Imhotep's Radiant Oscillator Video

[Aromaz]

No 2N2222 No working ..... yet

@bodkins, am I right thinking the circuit will work without 2n2222, just ground to first 2n3055?

I tried removing the 2N2222 - all dead, even with earth or life on 1st 3055. Nothing. I also tried to replace it with all transistors, IRF's and Mosfets I have on site - some 58 different types - not deal. Seems there is something hiding in the 2N2222 which is the basis of this whole setup. See earlier post from 'ashtweth' re NDR. There might be a big thing in that concept.

Till later, another through night coming up. Should get better bed in my lab than the current couch.

[Aromaz]

A Magical wonder

Very interesting indeed Aromaz. Maybe you could try a rotating coil to see what happens? There is a huge secret in motion of the coils and transfomers(ie variocoupleers) I believe. Aehter will be attracted to a vortex motion.

I wish I had access to all those wonderful things. Here, there is no possibility of even finding such thing, only if building it oneself. I do not know exactly how this will work and how to put together.

Already I am daring onto new grounds for a novice like me: Building my own capacitors and now working on a 'gasious filter' as it was described by T Moray and Tesla.

@Lidmotor:
I removed two of the 2N3055's (Remaining with 1x2222 and 1x 3055) and system worked, but sometimes needed a kick-start with earth wire (or finger touch) as per your video. Probably why I would never have picked this up on my much older circuits - or why nobody got it from a Darlington pair as yet.

So I put one 2N3055 back in same old position - BUT and this is nice - I taped the emmiter of to second coil + and that coil directly from battery negative - complete new set of lights on HV.

Then I added the third 2N3055 and tapped that emmiter of to a third coil - and used up all the spare lights in factory. Have now 15 lights on - same illumination as 3 to 6 units before - all still running from one 12V battery, 1x 2N2222 and then each branch of to its own 2N3055 transistor, coil and light sets - all connected to negative of battery. Playing aorund with earth gives someplaces a brighter and some places a dimmer light. Strange this this ground.

Best of all:

1-Battery
> Amp meter on positive
> 2N2222
>1st 3N3055 (Master) > 2N3055 > Hitachi coil > 6x CFL tubes
> 2N3055 > noName coil > 6x CFL tubes
> 2N3055 > NoName coil > 1x CFL tube
1x 18W Phillips F-Tube
1x 32W Phillips F-Tube

AND - All of these are fairly bright
at drawing of only 0.62 mA !!!!

Now I am off to big supermarket to make them happy. Gone off their shelf will be another 20 plus Phillips 23W CFL lights and some more fluorecent tubes. At least I am going to end up with a huge stock of CFL controlers.

Tonight I am going to push 1x 12V battery and 1x 2N2222 with 4x 2n3055 transistors each feeding one junk coil to the absoluut limit with as many lights as they can take till failure OR lights goes very dim.

Next (? Tomorrow ? ) I want to open two coils and see how it will be possible to join them in series for more power.

I feel like a light myself now.

[Inquorate]

Wow

Been busy with life stuff for a few days, and come back to find everyone WAY ahead..

Great work Aromaz.

@bodkins, am I right thinking the circuit will work without 2n2222, just ground to first 2n3055?

I was going to post the following.. Guess I still will.. Great way to generate signal frequencies. I'm inclined to think along lines of Aromaz now, that letting circuit self oscillate is good way forward, but having done heaps of research and gotten all the parts, I might build my little signal generator anyway - should generate compression waves only meters long. That'd make wireless receiving coils the 1/4 of wavelength tesla stipulated would give high gains in power.

This stuff just blows your mind eh..

/// Here's the schematic I'm going to use as a signal generator, except adding a 12 way switch to select different coils, uh to mh. Also, another 12 way switch to select sets of caps, 1-10p variable, 10p-80p variable, 60-160p variable, 1n, 10n, 100n, etc. Also, going to add 1m ohm pot somewhere, either side if inductor, methinks.

Image:NPN Colpitts oscillator collector coil.png - Wikipedia, the free encyclopedia

And here's link to pic using Tranny in colpitts oscillator that has earth input to base..

Colpitts oscillator - Wikipedia, the free encyclopedia

- it's fig 1

[ren]

I think Ash's post brought up an interesting point before. While the majority of these circuits are running fairly efficiently it is important to note the light output. I have a toroidal transformer here that I am pulsing with a PWM and mosfet and I have finally got a bulb to light to full brightness or more. By full, I mean if you stare at it for longer than a second your vision goes blurry . There is a dramatic difference between "lit" and "illuminating" and it is important to note. I can run my lights at low amp draw, but only at decreased incadescance as well. Coincidently the 20watt globe I have can be lit to 99% brightness or more for 1.5 amps @ 12v. One interesting point is the toroidal transformers secondary is not directly connected to the primaries.

Aromaz I am interested to see where your circuit goes, there are multiple ways one can trigger an oscillation for peanuts. IF you havent yet, look further back in this thread at the Bedini self oscillator we experimented with, I believe that in some ways it is similar in principle to the one you have, to some degree. Didnt Lidmotor connect the transistors base (2n2222) to the positive of the source?

By the way, search for a demo or freeware version of "stoik video converter" if you have a pc. I had no troubles with it converting for the Tube.

Very interesting indeed Aromaz. Maybe you could try a rotating coil to see what happens? There is a huge secret in motion of the coils and transfomers(ie variocoupleers) I believe. Aehter will be attracted to a vortex motion.

[gnino]

another replica

with 1 2n2222a and 2 2n30555

grazie aroma

[Aromaz]

Frequency testing

@ Lidmotor and Bodkins;

If you do not mind and it is possible, I would like to verify some more ghostly findings here.

Have you been able to measure the actual frequencies? In particular I am interested in the fq in Hz measured:

A - at the coil Positive (+)
B - at the coil Negative
C - At the battery poles (+) and Negative (-)
D - Your earth wire on occation where:
1) connection increases illumination
2) connection decreases illumination.
E - Take at least 3 identical CFl's - does not matter whatever else you have connected in tubes or so. Take reading at + terminal of coil, add 1x light in series, measure again, add 2nd light in series; measure and add 3rd light..measure.

There is a puzzle embedded here. This might be of help to formulate the DRTheory.

[Aromaz]

Negative Resistance !!! Very nice indeed.

Thanks for that Aromaz and Lid, ill up date Imhoteps/your PDF.
Now also any one interested in that negative resistor thing, Gene gave us te links.
Gene

Thanks to Gene. I have been to JLN labs before, though there I was more interested in the AntiGravity research. This NDR is just possible to solve another problem I have. VERY interesting indeed.

Much appreciated and big "thank you" to Gene.

[Aromaz]

We are in the AIR, nice video Lidmotor

[QUOTE=Lidmotor;36206]Aromaz-- Thanks for saving me a trip to the desert. I reduced the circuit by 2 transistors today to see if it would still run and it did. If I run it on low power mine runs cool and at about 70 mili amps. I also tried multiple cfls and that also worked. In the video I show the HV being pumped out of this thing. It is very strong. A standard 110v neon will light up from only one lead at any place in the circcuit. There is something very strange going on here. With two cfls in series mine will run without the earth ground but at reduced light.]

Lidmotor, just got your video down now. I think the major difference between us is the coil. My coils are low class and has max output 6,800v on HV (when I was doing the original Imhotel single coi/relay). On my coil('s have 4) I can barely hear the resonance, same with younger people. On your video the resonance is very audioble.

On an earlier question: Yes my 555 circuit was connected to the Base of the 2N2222.

Suggest:
A) Add more and more lights till you really see the glow goes down with every new addition. If your coil is stronger than mine, I suspect you will be able to light up much more light than me. That could also be the reason you had trouble with the 2222 since it might not pass enough initial energy for the demands of your coil - AND why I can not get second coil running....and why I needed 3 tertiary transistors..... I will look into other options for this transistor.

B) Consider to get rid of the control pot, see my previous post about DRT.

C) Move earth wire around on circuit to test alternative places each time you change something. Even disconnect.

VERY curious to see video with Tesla transmitter.

I just keep on failing to get my video's uploaded to You Tube. Same mystical message, even translated video to .AVI, same thing "Fail to upload due to unknown error

[ashtweth]

Thanks for that Aromaz and Lid, ill up date Imhoteps/your PDF.

Now also any one interested in that negative resistor thing, Gene gave us te links.

Heres that link from jlnlabs... its been up there for a couple years
now.A Negative Differential Resistance Oscillator with a Negistor
here also this page to a loaded version a similar circuit.

The NDR Oscillator with LOAD
Not sure if its helpful... but probably interesting for those guys to
read. Gene

[Aromaz]

DYNAMIC RESONANCE THEORY So my Dynamic Resonance Theory is:

[Lidmotor]

Part 2 --Aromaz Circuit

Aromaz-- Thanks for saving me a trip to the desert. I reduced the circuit by 2 transistors today to see if it would still run and it did. If I run it on low power mine runs cool and at about 70 mili amps. I also tried multiple cfls and that also worked. In the video I show the HV being pumped out of this thing. It is very strong. A standard 110v neon will light up from only one lead at any place in the circcuit. There is something very strange going on here. With two cfls in series mine will run without the earth ground but at reduced light.

YouTube - Aromaz CFL Circuit--Part 2

Cheers,

Lidmotor

[Aromaz]

ashtweth and Tesla

Sorry, the previous post arrived twice.

[Aromaz]

[Aromaz]

Thank you

@Bodkins
Thanks very much for your video's and input.

You made my day; second person to duplicate and verify. Now I feel more confident since this is not a regional fluke.

How exactly this is working and where all that light power comes from I do not know. Fact is that it is using a very tiny amount form the battery to operate. My earth connection in the lab is not really suitable, but as in previous post: out on the farm it did make much more light.

on this stage only one remark: Add more lights.
This is a real phenomena - the more lights the lower the amp draw.

I plan and hope to have some 18 hours in the lab today.