Bedini Ferris Wheel Regauging Motor

[Rl2003]

Wow, I have to go out for a couple days and a avalanche of Great posts come in.
Jetijs beautiful work. That took some time and I hope you learn from what you have if front of you. I remember seeing some coils on the wall, in the pictures of Ed's room. Did not see if there was any thing special about them although. I don't think they where Christmas decorations!!
Also there looks like there was something in the center around the handle missing, there are five or six slots and the don't seem to be there by accident.
I think the locking part was put there to keep people from turning it.
I was only about 7 or 8 the first time I was there and their where not any rails to keep you away then. I didn't know what I looking at either.
But it just so happens I am only an hour and half from there now. I may have to take a extra day to see things first hand again. I'll see if it's open.
There is also a lot of minerals in coral rock that may have added to the lifting that Ed was doing. Just a side note.
As far as the triangle in John's answer, I keep thinking about the Magnets, Coils and the batteries .. the energy is mutiplied in these after it is started??
Are not these somewhat the same? Just a thought but three different forms of storing and using...energy?
I am like a caged Lion waiting to get back to my shop to finish this.
Mark P.

[redrichie]

A galaxy, earth/ moon, atom

[John_Bedini]

Big Bedini Machine

Redrichie,
I know that, that is not what concerns me here. The PHI current is the last thing I'm looking for right at the moment. As I can gather that from the coils. The question is. What does the machine look like . I have somebody that lives very close to the coral castle. He says that more then a pipe is in the ground, but I'm not looking for antigravity here. ED had pipes everywhere for his experiments. The works of this machine have been discovered many times and many different geometries. I do know what the machine should look like and what it could do it could be used for two different functions/ or combined functions. he left two different things and the group just needs to put it together it should be what their after.
John B

[redrichie]

at the entrance to coral castle the star of david. ADM.10 cents drop below. Not cents PHI!!! the golden ratio. John you say Delta PHI. Phi is also the number 21. where do we see this at the castle? on the door with a 16 point sun in the center, and at the bottom right the earth written and 21 over the top.

http://www.code144.com/img/cc-maintour/cc29.jpg

http://www.code144.com/img/cc-maintour/scc08.jpg

[John_Bedini]

Big Bedini Machine

Look I'm going to get to all the answers, but to me it is important that you understand what is going on with that axel motor, I have said it three different ways to get you all to understand. I do think and appreciate Jeremy's work it is real good and detailed. we learn by doing, I will not hand out the schematic drawing for the simple reason I stated in one of my posts, I wont debate that.

I want you to build this on your own, and don't talk to me about money I have spent everything I ever made to understand this energy and starved at times doing it. Wrong thing to say to me. If your thinking about money find a different hobby

I asked a simple question what is ED's machine and can you put it together or not. This is important because then you will understand how my big machine was ideling for no current.


The Conference
I stopped no one from touching or asking any questions about my machine at the conference, I let you walk around it I ran the machine you were allowed to look inside of the star wheel and everything else. I'm not here to bust your chops in any way, but I'm not going to just hand it over as you will not learn anything .

I have tried for years posting diagrams it did no good, people just took it and changed it and put a new name on it and then said it did not work after they goofed it up.

I have given my test. If you build your own machine you will feel better about it. Nobody ever said it was going to be easy and not cost anything to do it. That is the sacrifices we all take if were into this science.

John B

[redrichie]

@ john.
Your axial portion is missing from his. There is a pipe that extends into the ground directly to the left of the flywheel. it has the ability to attach something there.
A collector/generator for this PHI potential you told us about in a post to Jetjis?

My question to this group,
What does ED's machine look like and what parts go in it? He told you about magnetic streams and how they work, you would never believe what it is. I know that some pieces are missing from his workshop never found but hidden somewhere. maybe in one of those big blocks of coral. What does it look like? I'm going to make one and will show it to Aaron.
John B

[Aaron]

magnetic amplification

Karl & Jeremy - I'm on the edge of my chair with everything going on and
am glad there
are others that share the enthusiasm about how profound some of the
concepts are that have been shared!

I was also admiring erfinder's post about doing those tests with
the trifilar because it was the first time I saw that someone else was
doing something similar but for other purposes - I had no idea!

I hope I'm not off topic here but the mag amp concept is interesting. I had
been playing
with that concept on my trifilars with many experiments. For a long time
I had wound 2 windings in series just like in the Telsa pancake method top
of one to the bottom of another - quite a few experiments on the SG with
that. I think there is still a lot to learn about the SG and different things
that can be done to it.

Anyway, with the third winding (none of the wires are twisted and
on a few of my trifilars, the 3rd winding is in the opposite direction).
Anyway, I had done everything from shorting the third winding
(thinking I was creating a stiffer wall for the magnetic field to
collapse against to get a higher pressure spike) to putting a battery on the
3rd winding while doing hv
discharges into the coil (was trying that as a variation to mix HV and low
current with LV and high current) - but on different windings within
one coil. Some of these tests I was trying to experiment with something I
think was related to Baldinelli. That was on my "Gray" motor experiments -
different from the plasma circuits.

Just trying to learn more about the magnetic amplification as I heard
the term before but never looked into it until John brought it up here
and am happy to know there is something to these concepts even
though my intentions for doing these types of experiments were for other
purposes.

Anyway, just contemplating the below post (I shortened it a bit) and
thinking on the others that John already posted. The coils discharging
at different times amazes me more and more each time I think about it.

And in the switch, there are two different dipoles - a battery and a cap.
They are connected with a common positive and the switch looks for a
difference on the negatives.

A common positive connection between two dipoles and having a changing
difference between the negative potentials of each dipole in and of itself
is a location all on its own to tap "cold magnetic current" with no
resistance. I wonder if the cap discharge is pulling in some of this
massless charge from the negative potential difference between those
points as it is sent to the battery.

Think about how these coils are discharging,

Jerdee, great theory, however what is the downfall of the switch? and how
is it wasting power?

I know Ron Cole's notes were never published here on inductors but what would happen if the inductors were not all equal but were in parallel as Ron's notes indicated the current would not increase, only by a fraction that drove GE nuts and what about the two extra windings if they were held at a bias voltage inside. Would you not get the coil discharging at different times.

Three coils. what do they make up geometrical wise?

The capacitor is used in the positive domain and where is the spike really going but by the capacitor in the negative domain is it not going where Mathew said.

Just being sopped up a little at a time by the capacitor since the capacitor does not know what to do with it. Is it not in the circuit to keep the bi-polar switch from cross conduction on the devices, you have a full complementary amplifier in that circuit. I said the diodes must be right on the switch rails. right at the coil

[redrichie]

Ive been wondering about that cooker.

My question to this group,
What does ED's machine look like and what parts go in it? He told you about magnetic streams and how they work, you would never believe what it is. I know that some pieces are missing from his workshop never found but hidden somewhere. maybe in one of those big blocks of coral. What does it look like? I'm going to make one and will show it to Aaron.
John B

[redrichie]

I have to admit with all that is taking place here I have not had a chance to read up on mag amps. But just the name got me to thinking. just my idea.
As the first magnet induces the field in the first coil (right most coil) and it passes into the next coil. (parallel) this coil (far left) is already charged to the same level as the first. Then the second coil gets induced and multiplied as it gets the added field as the second magnet passes over. Amplified with no more input. Then the 2 coils' (ring twice) energy pushes into the third coil and is again multiplied with the final magnet pass. BUT with the added shaped flux field giving extra push added from the scalar south. giving a very sharp and high spike that is then let rip through the cap pulser at the EXACT right time, as Matthew Jones has ingeniously posted.
That shield lights the indicator LED almost the entire way through the vector of the passing magnet. That is really something.

[Bit's-n-Bytes]

Now were getting somewhere

In my opinion it removes the iron from the coil lowering its impedance making a lower henry coil, but just for a moment. In that moment the coil is fired; and little resistance is found by the inrush of electrical energy. But then a beautiful things happens, the coil collapses without the altered impedance state...now that it has huge impedance. The coil releases way more energy than it should compared to the energy input it received from the electrical hit it took. When you play with the impedance of the coil you are able to get an energy gain if done correct. We all know who else has taken advantage of that effect a few months ago on a little Island...There are also several other places you can find people taking advantage of this effect, but the way that our beloved pioneer here has done it, is outstanding.

John, I would like to hear your critique of Jeremy's post and show us how we can polish it even better or get a better understanding of what is going on here. Is he correct? We are learning so much from your work I can't thank you enough for the time you are taking to teach us. I know it takes a lot of energy on your part to just read all that is going on...not to mention all the time you take on typing back to us. Thank you!

The greatest honor a teacher has is when his students can teach the teacher and carry the torch to an even higher place, my physics teacher once told me. I just hope we honor you that way!

Ding; Ding;


Karl

PS: Class please stop the bickering it is distracting. Ever heard of PM's...work it out on your own not in the forum.

Great work Jeremy! Karl thanks for posting this.

Jeff

[citfta]

He also left us the moon pond with the Star of David in the center and the 16 waves around the edge.

Carroll

[everyidea]

ED was kind he left two things at the castle The wheel and what else?
John B

He left his PMH's, coiled jars/bottles, crystal radio parts, electric motor bolted to a wood board, chains, coils, pulleys and tack. But, I think people would be most interested in his actual large PMH, seen below. Both the wheel and the large PMH would be the show stoppers.

He also left us his photo's that he took himself. The photo of him turning the wheel shows many parts that are missing or have changed.

I believe Ed's flywheel is used to induce a current into a PMH, creating DC current and the two together make a generator. It can also be used in reverse to make a motor. So, combined they are a generator/motor.

rw

[Karl_Palsness]

In my opinion it removes the iron from the coil lowering its impedance making a lower henry coil, but just for a moment. In that moment the coil is fired; and little resistance is found by the inrush of electrical energy. But then a beautiful things happens, the coil collapses without the altered impedance state...now that it has huge impedance. The coil releases way more energy than it should compared to the energy input it received from the electrical hit it took. When you play with the impedance of the coil you are able to get an energy gain if done correct. We all know who else has taken advantage of that effect a few months ago on a little Island...There are also several other places you can find people taking advantage of this effect, but the way that our beloved pioneer here has done it, is outstanding.

John, I would like to hear your critique of Jeremy's post and show us how we can polish it even better or get a better understanding of what is going on here. Is he correct? We are learning so much from your work I can't thank you enough for the time you are taking to teach us. I know it takes a lot of energy on your part to just read all that is going on...not to mention all the time you take on typing back to us. Thank you!

The greatest honor a teacher has is when his students can teach the teacher and carry the torch to an even higher place, my physics teacher once told me. I just hope we honor you that way!

Ding; Ding;


Karl

PS: Class please stop the bickering it is distracting. Ever heard of PM's...work it out on your own not in the forum.

I want to discuss the principle of rotational magnetic amplifiers. I had to experiment with this principle, so I tried this....

• Take four wires, any size, but keep them same length and size for now. Keep this simple.
• Wind three wires as a trifilar coil and the fourth one by itself. The trifilar will be the Mag Amp. While the separate coil will be CONTROL. MAKE SURE TO NOT LITZ THE WIRES OR THIS EXPERIMENT WILL NOT WORK!!!
• On the Mag Amp coil, connect one power strand end to the top of the next power strand. This will be two power strands in series!! This will create high inductance on the windings!!! Measure the inductance of these windings and keep the LC meter connected.
• Now short the third available winding on the trifilar and measure the series inductance. It drops!!
• Now take the third winding ( control strand ), place it across a 9 volt battery and measure inductance.
• Flip the polarity on the 9 volt. What do you get? A gigantic inductance rise or lowering of the series power wires depending on 9 volt polarity. You can swing the inductance either way dramatically with very little input.
• Now connect the 4th single strand coil left to the third control winding instead of the 9 volt battery. This extra coil should be in PARALLEL to the control winding of the trifilar mag amp. Think of this as the impedance matched slave coils on the sides.
• Take a large Neo and slam it on top of the slave control winding! Guess what, you control the inductance to the Mag amp coil very easily!!! Both up and down!!! This all requires an A/C wave to control the inductance!!

[Jetijs]

Oh, you mean the clover shaped metal ring, right? As far as I know, the two most important things Ed left were his 24pole flywheel and the perpetual motion holder. That is exactly what I am trying to combine here - to make a huge circular PMH using magnets. Will see what I can do about the clover shaped ring.
If anyone is interested, here is my picture gallery with all the pictures of my various Leedskalnin experiments:

Thanks John.

[John_Bedini]

Big Bedini Machine

Jetijs,
Look at ED's wheel you will see four pieces of Iron on the top that is what collects the Phi current 0 mass-less charge pure potential. What can you do with that?
Great looking machine now make it run. What is missing from the equation. You already have the source here 24 super magnetic poles ready to go. The Phi current can be taped if the rest of the machine is finished. The question again, What Is ED's machine, You all know I'm just not going to give the answer, I want you to think. ED was kind he left two things at the castle The wheel and what else?
Can I have the answer tonight or must I wait. Look at this as being in school the test is given.


John B

Hi John,
Which iron do you mean, that lets you collect the phi field?
Here is my wheel so far: