Stanley Meyer Explained

[dambit]

H2Opower,

I have been reading your progress with this fuel system and it sounds like you are very close to realising it.

I would ask that when you finaly do "crack" this tech, that you write a clear and detailed build guide, simple enough for anyone to follow and get it built. I ask this because I believe that the time has come and gone for secrecy and to be quite frank, most people don't want to have to "figure it out for themselves", they just want to know how to build it (or buy it). The reason we don't have this tech out in the public today is because of Stan Meyers greed. There, I said it. Please don't make the same mistake.

I wish you all the best for your remaining experiments.

Cheers,

Steve

[HMS-776]

tutanka, there is vacuum in the gas processor. Please read the following:

Stan Meyers Water Fuel Injectors explained

On the second post down I give a System Description!

-Enjoy!

[tutanka]

I suppose that H2OPOWER use Aluminium because the electric conductivity is low on this material. But I have a question.. as I have previoulsy written Is my consideration that without an pump or compressor GP don't work. You use anything of these? If yes what is the model that you use for this application?Regards

[h20power]

wont the aluminum oxidize? stainless steel wont oxidize... and the benefit of stainless is that it can be polished to a very high degree because it is so hard compared to aluminum...

You build yours and I will build mine, deal? I am not going to tell you how to build yours and most definitly I wont listen to anyone trying to tell me how to build mine. Plus they are already built, so no turning back now

Have fun building your prototypes everyone, and working on your way towards energy independence .


h2opower.

[TRON]

hey!

wont the aluminum oxidize? stainless steel wont oxidize... and the benefit of stainless is that it can be polished to a very high degree because it is so hard compared to aluminum...

[h20power]

It's Aluminium for after close inspection of Stanley Meyer's Gas Processor it is aluminium too.

Aluminium has the secound to the highest refractive index just under silver and that is why I think Stanley Meyer used it.

Remember build from your own design as best as you can understand and apply what you have learned on this thread


h2opower.

[Radiant_Science]

Must be SS

I doubt it's aluminum, because the aluminum would be reactive to many of the ions the gas processor would be creating. I am pretty certain that must be SS...if not, it should be.

[pmazz850]

I'm pretty sure thats aluminum!

[tutanka]

Well, it looks like photobucket is sort-of up and running though I still can't access the account, but at least the pic's are working again.

Now I have the power of a lightining storm in the palm of my hand for that is the ture source of power from the Gas Processor. Lets keep those prototypes coming for each and everyone means that someone is one step closer to energy independence.


h2opower.

HI H2OPOWER,
I suppose that your tubes are in SS.. You use only photons in your GP? And why you use Stanless Steel material? Thanks for reply me..

[h20power]

Well, it looks like photobucket is sort-of up and running though I still can't access the account, but at least the pic's are working again.

Now I have the power of a lightining storm in the palm of my hand for that is the ture source of power from the Gas Processor. Lets keep those prototypes coming for each and everyone means that someone is one step closer to energy independence.


h2opower.

[h20power]

HI H2OPOWER,
Thanks for your suggestions.
I have a question, as every, the photos submitted are referred to the GP??
Thanks for answer me..

Yes, that's what I came up with for a Gas Processor, though it seems I am now having a problem with photobucket as the photos are nolonger showing up on this thread and I can't access my account it is giving me:

HTTP 403
Most likely causes:
This website requires you to log in.

What you can try:
Go back to the previous page.

More information

This error (HTTP 403 Forbidden) means that Internet Explorer was able to connect to the website, but it does not have permission to view the webpage.

For more information about HTTP errors, see Help.

Seems someone out there doesn't want those photos being viewed But anyway with the information I posted on this thread anyone can build a Gas Processor, VIC transformer, and WFC. The water fuel injectors still need more explaning but the concepts are there as to their functionality. So it is too late for anyone trying to block this information at this late stage of the game. The information it out and the prototypes are being build all around the world. The thing I like it most is the many different designs I have seen, some far more addvanced than my own. I knew that was going to happen for someone always has a better idea when you make things independently with everyones own point of view as they design and build their prototypes.


Energy independence is now ours for the taking,

h2opower.

[tutanka]

HI H2OPOWER,
Thanks for your suggestions.
I have a question, as every, the photos submitted are referred to the GP??
Thanks for answer me..

[h20power]

Been keeping busy

Sorry I am not around much these days but I have been very busy with my own work. Here are some pic's of my prototype as it is just about completed now, enjoy




Now I have a lot of work to do so I will not be even checking in on the site for a few weeks or even months as I make the conversions from gasoline to water as a fuel source. Best of luck to us all, and no I will not talk about my design in detail as of yet.

Energy independence is ours for the taking,

h2opower.

And to tutanka, yes, that is what I wanted you to see and understand, now just build you a prototype, and make it like the way you want it too be, not like mine unless that is already what you had in mind.

[tutanka]

I don't have received any reply and for it I think that my coniderations are right..
However apart to have a clear concept how Meyer system work I'm sure that he have used an special natural water with an conductivity >1500 μS/cm. Regards

[tutanka]

H2OPOWER have indicated video YouTube - Lec 9 | MIT 6.013 Electromagnetics and Applications, Fall 20 and frame time 5:54. Is indicated design of kelvin generator with battery 510V and I have start a little design about that.
Is clear now in my mind how H20POWER it wanted to indicate.. High pressure of 9bar from water pump it creates micro-capacitors and these are charged negatively trought central electrode of "spark plug injector". Is created an pressure flow and high turbolence. No-combustible gas have ONLY initially function of "natural dieletric" for separate positive screen from water/air. In this way is created an complete mixture that it enters in contact with positive screen; water micro-capacitors, when enters in contacts with positive screen, released electrons and these are captured from AIR (-e). This reaction generate hydrogen and oxygen in high quantity. The last step, every inside to spark plug injector, is change of state of hydrogen and this released THERMAL EXPLOSIVE ENERGY.