but just oscillate with the frequency, like a speaker diaphragm.

    Peace

    Rob

    Leave a comment:


  • Slovenia
    replied
    Water Level for IKEA Boiler

    Water Level for IKEA Boiler

    I forgot to mention the water level for the IKEA boiler. The IKEA boiler is completely submerged in the water tank. The top of the IKEA should be approximately an inch below the water surface in the tank. This is very important indeed!! Sorry I forgot to mention it but I forgot to put this information in my notes and therefore I forgot about it entirely.

    Leave a comment:


  • evolvingape
    replied
    Hi Cherryman,

    Was not a critiscism of your drawings, which are great, I was just pointing out that it did not look right to me.

    Slovenia's explanation now makes sense to me...

    The double walled IKEA bottle with the open end has both walls positive, the outer container is the negative ground, and the neutral plate should have no connections, but just oscillate with the frequency, like a speaker diaphragm.

    Peace

    Rob

    Leave a comment:


  • Slovenia
    replied
    Be Careful!!

    Be Careful!!

    These are Professor Savic's drawings.

    Originally posted by RAMSET View Post
    Only Teasin S..............
    Oh.... we gonna have some fun over here!!

    Chet
    Last edited by Slovenia; 12-23-2011, 11:12 AM. Reason: Reworded something

    Leave a comment:


  • RAMSET
    replied
    I like C,Mans Drawings Better !:}

    Only Teasin S..............
    Oh.... we gonna have some fun over here!!

    Chet

    Leave a comment:


  • Slovenia
    replied
    Original Serbian Boiler Diagrams (Provided Again for New Guys & Gals)

    Original Horizontal Serbian Boiler


    Later Vertical Serbian Boiler W/Plate instead of Neutral Ring

    Leave a comment:

Working...
X