Stanley Meyer Explained

[tutanka]

[tutanka]

H2OPOWER,
If you are oriented to free energy and you have some experiences you must be patient with we that we must learn. I neef to explain an little on water charge.. I don't understand this stage.. If you can thanks if not I proceed with my experiments.. Regards

[h20power]

Concept is simple and I think it work but there are some parts not clear.
H2OPOWER wrote that "Oxygen unstable react with molecole of water mist".. I'm not sure of that.. Oxygen unstable react with steam water ionized ad in this way conductive for obtain an fast reaction.
About " Thermo Explosive Energy" I think is ONLY change of state of Hydrogen from bi-atomic to monoatomic. I don't think that oxygen unstable have the only function to relased hydrogen. Change of hydrogen state is present on last stage of injector and precisely though the HV field.

Just get some testing under your belt so you can gain a fuller understanding for yourself and start answering some of your own questions. If you are unwilling to try I am unwilling to talk to you. You have to jump into the frying pan on this one and start testing things out. The time has long past for the need of getting some much needed testing done for that bus took off a long time ago. I really meant what I said, " You either get busy trying or get busy dieing." For anymore talks is just a waste of my time without you giving it a shot and starting to answer some of your own questions through expirementations.


h2opower.

[Digits]

Just build it and see thats all we need to build somthing I'm on it but so should all be building prototypes otherwise the thread have no meaning.

Thanks

[tutanka]

Concept is simple and I think it work but there are some parts not clear.
H2OPOWER wrote that "Oxygen unstable react with molecole of water mist".. I'm not sure of that.. Oxygen unstable react with steam water ionized ad in this way conductive for obtain an fast reaction.
About " Thermo Explosive Energy" I think is ONLY change of state of Hydrogen from bi-atomic to monoatomic. I don't think that oxygen unstable have the only function to relased hydrogen. Change of hydrogen state is present on last stage of injector and precisely though the HV field.

[Digits]

Hi guys

Just a suggestion mabe we should just start to buid somthing and learn through our failures,share the work we have done thus we are all learning in a practical way instead of getting confused with all the theory.

I am sure we can get somthing going High vltage pulsed,lasers pulsed, and a electron ecstraction circuit.
and egnite the product somthing must happen and if it dont we know that,this is not the way to build it, try another avanue.
if we are starting to get results it will spur allot of people on the follow.
but for now we need some sort of working device so that we can improve on and not just theory.

But this is just me les build somthing to get started.

Digits

[tutanka]

H2OPOWER,
If you want help peoples you must to be precise, if you have an clear concept you must help us with clear answer. As I have previoulsy written first to start prototype I need to have clear concepts in my mind without these are only words and nothing to other. I don't understand you, you want to help peoples to reach free energy but you stop when one person require your help.Or your objective is to only arrive to a sure point and not to complete the instruction?

[h20power]

I am going to stop posting for a bit to give people a chance to go over everything I posted on this thread in depth and to also teach themselves the concepts that where given out on this thread. Plus I am all burnt out with saying the same thing over and over again and again .

I will check in from time to time but I am nolonger in the mood to teach. I have posted the key to Stanley Meyer's water for fuel technology, not to everyones expectations, but for some people I have delt with want it on a silver plater but, "who cares?," is really the way they make me feel. I pointed everyone in the right direction as best I could and in doing so I feel I have done my part in all of this. In time I expect to hear and/or seen a lot of people starting to become energy independent on their own with the information given in this thread. Or at least trying things out for themselves by builting prototypes and testing them out. For at last we have some math to the works of Stanley Meyer and I think that is saying something.

For those who try enjoy breaking the chains of the energy enslavement game, for those who refuse to try just grow old and die.


h2opower.

[tutanka]

At this point is clear that some peoples as H2OPOWER work basically only on theory. However thanks for info declared but are only info not every of real. However I ask you about an interested question. When atom of oxygen is stripped of 4 electrons and is mixed with charge negatively water sended and charged trought taylor cone RELEASED HYDROGEN AND OXYGEN. Ok but for my mind the reaction start in this way.. For atomic equilibrium law the atom of oxygen strip of 4 electrons when is in contact with "ionized negatively water" (only in this way reaction start immediately for conduction) absorb electrons from atom of oxygen inside water molecule, break water molecule and release hydrogen but... also the atom of oxygen, present into water molecule, is stripped of 4 electrons.. in this way we obtain other instable oxygen atom? Therefore is generated a chain reaction? and this means that then the reaction is self susteined? Thanks for your reply..Regards

[sebosfato]

To make the inductances match you have to do only one coil for each bobbin set and match it up that way, one for each of the chokes, the primary and one for the secondary. All of these only one bobbin space and you take note of the count and measure the inductance with a LCR meter. When this is done you have the wind count for all of the bobbin spaces for the whole transformer. Using a drafting program saves a lot of time and money for you can use a inductance calculator to get it very close to where you want it and you will know the size of the VIC bobbins you have to machine.


h2opower.

[tutanka]

HI H2OPOWER,
I see the videos indicated from you but sorry I don't have understand better how do you want communicate to me, your suggestion.If you can I need an little explaination from you. Thanks

[h20power]

For H2OPOWER,
You refer to Kelvin generator, I posted it.
In fact you obtain separately water charged, negative and positive. Your idea is used ONLY water charged negatively to send to injector??
Please answer me .. Regards

I sent you a video of it, and ask that you look at the set up with the two 510 volt batteries for that it the set up we want.


h2opower.

[tutanka]

For H2OPOWER,
You refer to Kelvin generator, I posted it.
In fact you obtain separately water charged, negative and positive. Your idea is used ONLY water charged negatively to send to injector??
Please answer me .. Regards

[pmazz850]

Interesting patent!

This is something I stumbled across. IMPROVED ionization. US patent 4449159
Patent Login

[h20power]

Hi h20 power can you explain to us how to knowing the capacitance of what it is going to be hooked up?
And how to match bobbin spaces inductively?
And last thing why did you got 3 resonance frequencies? I really didn't understood. I'm sure you know the exact procedure to match the inductance ... please tell us.

Thanks

You start by making it an LC circuit and bring it to resonance with a known inductor. Taking note of the frequency at reasonance you then use that frequency and inductance to solve for the capacitance mathmatically. You can find the formula here: DC Tesla Coil design

In my first try at the VIC transformer the secondary, chokes, and primary all had different inductances thus they all resonated at different frequencies. It is important to match the inductances for each bobbin cavity for if one of the coils isn't in reasonance those coils will be drawing too much current and heat the whole transformer up and cause a melt down, mine did.

To make the inductances match you have to do only one coil for each bobbin set and match it up that way, one for each of the chokes, the primary and one for the secondary. All of these only one bobbin space and you take note of the count and measure the inductance with a LCR meter. When this is done you have the wind count for all of the bobbin spaces for the whole transformer. Using a drafting program saves a lot of time and money for you can use a inductance calculator to get it very close to where you want it and you will know the size of the VIC bobbins you have to machine.


h2opower.