Bi-toroid Transformer of Thane C. Heins

[Iamnuts]

Power Factor and Demand Charge Penalties — Energy Tariff Experts

Why bother?

[seaad]

OU cont.

Referring to : http://www.energeticforum.com/306841-post622.html

I have made a new test sequence from 1 kHz to 6 kHz.
Input voltage just below 2 Volts (1.98V mean)

Load resistor = 2744 Ohm.

Current at 1 kHz about 8.5[ mA ----> 6 kHz about 1.6 mA.

Phase at 1 kHz about 84.0 degree ----> 6 kHz about 89.4 degree.

Performance: 1kHz = 71%, 2kHz = 92%, 3kHz = 109%, 4 kHz = 135%, 5kHz = 171%, 6 kHz = 237%


Edit: BroM Sorry I am not the man to see the similarities with "Self Assisted Oscillation in a Shorted Coil"
Edit 2: Due to oscilloscope/ probe failure New figures (in blue) adjusted with a 0.45 degree lower value.

Regards / Arne

[BroMikey]

==> UFO

Y

look at the video of the guy with 4 coils


http://www.energeticforum.com/renewable-energy/19849-bitt-overunity-transformer-bi-toroid-thane-h-bill-3.html?highlight=bitoroid

Self Assisted Oscillation in a Shorted Coil


This is of great significance !!!!!

"On rare occasions, Sweet saw this effect, called self-oscillation, occur in electric transformers"

and

"Sweet was also a transformer designer and expert, and he remarked that he had also observed specialized self-oscillation in certain transformers. "



I show the importance of knowing and understanding the A Vector Potential and how simple it is to create a self assisted oscillation. This set of shorted Self Assisted Oscillating Coils. This can be improved hugely and is possible to be made to self run with this technology. Nikola Tesla, Floyd Sweet, Lester Hendershot, Edd Leedskalnin and Daniel McFarland Cook all knew about this technology. They all used it in various ways to improve their devices....




https://www.youtube.com/watch?v=iJsVSMQqCOM

[BroMikey]

Hey Mikey,

WTF was that???!!!

Geez Bro, well...I know, it means you are working on it...

The heck...it works right?



To me, the above is the most important data of all...




Good to see you working Mikey!!!...


Ufopolitics

Hey UFO and the gang

I guess I'll have to recheck it.

No really i got like 50% more out but it was a while back so I will
dig up my old thread. This I recall, it got me all excited a few winters
back and thought I had solved the worlds energy crisis. Well not.

But it did excite me when I got more out on the meters and you know
what everybody says? Meters don't lie.

Have a great day Sir

[Ufopolitics]

This is the one i ran at 60hz off a variac at 10v and now i want to
use an amplifier like Bill Alek does.

The result on mine was good, I ran cos .2 also on the scope, it works.


http://flyer.thenetteam.net/1BiTT3.jpg

Hey Mikey,

WTF was that???!!!

Geez Bro, well...I know, it means you are working on it...

The heck...it works right?

One thing that gives strength to any of electromagnetic coupling...is the CORE FLUX TRANSFER...considering -on this particular case- that Prinmary do NOT get the "Back Flux" from secondaries, hence, keeping zero at primary WHEN LOADED.

To me, the above is the most important data of all...

Anyways, I see your flux is communicating by "Space-Transfer"...


Good to see you working Miley!!!...


Ufopolitics

[seaad]

This is the one i ran at 60hz off a variac at 10v and now i want to
use an amplifier like Bill Alek does.

The result on mine was good, I ran cos .2 also on the scope, it works.

http://flyer.thenetteam.net/1BiTT3.jpg

Bro
Yours Have 3 coils, Mine 4 !!
se pic

(cos 0.2= 78 degrees )

Regards /Arne

[BroMikey]

==> UFO

Y

This is the one i ran at 60hz off a variac at 10v and now i want to
use an amplifier like Bill Alek does.

The result on mine was good, I ran cos .2 also on the scope, it works.


http://flyer.thenetteam.net/1BiTT3.jpg

[seaad]

==> UFO

Y

[Ufopolitics]

UFO

Sorry I have my test result! Faulty or not.
PLEASE! Build and prove me Wrong.
I dont care how the contraption looks like. For me It only have to work as is.

Regards
Arne

Wow!! Seaad, relax man!!...take a chill pill...

It don't work...so what good is it for?...EXCEPT for trying to REPAIR WHATEVER IS WRONG?

I was just trying to express my point of view...In order to help you...so take it easy


Ufopolitics

[seaad]

UFO

Sorry I have my test result! Faulty or not.
PLEASE! Build and prove me Wrong.
I dont care how the contraption looks like. For me It only have to work as is.

Regards
Arne

[Ufopolitics]

Hello All

I have just done a new quick test of the bi-toroid concept with a successfull result. Successfull until I find whats wrong. .

I have made several such tests before without good final results (<1 ).

It should be fine if someone else here could make a similar test to confirm (my)/ the test result.

I took two fat ferrite U-cores and four smaller television fly back cores, SEE PICs. One of the fat core and two of the FBC:s only acts as an "I" !! SEE drawing.
I have TWO input coils in parallell and the output coiil in series , right now.

The Input coils have 2x200 turns and output 2x100 turns(unsure). Load resistor = 4249 Ohm (sertainly not optimum, quick test) and phase & current resistor at input = 2 Ohm.

Results: Input; 5 kHz, 1.7545 Volt, 1.785 mA, phase 88.3 degrees cos=0.02966. . .Input power: V x A x cos
Output ; 0.7523 Volt over 4249 Ohm . . . Output power: V sqr / R

This gives: Input =1 Output =1.433 , i.e 143 %

But my scope is a simple USB Welleman-type so some tenth part of a degree can be inaccurate. The Volts and mAmps are measured with a Fluke DMM and checked on the scope to see if the figures seem to be relevant.

Regards
Arne

[Ufopolitics]

[VIDEO]https://www.youtube.com/watch?v=k2H5BerC9Go[/VIDEO]

https://www.youtube.com/watch?v=k2H5BerC9Go

https://www.youtube.com/watch?v=k2H5BerC9Go

Very Good.

Thanks so much Vid!!

I enjoyed that video all the way!!

It helps a lot to observe the Architecture of that Full Core in detail...as well as we all could see the Steel Lamination's Tape behind on the shelf...

If we notice, when making that core, the secondaries take exactly DOUBLE the amount of laminations compared to the primary cross section...Thanks also for posting that nice and big pic of it from patent and from your desk.

All this "small data" pieces by pieces...put together will bring Us all the light very soon...

Thanks friend!!


Regards


Ufopolitics

[seaad]

Over Unity

Hello All

I have just done a new quick test of the bi-toroid concept with a successfull result.

I have made several such tests before without good final results (<1 ).

It should be fine if someone else here could make a similar test to confirm (my)/ the test result.

I took two fat ferrite U-cores and four smaller television fly back cores. One of the fat core and two of the FBC:s only acts as an "I" !!
I have TWO input coils in parallell and the output coils in series , right now.

The Input coils have 2x200 turns and output 2x137 turns. Load resistor = 4249 Ohm (sertainly not optimum, quick test) and phase & current resistor at input = 2 Ohm.

Results: Input; 5 kHz, 1.7545 Volt, 1.785 mA, phase 87.85 degrees cos=0.02966. . .Input power: V x A x cos
Output ; 0.7523 Volt over 4249 Ohm . . . Output power: V sqr / R

This gives: Input =1 Output =1.134 i.e 113.4 %

But my scope is a simple USB Welleman-type so some tenth part of a degree can be inaccurate. The Volts and mAmps are measured with a Fluke DMM and checked on the scope to see if the figures seem to be relevant.

Edit: Due to oscilloscope/ probe failure New figures (in blue) adjusted with a 0.45 degree lower value.

Regards
Arne

[vidbid]

Energy CAN be CREATED Bi-Toroid Transformer Operating at Infinite Eficiency with Zero

[VIDEO]https://www.youtube.com/watch?v=k2H5BerC9Go[/VIDEO]

https://www.youtube.com/watch?v=k2H5BerC9Go

https://www.youtube.com/watch?v=k2H5BerC9Go

Very Good.

[vidbid]

Reporting on &quot;Energy CAN be CREATED&quot; Video

[VIDEO]https://www.youtube.com/watch?v=k2H5BerC9Go[/VIDEO]

Energy CAN be CREATED Bi-Toroid Transformer Operating at Infinite Eficiency with Zero PF Dec 7, 2014 - YouTube

https://www.youtube.com/watch?v=k2H5BerC9Go

INTRODUCTION to Potential Difference Inc. Bi-Toroid Transformer (BiTT)

DasVIDaniya