Peter Daysh Davey Water Heater Query

[Slovenia]

Secret

Hi Rob,

Very eager to hear about the secret of 3, 6, & 9. That sounds incredible and you have my undivided attention.

Best Regards,
Slovenia

Hi everyone,

I believe I cracked the secret of 3, 6, 9, a few years back... some of you might recognise this

I will not give you my explanation just yet, I want you to think about it for yourself and see if you can figure out what is going on...

Merry Christmas 2011

Rob

[MonsieurM]

Touche, Sir...

I have never read any of Walter Russell, so little time, so much to do...

Most of my work has been done in isolation...

So imagine my surprise when lately I keep coming across other's work that I instantly recognise... serendipity manifesting...

My next step is a flying saucer, electro gravitics is where I am going... although that seems a forlorn hope when you are unemployed, yet again, and cannot even make the rent...

Sincerely ask, and the universe will provide...

Or so they say...

Rob

here is a thread that might get you on the fast track... http://www.energeticforum.com/renewa...magnetism.html ....discussions taking place cover a wide range of subjects...mostly food for thought

we are all here to learn from one another

[evolvingape]

Would you believe it...

Touche, Sir...

I have never read any of Walter Russell, so little time, so much to do...

Most of my work has been done in isolation...

So imagine my surprise when lately I keep coming across other's work that I instantly recognise... serendipity manifesting...

My next step is a flying saucer, electro gravitics is where I am going... although that seems a forlorn hope when you are unemployed, yet again, and cannot even make the rent...

Sincerely ask, and the universe will provide...

Or so they say...

Rob

[MonsieurM]

Looks like we are on the same page

have you ventured reading:

the work of Walter Russell http://www.energeticforum.com/renewa...-his-work.html

Science Article: Dr Milo Wolff: The Wave Structure of Matter (Electron): Origin of the laws of Nature


if not i think it will resonate with your theory

[evolvingape]

Here is the link:

Reader: EM SPHERE discussion

Was in post #1417, you not reading what I work to provide for you ? naughty boy!

Although I cannot really back up my position... I have barely read anything in this thread... sometimes it leads me down the garden path so to speak...

And you will not offend me, I am just playing with you, teasing, let's have some fun with all this...

Rob

P.S. a few brewskis for the good... so I apologise in advance if I offend you

Rob

[MonsieurM]

Hi MonsieurM,

Your observation is correct, in 2 dimensions, and your correction is correct in 3 Dimensions...

I am very pleased your getting this

Go back and review EM SPHERE... then tell me I have only discovered 1 facet of 3, 6, 9...



Now we are having fun... are we not ?

Rob

P.S. The waveform frequency in the bottom right is just one interpretation to show positive and negative amplitude changes in 1/4 wavelength... superimpose 3, 6, 9, phase on the same diagram and then what do you have ?

Rob

I did not mean to offend you....I should have added in my opinion...but you know , you maybe correct...


EM sphere do you happen to have a link...always looking to learn something new

[PhysicsProf]

Thought I would post an update from me.... Still no luck tuning beer cans..I cant find a 200 MM can anyplace in southern indiana/Northern Kentucky. And am having zero luck trying to get any other size to tune to 60 Hz.
Professor Savic, your family and son are in my familys prayers. I sincerely hope all is well.
Altair, you have asked some good questions! Those are ones I have been asking myself the past week. great work all!! Was admiring all of the pipes on the pipe organ at church last week.I am going to start in a direction of custom cylinder......any ideas?? I have machine tools..Was wanting to get my tuning correct before I put in water..there is no doubt in my mind that this works well!! Thanks again to all that contributes, and Thank you Prof. Savic.
Merry Christmas to all!!!
Jason

Jason, why don't you try the IKEA flask approach pioneered by DaemonBart, since you can't find the right sized beer can? I attach a photo posted a while back by Chet (Ramset) so you can get the correct one.

Wishing all a very MERRY CHRISTMAS -- and lets make the New Year happier by pursuing our Freedom Energy adventure!

[evolvingape]

Nice observation in 2D

Hi MonsieurM,

Your observation is correct, in 2 dimensions, and your correction is correct in 3 Dimensions...

I am very pleased your getting this

Go back and review EM SPHERE... then tell me I have only discovered 1 facet of 3, 6, 9...



Now we are having fun... are we not ?

Rob

P.S. The waveform frequency in the bottom right is just one interpretation to show positive and negative amplitude changes in 1/4 wavelength... superimpose 3, 6, 9, phase on the same diagram and then what do you have ?

Rob

[MonsieurM]

Hi everyone,

I believe I cracked the secret of 3, 6, 9, a few years back... some of you might recognise this

I will not give you my explanation just yet, I want you to think about it for yourself and see if you can figure out what is going on...

Merry Christmas 2011

Rob

nice finding evolvingape...




ps: A fractal exist on multiple dimensions...so to be more precise you have discovered one facet of 369

a fractal construct has an 'efficient function', it has a fractal ergonomy to them, they function on multiple levels and in multiple dimensions:

here is a 3D version of your finding



vortex like, isn't it

[evolvingape]

The Secret of 3, 6, 9... according to me

Hi everyone,

I believe I cracked the secret of 3, 6, 9, a few years back... some of you might recognise this

I will not give you my explanation just yet, I want you to think about it for yourself and see if you can figure out what is going on...

Merry Christmas 2011

Rob

[MonsieurM]

a fractal construct has an 'efficient function', it has a fractal ergonomy to them, they function on multiple levels and in multiple dimensions:

If you understood the above statement , you'll understand the following

just on a side note: the double spiral water closely resembles the double mobius coil mentioned earlier

Step 1

2 wires of six feet each to be made into 2 mobius wires (you end up with 2 mobius wires that are 1/4 the length of 6 feet )coiled at 45 degrees (see how to build a mobius coil Mobius Coil Tutorial )



Step 2

Coil the first Mobius Wire as previously indicated in a Caduceus Manner (three times / three crossing maybe )

Step 3

Coil the Second Mobius wire 180 degrees opposite of the first Coil

Step 4:

Connect as previously indicated http://www.energeticforum.com/renewa...-query-43.html start with post #1271



enjoy the experimentation

COHERENCE AT ANY LEVEL IS COHERENCE AT ALL LEVELS.
An orderly arrangement between wave lengths establishes a connection between frequencies and fields. But for this connection to last, it must resonate to all frequencies and fields. This can only be accomplished through the resonate structure of golden mean pathways. a harmonic cascade effect

[MonsieurM]

I was wondering where the 6 went, in this system...60 hz...harmonic math 60 is 6




42712.2 x 9 = 384409.8 Hz
384409.8 x 3 = 1.153229.4 MHz



COHERENCE AT ANY LEVEL IS COHERENCE AT ALL LEVELS.
An orderly arrangement between wave lengths establishes a connection between frequencies and fields. But for this connection to last, it must resonate to all frequencies and fields. This can only be accomplished through the resonate structure of golden mean pathways. a harmonic cascade effect

I was just reviewing some numbers posted in this thread and started with

an info posted by Prof Savic : http://www.energeticforum.com/renewa...r-query-2.html

1.725mm electrode distance is 60 Hz. 300 Hz and the negative electrode has to play the sonic boil

Reduction is one of the method used in Harmonic Math (also called Rodin Math )

1.725 = 1 + 7 + 2 + 5 = 15 = 6
60 Hz = 6
300 Hz = 3


-------------------

I think 2.1mm was the space between the can and the ring so the ring should be 70.2mm

2.1 mm = 3
70.2 mm = 9

I hope you see the Pattern...just find the 3 6 and 9

last but not least:

Early in this thread, Prof Savic wrote that the inside diameter of the beer can was very important because it had to be the quarter wave length of the frequency 1.1530479 MHz

1.1530479 MHz = 1 + 1 + 5 +3 + 4 + 7 + 9 = 30 = 3

I think you'll Appreciate this one:

Sonic boiler are trying to make a 110 Volt 60 Hertz has a COP = 6.93

What you supply area of the apartment, you calculate the width and thickness of the electrode, zero reba to resonate at 300 Hz. Fuse will die if you are using electricity for over 15 Amperes.

300Hz = 3
15 Amp = 6

a fractal construct has an 'efficient function', it has a fractal ergonomy to them, they function on multiple levels and in multiple dimensions:

[Slovenia]

No Success

Hi Jason,

Nice to hear from you. In lieu of 200mm aluminium cans, why don't you try some very thin stainless shim stock rolled into a tube the proper length. You could rivet it together with stainless rivets. You could custom make it to whatever length or width you wanted.
It's fairly inexpensive too.

The aluminium can will get holes in it quickly if not tuned to the appropriate frequency. Daemonbart had his getting holes within two hours.

Best Regards,
Slovenia

Thought I would post an update from me.... Still no luck tuning beer cans..I cant find a 200 MM can anyplace in southern indiana/Northern Kentucky. And am having zero luck trying to get any other size to tune to 60 Hz.
Professor Savic, your family and son are in my familys prayers. I sincerely hope all is well.
Altair, you have asked some good questions! Those are ones I have been asking myself the past week. great work all!! Was admiring all of the pipes on the pipe organ at church last week.I am going to start in a direction of custom cylinder......any ideas?? I have machine tools..Was wanting to get my tuning correct before I put in water..there is no doubt in my mind that this works well!! Thanks again to all that contributes, and Thank you Prof. Savic.
Merry Christmas to all!!!
Jason

[Slovenia]

Professor Savic (Not Energetic Member)

Professor Savic is not a member of Energetic Forum. I forgot to mention that. So, he's not in a position to answer your posts directly.

I would really like to have a reply from Dr Savic on the questions I asked in my earlier post. (Slovenia ?)

Altair

[evolvingape]

Good Vibrations...

Hi everyone,

Quick update on where I am with this:

50 Hz Nerve Tuning Fork

Angelic Gate :: Tuning Forks

Scroll down the page until you see it. Note the weights that were used to set the frequency at the factory. The knurled knobs suggest it is tightened in position and is therefore moveable. Scribe an accurate mark for both weights on the fork, after you have tested it's frequency, to see if the scribe marks change the cycles per second. Alternatively use a permanent marker. You can now set it to 50 or 60 Hz at leisure

Measuring the Frequency of Sound

The Frequency of Sound

There is an easier way...

Tuning fork frequency measurement - YouTube

And there is an even easier way...

Freeware: How Frequency Analyzer Works

This is a freeware Frequency Analyzer that uses the sound card on your computer and a calibrated desktop microphone (or any microphone). You now have the ability to precisely measure and test your parts for frequency. Use the tuning fork to calibrate accuracy

The coil pickup in the microphone replaces the coil in the video above, and the software and computer replace the equipment in the video.

Here is a more powerful tool...

ARTA Home

I especially like the part:

The STEPS program enables the measurement of the frequency response with a high dynamic range and a high noise immunity. Simultaneously with a frequency response measurement the STEPS estimates levels of 2nd, 3rd, 4th, 5th and higher order harmonic distortions.

And calculate your harmonics here:

Electrical Harmonics Calculator

Now let's have a look at how the 50 or 60 Hz frequency coming out your mains electricity socket is generated and controlled...

We start by learning about the alternator which converts rotary moment into electrical potential difference:

Alternator - Wikipedia, the free encyclopedia

Now let's look at a particular permanent magnet alternator:

Permanent Magnet Alternator Wind Blue Low Wind

I want you to note here that an alternator has a particular frequency dependent on the speed it is spun at and the number of poles it has. The voltage and current are however in a fixed ratio.

Now let's learn about the AC alternator a bit more and the waveforms generated:

AC-Frequency

and a bit more:

COMBINED

before we eavesdrop on some electrical power generation engineers telling you all their secrets...

Steam turbine generator speed control - clarificationHousehold Electric Circuits

and then we find out how new the clarification of what it actually does is...

Electrical Contractor: Neutral or Not?

and then we learn about it a bit more and we keep going until we got it... eureka!

http://www.apcdistributors.com/white-papers/Power/WP-21%20Neutral%20Wire%20Facts%20and%20Mythology.pdf

(My current method to imagine how this works is consider the hot the same as a red positive in a dc circuit, and the neutral the same as the black. Instead of the electricity only going one way, it goes forward and back at a rate set by it's frequency. In addition the neutral (black) is also connected to a distribution manifold of neutrals to balance over volt condition and prevent surface charge building up, the neutral (black) is also connected to earth ground. Please enhance or correct this understanding as appropriate).

Here is some light reading on frequency...

Nexus - The Schumann Resonances and Human Psychobiology

So, now let's talk about practical application of all that knowledge...

Steel Pipe Flanges | Stainless Steel Fittings - Pipes

The people who know me will instantly recognise this page

and cheap zinc collets... amongst other things

Advanced search :: Search results - Technobots - Electronic & Mechanical Components

and highest quality semi split stainless steel collars...

Drill Bushes, Jig Bushes, Dowel Pins and other precision engineered parts by Boneham & Turner Ltd - Precision Engineers

I will now be able to take the pipe I acquired to build turbine nozzles for the canceled HELT project, and cut them to length, measure the frequency using my computer and see the waveform, as well as measuring for higher order harmonics

So after Christmas I will be able to tell you all what length to cut the pipe to, for a particular schedule of pipe, to achieve your desired frequency, in the pipe sizes I have. I should also be able to identify where the nodes (does not vibrate) and anti nodes (vibrates) are and mark them approximately defining their wavelength.

This will be important information but gets even better when you know a secret...

If you select two sizes of schedule pipe that have an OD and an ID (bore) that leave a gap between them of a couple of mm (up to you) you will be able to roll an appropriate o-ring down between the tubes by sliding one tube inside the other. Once you have the first one in, add a second and roll that down as well and you will find that the inner tube is perfectly centered, stiff and hard to move, but held on rubber bushes (o-rings) and the two tubes will oscillate You just have to keep trying until you get both of them positioned in their own node, and then test the frequency to make sure it is not being dampened

This works like a dream...

On a final note I will leave you with something to ponder...

If you followed my gasifier stuff then you will know about primary and secondary shaft sleeving so if I say to you that tomorrow (if the missus let's me) I am going to work on a BSP IKEA... you got a head start on the next stage

Rob