The Golden Tractate of Hermes Trismegistus applied to electromagnetism

[MonsieurM]

"Before I put a sketch on paper, the whole idea is worked out mentally. In my mind I change the construction, make improvements, and even operate the device. Without ever having drawn a sketch I can give the measurements of all parts to workmen, and when completed all these parts will fit, just as certainly as though I had made the actual drawings. It is immaterial to me whether I run my machine in my mind or test it in my shop. The inventions I have conceived in this way have always worked. In thirty years there has not been a single exception. My first electric motor, the vacuum wireless light, my turbine engine and many other devices have all been developed in exactly this way." N. Tesla

a fractal construct has an 'efficient function', it has a fractal ergonomy to them, they function on multiple levels and in multiple dimensions:

+ compare the following designs

Aquamarine Dreams - 02 + Nikola Tesla: Mechanical Oscillator ~ US Patent # 514,169 & # 517,900 ~ Tele-Geodynamics

[MonsieurM]

Tesla Patent 787,412 - Art of Transmitting Electrical Energy through the Natural Mediums

just dawned on me ....... we can change perspective as like Pyramids viewed from top

what do you see

Analogy is perhaps the most powerful conceptual tool for understanding new phenomena or opening new areas of investigation

Thomas H. MORAY

what would happen if you spinned the following with current passing through it ( and maybe not allowing it to discharge as in the picture ) ...... like the Tesla Egg of Columbus



recognize the bump same as :

"Before I put a sketch on paper, the whole idea is worked out mentally. In my mind I change the construction, make improvements, and even operate the device. Without ever having drawn a sketch I can give the measurements of all parts to workmen, and when completed all these parts will fit, just as certainly as though I had made the actual drawings. It is immaterial to me whether I run my machine in my mind or test it in my shop. The inventions I have conceived in this way have always worked. In thirty years there has not been a single exception. My first electric motor, the vacuum wireless light, my turbine engine and many other devices have all been developed in exactly this way." N. Tesla

a fractal construct has an 'efficient function', it has a fractal ergonomy to them, they function on multiple levels and in multiple dimensions:

[MonsieurM]

EQUILIBRIUS GRID by JON DEPEW / CORAL CASTLE CODE / Discovery 2004 - YouTube

and the site linked to it :

CORAL CASTLE CODE / JON DEPEW / FORMULA of ENERGY

magnetic spin tops

Leviton floating magnetic spinning top demo - YouTube



you can also check out :

Dreidel - Wikipedia, the free encyclopedia







------------------
Spinning Top Levitation - YouTube

not sure of the validity of the text .... but interesting : Nikola Tesla's Flying Machine - his Flying Stove

How Tesla intended to power his flying machine


"The flying machine of the future -- my flying machine -- will be heavier than air, but it will not be an airplane. It will have no wings. It will be substantial, solid, stable. You cannot have a stable airplane. The gyroscope can never be successfully applied to the airplane, for it would give a stability that would result in the machine being torn to pieces by the wind, just as the unprotected airplane on the ground is torn to pieces by a high wind. My flying machine will have neither wings nor propellers. You might see it on the ground and you would never guess that it was a flying machine. Yet it will be able to move at will through the air in any direction with perfect safety, at higher speeds than have yet been reached, regardless of weather and oblivious of 'holes in the air' or downward currents. It will ascend in such currents if desired. It can remain absolutely stationary in the air even in a wind for great length of time. Its lifting power will not depend upon any such delicate devices as the bird has to employ, but upon positive mechanical action." [Here it is again: "mechanical"]

"You will get stability through gyroscopes?" I asked. " Through gyroscopic action of my engine,* assisted by some devices I am not yet prepared to talk about," he replied.
* [notice that 'eccentrics' G,H,J, & K in the drawing below, DO throw their weight around in a "gyroscopic action", like spinning tops. The "device" could be the orientation of the 4 objects which generates an unprecedented, physical law breaking, 5th spin, 5th orbit, without the centripetal force physically needed to hold it there.]

Science: "The ability of a gyroscope to 'defy gravity' is baffling." and "When a force is applied to try to rotate the spin axis of a gyroscope, the gyroscope reacts to the input force along an axis perpendicular to the input force" "according to the right-hand rule". This is called "gyroscopic precession".

Dr. Tesla smiled an inscrutable smile. "All I have to say on that point is that my airship will have neither gas bag, wings nor propellers," he said. "It is the child of my dreams, the product of years of intense and painful toil and research. I am not going to talk about it any further. But whatever my airship may be, here at least is an engine that will do things that no other engine ever has done, and that is something tangible."

[MonsieurM]

The Emerald Tablets of Thoth - Secret of Secrets

Four is it in qualities,
shining in each of the planes of existence,
but thirteen ( 13 - Death ) in one ( 1 - Magician ) ,
the mystical number.
Based on the qualities of man are the Brothers:
each shall direct the unfoldment of being,
each shall channels be of the Great One.

Copper is diamagnetic so it repels a moving magnet. Copper is -1 on the diamagnetic scale. Bismuth is -16.6 Pyrolitic carbon is -40! Water is about the same as copper. -.9


16.6 = 76 = 13
40 = 4

Triangular book of St Germain



the center is a Bismuth Bicone Coil in high speed revolution in opposite direction ( like a Wimhurst machine Wimshurst machine - Wikipedia, the free encyclopedia ...... but different geometry ) to deflect and redirect Magnetic waves ......,possibly like a water vortex imho





now i can interpret the stars ( go from bigger to smaller as if sucked into a hole )






Another Device that makes use of Bismuth in its Center :


bismuth is also an element used in the construction of a Moe Joe Cell: Official Website of The Moe-Joe Cell Spherical 316 Non-Magnetic Stainless Steel Joe Cell

Dave... I think you will recognize the design as it match your post http://www.energeticforum.com/191745-post772.html

Q - How much hydrogen gas does the Moe-Joe cell produce?

A - Initially, the Moe-Joe cell was not conceived as a hydrogen producer. It was created because it concentrates orgone energy, which can be used for combustion in internal combustion engines and also for healing. However, since some people have thought of using it as a HHO producer, it has shown some considerable results. (See Brett's 3000GT results on the Testimonials page)

----------------

and if you like Walter Russell

[MonsieurM]

"siccity of the incombustible nature" = "attenuation"

= Bismuth (Group, period, block: 15, 6, p , Element 83 ) = Google

Take our Materium Magnesiam, Plumbum Nigrum, also called Bismuth or Puch

Alchemy Rediscovered and Restored: 'AUREUS,' Or The Golden Tractate: Section I



+

Download Lenz Law "Eddy Current" Experiments 1 of 3 - Magnets falling through copper, PVC and PVC with copper video in MP3, MP4, FLV, WebM, AVI and HD - YoutubeAVI

It takes about 6 seconds for the magnet to fall through the copper tube I have. If that tube were made of bismuth, I think that same magnet would take maybe 10- 15 seconds to fall. If the tube were made of pyrolitic carbon, the magnet might not fall through at all. Just float. Or it might take a minute or 2 if it did go down. Copper is diamagnetic so it repels a moving magnet. Copper is -1 on the diamagnetic scale. Bismuth is -16.6 Pyrolitic carbon is -40! Water is about the same as copper. -.9

+

Gordon Wardle-- Deflecting Magnetic Shield -- US Patent Application 20060083831

+

High Energy Bismuth, more than just a pretty curiosity - YouTube

Published on Dec 3, 2012

my expierements with high voltage high temperature arcs and bismuth electrodes, boiling bismuth to gas phase

note the effect it has on the recording cam

etc.....



Otis T.Carr: The Utron Electrical Accumulator ~ Articles, Model Construction Plans, US Patent # 2,912,244 &c...

Introduction

In the late 1950s, Otis Carr claimed to have discovered what he called the "Utron", a "molecular shell" that houses the atoms. The cohesion of molecular shells is brought about by inertial systems in the gravity field, manifesting in the two poles of natural magnetism and electromagnetism. He claimed that by "hatching" the atomic egg, particularly of paramagnetic and diamagnetic elements (especially bismuth),

[MonsieurM]

the following is called Sri Yantra

Sri Yantra - Wikipedia, the free encyclopedia

Maha MeruAn


The two dimensional Sri Chakra, when it is projected into three dimensions is called a Maha Meru (or Great Mountain cf: Pyramids viewed from top)

Otis Carr Flying Machine - KeelyNet 12/23/01

The Shri Chakra is also known as the nav chakra because it can also be seen as having nine levels. "Nine" comes from "Nau or Nava" of Sanskrit. Each level corresponds to a mudra, a yogini, and a specific form of the deity Tripura Sundari along with her mantra. These levels starting from the outside or bottom layer are:[1]

Trailokya Mohan or Bhupar, a square of three lines with four portals
Sarva Aasa Paripurak, a sixteen-petal lotus
Sarva Sankshobahan, an eight-petal lotus
Sarva Saubhagyadayak, composed of fourteen small triangles
Sara Arthasadhak, composed of ten small triangles
Sarva Rakshakar, composed of ten small triangles
Sarva Rogahar, composed of eight small triangles
Sarva Siddhiprada, composed of 1 small triangle
Sarva Anandamay, composed of a point or bindu

if you believe in UFO ......... Otis T.Carr: The Utron Electrical Accumulator ~ Articles, Model Construction Plans, US Patent # 2,912,244 &c...

Introduction

In the late 1950s, Otis Carr claimed to have discovered what he called the "Utron", a "molecular shell" that houses the atoms. The cohesion of molecular shells is brought about by inertial systems in the gravity field, manifesting in the two poles of natural magnetism and electromagnetism. He claimed that by "hatching" the atomic egg, particularly of paramagnetic and diamagnetic elements (especially bismuth),

[morpher44]

attenuation

"siccity of the incombustible nature" = "attenuation"

[MonsieurM]

the following is called Sri Yantra



you would not think to find it here :



yet if you watch the following you'll get to see it




ps: Female members of the tribe have been doing it for 4000 years

[MonsieurM]

a repost from another thread / as it fits quite nicely in this thread : http://www.energeticforum.com/renewa...ations-16.html

"Well, Honeycomb, won't ya be my baby, Honeycomb be my own"


I'm searching for more evidence that this style coil yields a larger
magnetic field...

Honeycomb Shape:



MetaTron's cube:




http://en.wikipedia.org/wiki/Metatron's_Cube



http://en.wikipedia.org/wiki/Saturn's_hexagon

Optics InfoBase: Optics Express - Unidirectional broadband radiation of honeycomb plasmonic antenna array with broken symmetry






--------------------------------------------

CADUCEUS COIL LEVITATION 1 - YouTube

A 2 INCH CADUCEUS COIL ENERGIZED BY A 23 HERTZ SINE WAVE
IS LEVITATING AN N45 ONE INCH SPHERE MAGNET WITH EASE
VERY INTERESTING RESULTS FROM SUCH A SIMPLE COIL

gatewurm 3 months ago

Your welcome to try the 'set-up' used in this video

I use 'Audacity' and generate a 23 hz sine wave

From the 'headphone-out' of the computer to the signal input of a 100 watt car stereo amplifier with the gain turned all the way down

Left channel out to the coil

The volume in 'Audacity" and the computer are at max

Adjust the track gain to vary the intensity

The magnet is an 'N45' 1 inch neo

g

Caduceus + Honeycomb




one more piece of info for you ..... From Mother Nature

And This compilation of stars, planets, gas and dust rotates at approximately 270 kilometers per second (168 miles/second), which translates to 970,000 kilometers/hr ( 600,000 miles per hour). And the note that impressive rotational speed translates to? B Flat.

the difficulty is to figure out Bflat frequency ..... based on either 440 HZ standard or 432 HZ Natural ......

440Hz to 432Hz


----------

Ban (law) - Wikipedia, the free encyclopedia)

When calculated in equal temperament with a reference of A above middle C as 440 Hz, the frequency of the B♭ above middle C is approximately 466.164 Hz. See pitch (music) for a discussion of historical variations in frequency.

------------------------ check this out

a little search on the caduceus + Bees in symbology

Laughing Cavalier - Wikipedia, the free encyclopedia

There are many emblems in the embroidery: signifying "the pleasures and pains of love" are "bees, arrows, flaming cornucopiae, lovers' knots and tongues of fire", while an obelisk or pyramid signifies strength and Mercury's cap and caduceus fortune.[4]

been laughing at us since 1624

[MonsieurM]

Hey Bro your gonna like this

http://www.energeticforum.com/renewable-energy/9656-electric-field-magnet-43.html#post223133

excellent Dave ..... a beautiful sacred geometry :

[MonsieurM]

A little burst of info

Demagnetization by rapid spin transport

The fact that an ultrashort laser pulse is capable of demagnetizing a ferromagnetic layer in a jiffy has been well-known since approximately 1996. What we don't yet understand, however, is how exactly this demagnetization works. Now, physicist Dr. Andrea Eschenlohr and her colleagues at the Helmholtz Centre Berlin and Uppsala University in Sweden have shown that it turns out not to be the light pulse itself that prompts demagnetization.

Read more at:

"This allowed us to demonstrate experimentally that during this process, it isn't the light itself that is responsible for the ultrafast demagnetization but rather hot electrons, which are generated by the laser pulse," explains Andrea Eschenlohr

Read more at:

+


The inventions, researches and writings of Nikola Tesla, with special reference to his work in polyphase currents and high potential lighting

CHAPTER XXXVI.

THERMO-MAGNETIC MOTORS AND PYRO-MAGNETIC GENE-
RATORS , 424





+

Heat pulse magnetic switching enables 200Gb/s hard drives – Computer Chips & Hardware Technology | Geek.com

Physicists 'record' magnetic breakthrough

has demonstrated that the positions of both the North and South poles of a magnet can be inverted by an ultrashort heat pulse, harnessing the power of much stronger internal forces of magnetic media.

see also Demagnetization techniques and Ions produced by a flame carry a current | Nuffield Foundation

---- one more Pattern

Oscar C. Blomgren: Electrostatic Cooling ~ Collected patents & articles

There are three conventional ways to transfer heat: Conduction, Convection, and Radiation. Now there is a fourth way, Electrostatic Cooling (ESC), that has been discovered and patented by Oscar C. Blomgren (Sr. & Jr.) and others. Negative ion probes are placed near a heated object, which is grounded. When high voltage is applied, there is a dramatic drop in temperature. This extremely simple system reduces or eliminates the need for other methods, and it uses very low power and is very efficient. It also facilitates heating when applied in reverse!

replace the word Flame with Plasma

[MonsieurM]

Eguchi Electrets from The Encyclopedia of free energy,energy21.org,energy 21 org Geoff Egel



+

Karl Schappeller: Glowing Magnetism Prime Mover



one more : James Y Johnson -- Dipolar resonance -- Anomalous dispersion bands

The growth of crystals, as well as of organisms, can be stimulated by the process according to the invention, if the mother liquor is exposed to a varying field of suitable frequency during crystalization. Of course it is not implied that the cause which promotes inorganic growth is preceisely the same as that which promotes the organic growth.

D. Storage of Energy

Electrets, that is to say, permanently polarized dielectrics ( the electrical analogues of permanent magnets ) can be made by subjecting a melted dielectric to the process according to the invention and then allowing it to solidify. Electrets produced by other process are, of course, already known. Thus a mixture of 100 gr glycerine, 50 gr beeswax, 550 gr montan wax and 400 gr pine resin was melted at 110* C and a layer 8 mm thick exposed for 10 minutes to a varying field fed by a generator giving 22.5 watts at a frequency correpsonding to a wavelength of from 145 to 185 cm on which was superimposed a constant field arising from a potential difference of 12,000 volts between plates 10-20 mm distant. The temperature was lowered to 20* C within 3 minutes. Permanent surface charges of the resulting plate up to 2 x 10^-9 coulomb/cm^2 were obtained.

Substances thus endowed with energy from polarization can be used to supply animals with energy in an effective form. For when the substances are melted or otherwise "unfrozen" in or on the body of the animal, the energy stored is liberated. Medicaments already known may thus be rendered more effective.

Thus a medical plaster was made by adding 6 gr of euphorbium powder to a melt containing 64 gr of turpentine, and spreading the mixture on a silk cloth. While the mixture was melted at 85* C it was exposed for 5 minutes to a field of frequency corresponding to a wavelength of 235 cm on which was superimposed a constant field arising from a potential difference of 8500 volts. it was then cooled within 2 minutes to 15* C. The resulting surface charge was 0.7 x 10^-9 coulomb/cm^2.

Medicaments for internal use can be prepared in the same way. Thus disinfecting pastileles consisting of beeswax and gums together with the usual drugs were exposed for 10 minnutes in layers 5 mm thick at a temperature of 55* C to a field given (as above) by lambda1 = 312 cm, N1 = 150 watts; lambda2 = 145, N2 = 25 watts, on which was superimposed a constant field arising from a potential difference of 12,000 volts. After cooling to 15* C within two minutes the resulting surface charge was about 10^-9 coulomb/cm^2.

Again photographic plates, endowed with permanent polarization by subjecting them to a process according to the invention during preparation, may have an increased sensitivity, especially in the red and infrared.

Dielectrics with permanent polarization charge have a greater dielectric strength in consequence of their anisotropic inner structure if stressed in the direction of the dipole axes subjected to orientation.

E. Chemical Reactions

The changes consdiered so far might be classed as physical rather than chemcial; but if sufficiently strong fields are employed, the process according to the invention can induce definite chemical reactions.

---------------------------

Reproduction 1892 Tesla High Frequency Induction Coil from London Lecture

Dave remember our old Thread : http://www.energeticforum.com/renewa...-crystals.html

just realized the crystal shown in the vid is an ELECTRET

4-22 In Search Of... The Bimini Wall (Part 3 of 3) - YouTube

Atlantean Crystal Sphere, Atlantis, Pyramids, Ray Brown, Cayce



Karl Schappeller: Glowing Magnetism Prime Mover

[MonsieurM]

Hey MM good info on the electret I wonder if ice could form an electret, I have never tried to form it in an electric field.

good research as usual

dave

good reading you Dave ..... only experience will tell

James Y Johnson -- Dipolar resonance -- Anomalous dispersion bands

Before entering into details of this phenomeon, some observations may be made on the determination of the natural frequencies. From the previously described connection between resonance frequency and anomalous dispersion position it results that the latter is a suitable indicator for the resonance frequency. It is only necessary to follow the frequency dependence of a constant of a substance suitable for the range of waves concerned up to the anomalous position. The dielectric constants are especially suitable for this purpose. My foreign correspondents have found that there are two sharply separated kinds of anomalous dispersion which may be differentiated as friction dispersion and resonance dispersion. Friction dispersion appears in all non-conducting dielectrics. With water for example it is shown in Figure 2, wherein the curves shows the course of the dielectric constant when using varying wavelengths for observation, and exhibiting a band of anomalous dispersion at a wavelength of about 1.5 centimeters.

[Dave45]

Hey MM good info on the electret I wonder if ice could form an electret, I have never tried to form it in an electric field.

good research as usual

dave

[MonsieurM]

Eguchi Electrets from The Encyclopedia of free energy,energy21.org,energy 21 org Geoff Egel


+

Karl Schappeller: Glowing Magnetism Prime Mover

In a book titled The Physics of the Primary State of Matter, published in the 1930s, Karl Schappeller described his Prime Mover, a 10-inch steel sphere with quarter-inch copper tubing coils. These were filled with a material not named specifically, but which is said to have hardened under the influence of direct current and a magnetic field [electro-rheological fluid]. With such polarization, it might be guessed to act like a dielectric capacitor and as a diode.

The same material is inside the rotor. The transfer of electrons upward, and the magnetic field of the sphere combine to turn the rotor. No direct conversion of this energy to electricity is described, but the rotor could be attached to a generator...

According to Schappeller, the amount of this sustaining rotation of the device would be termed.

one more : James Y Johnson -- Dipolar resonance -- Anomalous dispersion bands

D. Storage of Energy

Electrets, that is to say, permanently polarized dielectrics ( the electrical analogues of permanent magnets ) can be made by subjecting a melted dielectric to the process according to the invention and then allowing it to solidify. Electrets produced by other process are, of course, already known. Thus a mixture of 100 gr glycerine, 50 gr beeswax, 550 gr montan wax and 400 gr pine resin was melted at 110* C and a layer 8 mm thick exposed for 10 minutes to a varying field fed by a generator giving 22.5 watts at a frequency correpsonding to a wavelength of from 145 to 185 cm on which was superimposed a constant field arising from a potential difference of 12,000 volts between plates 10-20 mm distant. The temperature was lowered to 20* C within 3 minutes. Permanent surface charges of the resulting plate up to 2 x 10^-9 coulomb/cm^2 were obtained.

---------------------------

Reproduction 1892 Tesla High Frequency Induction Coil from London Lecture

The impregnation mixture is beeswax mixed with Boiled Linseed
Oil and Mineral Oil to make a Vaseline type consistency.