Imhotep's Radiant Oscillator Video

[Aromaz]

Dear Aromaz,
......Please take care with your EYES!!!
......Your video 21 and 22 clearly indicates that you have run CFL
and long flourescent with 0.02 A. Is that correct?
Can you comment on Video 22? Will you continue with that route?
Nuri Temurlenk,
Istanbul Turkey

@Nuri, the rays are actually HV and radiant energy. In my last video #026 you will see much more about them.

If you mean low energy for lights - YES! That is my ultimate purpose for these experiments - and that of this specific forum thread.

BUT, I am still trying to figure out exactly how this whole thing operates and what are the forces behind it. Only when I got that covered, will I be able to make the light system near-perfect.

[samedsoft]

Aromaz Ball Lightning

Dear Aromaz,

Please be CAREFULL, it seems you are playing with Ball Lightning. So it can reveal Soft Xrays, IR, UV and other waves.

Please take care with your EYES!!!

Your video 21 and 22 clearly indicates that you have run CFL and long flourescent with 0.02 A. Is that correct?

Can you comment on Video 22? Will you continue with that route?

Nuri Temurlenk,
Istanbul Turkey

[stringguy]

ps, i think we should rename Aromaz, Pyromaz !! hahaha

[stringguy]

wood and water

ok,
in an attempt to post something constructive.

WOOD
as an instrument maker i want to point out that WOOD is very responsive to frequency.. so, looking at it that way, it seems obvious(or does it?) why your sparks/energy/frequency/resonance are going through wood.
a long time ago i saw a documentary on wood, and under a very powerful microscope, with a frequency added to the wood, certain particles of the wood align. now i'm talking "dead" wood here, cut and dried, not "living" wood.
hmmm, makes one wonder whats really dead or/and alive, but thats another subject i'm sure.
so, is the frequency carrying the energy? hmmm

WATER
yesterday i came across this guy, after watching loads of his vids, i think these four are very relevant to this thread. and maybe someone senior here should ask him aboard.
YouTube - dielectric constant of water and an oscillator on 3.5 MHz

YouTube - dielectric constant of distilled water/oscillator 3.5 MHz

YouTube - how to calculate and build a capacitor

and my personal favorite, because i love the coil and cap made from the same tiny piece of wire:
YouTube - searching for resonance

ok, hope this helps.
many thanks from

andy

stringguy, not because i understand string theory,(which i dont), but because i used to wind harp strings with a machine i built once, similar to winding long skinny coils. theres a thought

[broli]

The Nevada Lightning Laboratory have succesfully been able to wirelessly power 800 watts of light bulbs at a distance of 5 meters.

Lightning Lab - Wireless Power Study

Not quite there yet. RF is not really Aether now is it. With these big setups tesla probably could have broadcast the power to many miles far away. But good to see big facilities doing experiments.

[Aromaz]

Final video on Sparks ....

My final video has gone alive - this is more about sparks and the purple corona. Time to move on. Now I am targeting to undertand the phenomenon of wireless transmission and receiving better - plan still to use this same circuit.

Video #026 - Final Lab Note on Sparks, Coran and Water.
YouTube - Aromaz #026 - Final Lab Note on Sparks, Corona and Water

[Inquorate]

Wood

Haven't seen Aromaz 025 yet, just quick thought... Tesla's magnifying transmitter, with semi-toroid top had wooden supports... Or is that all they did???

[gotoluc]

Hi Luc,

Nice job! Are you able to adjust the frequency super specific?
If you can do it at 357116hz then you will have a multiple a universal healing frequency.

Hi Aaron,

thanks for the positive comment

Yes I can adjust to a specific frequency. Yesterday I found some very interesting effects and I just finished uploading a new video to show this.

You want to see this. However I could feel that it was better to start a new topic. Please go here to get the newest video test 6: http://www.energeticforum.com/renewa...one-share.html

@everyone, you are all welcome to come



Luc

[Aromaz]

Hho

..........Something as trivial as hho production would be obsolete then........

@Broli, there is still many legs of this energy to explore. It is a real mystery on how it works. I tried a series of experiments with water today, very small amount of that is presented att he end of video #025.

It was quite a remarkable observation I had when considering:
High Voltage, Pulsing effect, salty water, frequency around 3k Hz - well, usually that gives HHO.

However, I tried it with this effect and used three different sets of electrodes - Aluminum, Copper and 304 Stainless - NONE of them made HHO bubbles; not even a little after more than one hour.

It failed the HHO - but it makes me more curious as to why?

[Aromaz]

YouTube - Aromaz 025 - Lab notes with bamboo, capacitor and water.MP4

[Inquorate]

Inquorate schematic

In case anyone wants to duplicate, just hot glue transistors to coil (quite easy to remove, transistor type shouldn't make much difference so long as high rating..) and salt water cap easy to make. Or use baking soda, Alfoil, everything hot glued to piece of wood... Cap just sitting with foil on end of wire, I spread out thin wires for contact and glued only around outside edge. Electromagnet is .25 mm wire on ferrite coil.

Hopefully I'll have time for more testing tonight :-)

YouTube - Inquorate 17

[Vortex]

Detector

Interesting, Please try this someone?!

Take needle nose pilers and burn a match totally and hang it from
a string under a glass jar to detect if torsion waves are in the area.

Source link
Since Inquorate's circuit is compact it would be great
for testing this detector.

I have plenty of spider webs, but I don't know how well they
will travel in snail mail.

Thank you
Randy

[Vortex]

Dammit. Well, to begin, the ignition coil and salt water capacitor and electromagnet and glass eyedropper spark gap tube and cfl are all 'glued' with one of those arts and graft hot glue guns, to a piece of (maybe treated?) pine wood. That wood is sitting on the table you see, which is thin veneer of probably pine, and chip-wood.

The system would be on but not jumping the spark gap, and I could put my hand 5 cm from setup and hertz measured from (unconnected, due to spark not jumping) ground would lower, but spark started jumping and cfl would light up... When I held hand 30cm away just above wood of workbench, no change. When touched wood of bench, sparks started jumping. I noticed this yesterday but didn't really twig that wood was amplifying / channeling my aetheric disturbance ? further from me?
:-)

An EXTERNAL event, touching the Bench which is wood and your circuit is wood caused the bulb to light.
Does the effect due to the external event, touching your bench, happen
any where on the bench, from any point, from any distance?
Is the effect/event distance related or not related to distance but related to
wood/wood contact as in wire/wire contact would be?

More study must be done... Try holding long metal pipe -insulated - and touching far end to various places, versus wooden pole versus plastic pipe.

Curious if the effects are related to only like materials wood/wood
or can move via unlike materials from a distance.
Like a wood screw into the bench at the edge/corner
connected to earth ground?

Effects and lack of, clues , puzzle pieces.

I think, This is not just about through the AIR or through the WIRES.
Events can be conveyed / triggered through any material... ??
Looking for ways to open the "conduits" of energy flow .

The circuit is like a valve that allows the energy to flow,
but this valve can be opened/closed external to the circuit.
Aromaz showed us this also. On/Off by just touching the circuit.

Turning it On externally is an increase or decrease of something pushing
something over a limit which causes the light to glow.

It might not be an On/Off happening.. it might be an increase
in flow of energy happening. Kinda like the breaking of surface tension
in a small tube of water with your finger on the edge to allow the water to flow.

Could not the flow be made smaller or larger external from the circuit as
well? You can tweak the circuit externally.
At least that is what I think I could be seeing in the videos you guys
are making.

Tell me to be quiet if I'm annoying anyone
Just
Randy

[broli]

http://www.free-energy-info.co.uk/Chapter11.pdf

page 16
that why I put this up Broli

Just to get back to you. I got to read the main parts of that and wow it changed my world literally. The explanation of gravity was very simple and logical from an aetheric universe.

Even beyond that I started discussing it with a friend and he casually said "If it's pushing on everything from all directions then it's the stuff that holds everything together?". Which made me suddenly realize that this theory could also apply to the strong electromagnetic force that's holding nuclei together. Since they're really small little aether gas/current/wind... passes through them and thus are held more tightly together.

Thanks bodkins for pointing this cool insight out.

[Inquorate]

In cor ate

I always thought this was funny, relates to my state of mind for the most part......

inquorate definition - Dictionary - MSN Encarta