Muller generator replication by Romerouk

[Bruce_TPU]

Bruce

Call me a troll or whatever you like but I am kindly suggesting you take a step back and look at this honestly. I have to agree with syncro here and I don't see what you are getting excited about in your litz arrangement because all you are doing is splitting up the 'magnetic load' and then later recombining it in series or parallel.

Are you serious? A whacking great bench grinder with loads of torque powered by a 220v 10amp wall outlet and you are thrilled that you can glean 11 volts and 50 - 100ma back from that??? You are a million miles from break even let alone overunity.

Everything in the Universe obeys simple laws of physics and granted there are some laws that arent in the mainstream eye yet, let us look for a moment at what YOU are focussing on which is the lowering of resistance in wires and hopefully if you do enough of that you are supposedly going to achieve OU???!!

Ask yourself this then. IF you made the perfect rollerskate which has zero resistance (the bearing) and forgetting about the resistance of air for a moment let us suppose that once you spin that wheel, it keeps spinning infinitum. Does this mean that if you put that rollerskate on a upward inclined slope it will propel itself up the hill??? Of course not! It wont even speed up on a flat surface because the losses are everywhere outside the environment of the bearing.

Oh but I forget. You think that smashing together 3 frequencies in a magic arrangement will herald forth the angels song and aetheric OU itself. There is no magic frequency or frequencies and what you are seeking to do only is a fancy way of killing the dipole through an overly complicted circuit when you would have been better off hooking the light bulb to the battery in the first place.

I also find it amusing that all the circuits that you propose a-la- steven mark look nothing like his device. You have masses of tubes and circuit boards that couldnt possibly fit in a small device let alone Grandma's suitcase!! Don't LISTEN to what SM SAID because he was a deceitful SOB who gave snippets of truth which added to the illusion that he was telling the overall truth. HE NEVER WAS.

You might think I am saying that the TPU is rubbish. This is not what I am saying at all. Honestly, I do not know whether it was real or not. I only deal with facts and dont believe carte blanche what people tell me. I know OU exists. However SM and the TPU is an unknown because all you have is a bunch of blurry videos and bulldust statements from a man that was a PROVEN LIAR and fraudulent human being. These things are FACT. He took a lot of peoples money in different lands and would always make lame excuses when authorities wanted to indepedently test the device. Yet you chose to believe everything the man says knowing this??? Are you gullible?

I have read at length the rantings of SM who was a narcisitic person and whilst there is much fact laced through his dialogue, this is what makes it sound so semi quasi-scientific and credible. In SM, I see a man that was if nothing else a good salesman and like all great salesman, they have no issues bending the truth and using 'sleight of hand' to avoid the truth. Ever talked to a car salesman and try to nail them on a tricky issue?? Same thing. SM talked AROUND EVERYTHING except how the device works. None of this makes any sense either, because one of the theories has always been that he was either paid off or threatened to keep quiet. One thing is for sure, if either of those things were true, SM wouldnt have talked at all not even to give you the slightest hint.

Use common sense on this.

Anyhoo...I wish you well in ur testing.

Actually, once again, you are WRONG.... and mis state the facts.

Steven's initial experimentation included a table full of tubes, when he made the initial discovery, and what is seen in the ALL of the video's is MANY years removed. But you are not "privy" to the information I have, but some, who matter, are.

And actually, our 15" TPU, looks "exactly" at Steven's did, and there are two possible ways to wind it and we are winding it both ways. You see, we actually "build" things to experiment....hehehe

Ours WILL be filled with tubes and electronics because Steven Mark said to "start with tubes", but why would I or anyone else expect the likes of you to actually "listen", as that is not your strong point is it?

The electronics will be widdled down when we have a working device. And as to our three hetordyning frequencies, those too were given by the inventor, and I shared them with the world, so you can flap your oil investing jaws all that you want. If you don't like the route I take with my experiments, BUILD YOUR OWN TPU! Oh, wait, I forgot, YOU DON"T BUILD ANYTHING. Sorry, I forgot.

Next, the "bench grinder" was simply my means (at that time) to establish my rotating fields and to test many, MANY coils. I later moved on to a dc motor, and to this day, use a DC motor of 6volts at 220 ma's. But still testing coils. But you don't "comprehend" when you read, so why should I expect you to understand now? Retorical question, this doesn't require an answer.. lol

Your rantings about Steven Mark, derogotory and inflammatory, about a genius mind you have never met, quite expected. Oh, how ARE your oil investments doing, by the way? Oil is UP, you are thrilled.

Sadly, those here don't know of what character you are, (BUT, thanks for not dissappointing, as they are quickly seeing!) but we do. So sad... really. Oh, by the way, all that YOU have is a bunch of blurry videos, and that is all that YOU and your like, deserve...

And "call you a troll", well, everyone just calls it as we see it. You NEED to go correct yourself. Take a reading course on "how to comprehend what others write".

Just like you are TOTALLY DISTRACTING THIS THREAD for their Muller Dynamo Replication. If I were the moderator here, I would have already deleted your posts and put you on "read mode" only. Oh btw, good luck with your testing.... oh, wait, you don't test anything.... sorry

[Bruce_TPU]

Bruce,

You maintained that your coil of 200 strands was capable of producing two hundred times the power. I can bring the quotes over from your TPU thread. You care to explain that claim? Here's one of your claims:

"Hi Stefan,

Anyone using this technique as part of an overunity prize request, I ask for HALF the OU prize, as I am now open sourcing this".

Hi PC hero,

This "quote" is accurate and I still stand by it...lol

[Slider2732]

It shouts transformer to me. Is this where the DC/DC comes into the picture ?
I'm largely ignorant on the subtleties and calculations. but if you need at least 7 watts and you have an excess of that magnitude of voltage, would such a conversion with the correct windings leave you really so short on looper requirement ?
I'd like to know, just for knowledge and apologize for lack of prior knowledge.

[erfinder]

If I may make a suggestion....switch the load to a bank of incandescent lamps (6x 40watts), and pulse the cap out to the lamp bank...

Regards

[toranarod]

[synchro]

Bruce's OU Claims.

Bruce,

You began to make bogus and outragous overunity claims useing your super advanced two wire Ohm's Law math, and you never retracted any of those hyper delusional claims. All you've continued to do is maintain that I lack the comprehension to fully understand your futuristic physics. I deeply resent that.

Lidmotor recently observed that he found no advantage to useing multi strand Litz over single strand in his Romero coils, a position I took from the outset.

Who are you to try and bully me off this thread with those wild and preposterous over unity claims of yours? I want you to admit you've been wrong, and stop persecuting and demeaning me for taking the time to correct you.

[synchro]

Electric Goose.

Bruce

Call me a troll or whatever you like but I am kindly suggesting you take a step back and look at this honestly. I have to agree with syncro here and I don't see what you are getting excited about in your litz arrangement because all you are doing is splitting up the 'magnetic load' and then later recombining it in series or parallel.

Are you serious? A whacking great bench grinder with loads of torque powered by a 220v 10amp wall outlet and you are thrilled that you can glean 11 volts and 50 - 100ma back from that??? You are a million miles from break even let alone overunity.

Everything in the Universe obeys simple laws of physics and granted there are some laws that arent in the mainstream eye yet, let us look for a moment at what YOU are focussing on which is the lowering of resistance in wires and hopefully if you do enough of that you are supposedly going to achieve OU???!!

Ask yourself this then. IF you made the perfect rollerskate which has zero resistance (the bearing) and forgetting about the resistance of air for a moment let us suppose that once you spin that wheel, it keeps spinning infinitum. Does this mean that if you put that rollerskate on a upward inclined slope it will propel itself up the hill??? Of course not! It wont even speed up on a flat surface because the losses are everywhere outside the environment of the bearing.

Oh but I forget. You think that smashing together 3 frequencies in a magic arrangement will herald forth the angels song and aetheric OU itself. There is no magic frequency or frequencies and what you are seeking to do only is a fancy way of killing the dipole through an overly complicted circuit when you would have been better off hooking the light bulb to the battery in the first place.

I also find it amusing that all the circuits that you propose a-la- steven mark look nothing like his device. You have masses of tubes and circuit boards that couldnt possibly fit in a small device let alone Grandma's suitcase!! Don't LISTEN to what SM SAID because he was a deceitful SOB who gave snippets of truth which added to the illusion that he was telling the overall truth. HE NEVER WAS.

You might think I am saying that the TPU is rubbish. This is not what I am saying at all. Honestly, I do not know whether it was real or not. I only deal with facts and dont believe carte blanche what people tell me. I know OU exists. However SM and the TPU is an unknown because all you have is a bunch of blurry videos and bulldust statements from a man that was a PROVEN LIAR and fraudulent human being. These things are FACT. He took a lot of peoples money in different lands and would always make lame excuses when authorities wanted to indepedently test the device. Yet you chose to believe everything the man says knowing this??? Are you gullible?

I have read at length the rantings of SM who was a narcisitic person and whilst there is much fact laced through his dialogue, this is what makes it sound so semi quasi-scientific and credible. In SM, I see a man that was if nothing else a good salesman and like all great salesman, they have no issues bending the truth and using 'sleight of hand' to avoid the truth. Ever talked to a car salesman and try to nail them on a tricky issue?? Same thing. SM talked AROUND EVERYTHING except how the device works. None of this makes any sense either, because one of the theories has always been that he was either paid off or threatened to keep quiet. One thing is for sure, if either of those things were true, SM wouldnt have talked at all not even to give you the slightest hint.

Use common sense on this.

Anyhoo...I wish you well in ur testing.

[synchro]

Bruce.

Bruce,

You maintained that your coil of 200 strands was capable of producing two hundred times the power. I can bring the quotes over from your TPU thread. You care to explain that claim? Here's one of your claims:

"Hi Stefan,

Anyone using this technique as part of an overunity prize request, I ask for HALF the OU prize, as I am now open sourcing this".

[quantumuppercut]

YouTube - ‪RG Group Pulse Motor Acceleration Test (Part 3)‬‏

Very interesting. When shorted without the capacitor in parallel, the RPM dropped (sounds like 3400 RPM from 4000). When connecting the capacitor in parallel, the RPM dropped... double time (2191 RPM). Seems like LENZ kicked in even worse with capacitance at resonance. Could this be why RUK dynamo draw so much watts even when unloaded.

Thank you Jdo and group.

[Slider2732]

The fix worked
I still find it completely hilarious how a lightbulb can be used as a motor throttle control the world's energy crisis may yet be solved by cigarette packet foil and a Snickers bar.
Yer right though, it might not be a Bedini XLS, but indeed an SSG,

[minoly]

Hey Patrick
your video shows up as private when the link is clicked. not sure if that is on purpose, but wanted to let you know in case it wasn't
N8

Oops :-) try it now
YouTube - ‪CFL effects speed of Bedini SSG‬‏

[Slider2732]

@Penno - Yep, got it to light while stationary and then when spinning. That was when I quickly grabbed all the glues I could find and no doubt moved it a hair out of place again.
Another interesting thing, is that small transistors, like the D667 will get hot pretty quick if they are not in resonance. When correct, they can run and run.

@minoly - same here, just the 'Private' screen. I have no doubt whatsoever that you are correct. There's a lot of respect for your work and Bolt's of course.

[Neight]

Thought I already said it :-) LOL
Oh well sometimes it does require a visual:

http://www.youtube.com/watch?v=p2-ak7u9amY

Hey Patrick
your video shows up as private when the link is clicked. not sure if that is on purpose, but wanted to let you know in case it wasn't
N8

[minoly]

@Zooty..it was the failing to build a Bedini SSG in the first case that got me really into all this. Weird really. I'm very sure that some time down the road a chap will demo something and my wow comments will result in him saying 'oh its just a standard Bedini XLS, everyones made one' !

Thought I already said it :-) LOL
Oh well sometimes it does require a visual:

http://www.youtube.com/watch?v=p2-ak7u9amY

[penno64]

Hey Slider,

Have you been able to replicate the first coil setup and get the neon to
light again without rotor movement ?

This, I feel, is a most important little experiment. It shows signs of
amplification at a stand still - hence I mentioned magnacoaster.

Penno