Announcement

Collapse
No announcement yet.

Pyramid

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • blackchisel97
    replied
    something to watch

    I found this video inspiring - YouTube - Nature Was My Teacher The Vision Of Viktor Schauberger


    Vtech

    Leave a comment:


  • NickZ
    replied
    Sucahyo:
    Yes, they can be combined, but, Coil Pulsing has not really been shown or proven to work to any useable degree, and requires an external input source to function, if at all.
    Connecting a solar panel direct to Leds will provide much more Current and therefore brighter Led light, than going through a circuits like Joule Thiefs, etz. that will provide little current in order to provide some voltage. No real gain there that I can see. Only if one want to light leds with an Jt using only one volt, other than that, they are practically useless circuits, although fun to play with. On the other hand Solar provides LOTS of current for work.
    High voltage low current systems are also useless for our current appliances.
    Mechanical devices are noisy. So, are HV spark disruptive discharge systems.
    Magnetic, silent, safe, touchable, non moving, cold electric power devices are what I am interested in. As in the previous Tomata's video showing the incandescent bulbs lighting off of almost anything, even if only for a second.

    Space Antenna- no one knows if AC is what is really needed. Next step may soon be known, but only if we work on it. It's up to us at this point.
    Some guys are making interesting progress, although still no cigar. Bashar's limited instructions need to be followed first as suggested:
    Full size 2 foot high model, inside of a three of four sided pyramid, jumped started with a current that will make it resonate with the Earth current. Possibly the same earth current frequency is what is needed to jump start it. Those who can do that test may want to try it.


    Scalar waves devices can manipulate temperature, weather, storm directions, etz... but I don't see anyone with a home made back yard device, yet. These Tesla technologies, are being "allowed" to be used by secret black government Haarp type military projects. Bearden seam to have a good grasp on that subject. Russian are still ahead in that race, with their third generation Scalar Wave technology.
    Who know which storms are natural and which are man made, anymore. With many facilities around the world as well as satellites in space zapping our planet and us daily.
    Those who still chose to live in a big cities, may be even more affected by the increasingly present Earth changes, than people living in a more natural country settings. Might be easier to leave now than after what Japan, Haiti, and Chili, went through. With possibly even more quakes and waves to come.
    Sorry for my rantings, I just can't help it.

    Leave a comment:


  • sucahyo
    replied
    Originally posted by NickZ View Post
    I still feel that the tapping of the Aether by utilizing the power of the vortex is the way to go. And not the disruptive pulsing of coils with external input.
    Do you think combining both can not be done?


    Do bashar specifically mention AC or just jump start oscillation which can be arbitrary voltage or frequency? 1KHz pulse at 12V for instance?

    About earth quake and rain, what kind of device do you currently have something that you think can have effect on rain and quake?
    Last edited by sucahyo; 04-12-2011, 03:23 AM.

    Leave a comment:


  • NickZ
    replied
    Sucahyo:
    Thank you for sharing your results with your antenna coil. We may have to wait for the next step to be disclosed now. Don't hold your breath though.
    Charging an AC capacitor with 120 volt current and discharging it into the coil may fire it up. Worth a try... he did say AC, but also using direct AC through a dimmer switch might work to help to lower the burning and pitting of the coil.

    Today it rained very very hard and there was also a small earthquake here.

    Leave a comment:


  • NickZ
    replied
    Blackchisel and All:
    Remember that Bashar said that the inverse coil antenna needs to be at least the 2 foot tall by 1.2 foot (minimum size) in order to see Any Significant effect.
    I asked the question concerning any observed results to a couple of the other guys who have made some smaller model sized space-time antennas, and still, for far, they have not seen much if any results.
    The guy who made the full sized space antenna, has also not mentioned having anything new and exiting to report, as of yet.

    The person who came up with the pyramid mind device diagram has not joined our group, or answered back after I made the invitation to him to join in with us here. I'm still hoping that he will still make it here though.

    Concerning coil pulsing and the harvesting of the BEMF field. Thousands of different coil designs have yet to produce any significant effects. Even John B is not claiming any provable OU results. But sells his coil systems for testing and experimental purposes, and not for the purpose of lighting ones house.

    I still feel that the tapping of the Aether by utilizing the power of the vortex is the way to go. And not the disruptive pulsing of coils with external input. This is only my opinion, so please don't be upset with me, if you don't agree.
    It is the road that I will follow... even though there has also not been much results in that direction, either, or any other for that matter.

    I trust that what Bashar is suggesting, must have some merit and useful purpose, as well as Russel's ideas, who was a bit more down to Earth.
    They must both be having a good laugh while watching us scrambling in the dark.
    My suggestion is to follow Bashar's advice and to make the minimum sized coil (2 foot tall, or bigger) and "play" with that inside of a tetrahedron, or a pyramid. I will also do the same as ASAP. Although some positive feed-back results would certainly be nice to see or hear about, for a change.

    My cement batteries still lose their voltage as well as their current output after being on all night, and in the morning only a dim light is still coming from the led. Once disconnected from the led they bounce back, but only to lose their strength once again when reconnected next time around.
    Newer and hopefully improved ones are one their way.

    One of the better known and respected fellows of another forum that goes by the user name of Wattsup has met with the 50 year old kid from Canada, Daniel, and personally watched as well as participated in a several hour demonstration. He mentioned that once Daniel's devices are activated, they will continue to function, even while Wattsup was holding the devices in his own hands, with No external input of any kind. I had read about this kid, and his simple handmade coils devices before, many years ago.
    Daniel says that thinking too much is not the way to "knowing", about these things. The way to know, is to let your heart do the thinking. Nice!
    Bc- best of luck with your space antenna...

    Leave a comment:


  • sucahyo
    replied
    NickZ, I think you can use crude mathematic for that. circumference is 2*pi*r. If you intend to use 10 winding starting from 50 cm radius then:

    wire length needed = cone_height + 2*pi*(50+45+40+35+30+25+20+15+10+5)

    Those series of number taken from 50 divided by 10, so each smaller loop will decrease in 5cm.


    About jump start, wouldn't HV cap discharge of radiant circuit stronger?


    About mind power, it takes mind skill isn't it?


    I made bashar coil, I feel good around it but do not observe something other too.


    Vtech, thanks for the file .

    About the pendulum test, I think even an open coil or even straight wire has polarity. We don't need to power it. Isn't it natural that there always be imbalance between two end of wire? Perfect mass or size between two end of wire is impossible isn't it?

    I agree about aether interaction with coil collapse.

    Can you notice from what part you feel the energy? the coil or the magnet or the crystal?

    I think you feel the energy from crystal that absorb and reemit the energy from coil collapse current.

    Leave a comment:


  • blackchisel97
    replied
    Thanks Nick for including Daniel Pomerleau here. Quite controversial however, he did several demonstrations in public over few years. I know it is weird but I'm still open to this. I've seen enough weird to discredit him as a hoax just because I never had a chance to witness in person or talk to.

    I've made a coil based on Bashar idea. Nothing I can measure or see but similarly to the cones there is something around. My coils are about 12" assembled. Will run some ideas on it.

    @Sucahyo, about something I did and wonder if you would be interested to try it; I used a pendulum but doesn't have to be. If we agree that coil when energized has two poles separated by the Bloch wall and during collapse (disconnecting power source) coil re bounces (decompresses), thus allowing Aether to enter through widened zero - area, resulting in sharp, negative spike - do we agree so far? What I was thinking; oscillating coil due to the passing magnet (pendulum in my case) will cause compression and decompression of MF inside (There is no core).
    Now, we know what happens to the quartz crystal being stressed. It will respond. So, I placed crystal inside a core and ran a pendulum. It isn't easy to sense since I have a swinging neo but there is a different feeling around the device with and without a crystal. In both cases pleasant. I suppose it will make a difference adjusting period to certain value. With pendulum I can run from 1pps - 2pps. However, with 2, 3 or 4 poles on the rotor I could adjust to higher freq. such as 7 - 8Hz or even more.
    What do you think?


    Vtech

    Leave a comment:


  • NickZ
    replied
    Guys:
    Along the line of mind devices, similar possibly to the way the the pyramid mind device may work, I though that you may want to see this:
    Directoryaniel Pomerleau Free Energy Coils - PESWiki
    He says that you have to have faith in order for it to work.
    Non technological mind power?
    You've got to be out of your mind, but, function from the heart...

    Leave a comment:


  • spiralout
    replied
    Thanks for link NickZ, that's a real video!

    The guy posted another video showing there is no battery inside the bulb... cool stuff.
    YouTube - Radiant energy 2
    Maybe organic matter can somehow transform radiant/aether/orgone/prana/whatever energy into electricity...
    like in the case of Les Brown and the wool thread he used in his pyramid...

    cheers, spiralout.

    Leave a comment:


  • NickZ
    replied
    Guys:
    My sand-cement batteries are working but they won't light a Jt.
    They have enough voltage, but not enough current. I even took the resistor off of the Jtc, but still no cigar. Anyways two or three of them do light a couple of leds connected direct to the bulbs, but also seam to drop in voltage and get dimmer after a while. Next ones I'll use some baking power (not soda), and spiral the copper tube through itself, to see what happens... So far a 1/2 inch by 2.5 inch calculator solar cell puts out more power, than three of these can batteries. But not at night.
    @ Spiralout: I don't know what to think about the 800 volt Energy from the air video. He did mention that he would update more info soon.
    Here is a link. Let me know what you think. I like the way they light the incandescent bulbs with radiant power. Would love to be able to do that myself.
    YouTube - Radiant Energy
    There are more of his videos, you just have to look for them when you get to YouTube.

    Concerning the space antenna: I also think that Russel's inverted coils design were possibly working on the same principal. Which gives us more hope of getting some good results.
    I wonder how many feet of copper wire will it take to make the minimum size 2 foot high by 1.2 foot antenna coil? Insulated copper cable is not cheap now, so knowing the exact amount of feet needed would help keep the costs down. If AC is needed to jump start it, maybe an AC dimmer switch might help to lower the 120 volt wall outlet voltage, so it won't fry the connections at start up. Batteries are not AC, but who knows if that matters, probably. I love surprises, don't you?
    Thanks Bashar, I know you your listening in...
    Good day!

    Leave a comment:


  • blackchisel97
    replied
    There are links to my online library -



    Walter Russell - The Universal One.pdf

    And some more interesting reading.


    Vtech

    Leave a comment:


  • sucahyo
    replied
    Thanks for the page Vtech. The Russel way look interesting, do he mention how to tap it?

    Thanks for the info NickZ, I am thinking more to use the space time antenna as the coil instead of the charging target, it should has inductance isn't it? And if it provide resonant, then a bridge recovery of radiant circuit might capture it. Don't know if it provide longer ring that usual coil though.

    Congratulation on the cement battery .


    Crono, for energy source, psychic believe two source, from the earth and from the sky. They form different "grid".

    However, the method you mention use different method. Either:
    - an earth battery
    - an earth voltage potential capture

    Both are different because the first one is chemical and the second one is the physical effect of the above two source.

    Leave a comment:


  • spiralout
    replied
    Originally posted by NickZ View Post
    Bc: Thanks again for the support.
    I was watching Tomata's latest video on the Tesla Patent of drawing energy from the air by using a metal sheet 1 by 2 meters, placed 12 meters high and another sheet of 1 by 1 mt. buried in the ground. He has some amazing results. Suggest everyone check that out. 800 to 1000 volts radiant energy.
    Hi Nickz,

    Could you post a link to that video?

    @ all,

    Thank you for this thread, wish I could contribute something of value but at the
    moment it's just a big clutter of random ideas. keep up the good work .

    spiralout.

    Leave a comment:


  • NickZ
    replied
    The beach sand cement batteries will take a charge, of several volts, but, hardly any mAs. They seam to work better if charged first.
    If a bunch of cement batteries are connected in series, (100 of them), 120 volt will be obtained. Few watts, But,.... you don't need the sun.
    They can also be connected to a solar panel and will act as additional storage. I'm charging them off of a 12 volt dc wall adapter, for now.
    Try to charge them. Mine seam to hold the charge. I don't think that what is going on here is as simple as it looks. Once they are activated by charging them, it seams like juice just flows through them, to some degree.

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by NickZ View Post
    Bc:
    Thanks for the ideas. I am far from civilization, as well as any stores like Radio Stack etz.. The beach sand batteries do work, so I will improve the next ones by adding baking power, and making the copper wire spiral though itself and up. I think that will help. I'll let you know how it goes.
    Thanks again for the support.
    I was watching Tomata's latest video on the Tesla Patent of drawing energy from the air by using a metal sheet 1 by 2 meters, placed 12 meters high and another sheet of 1 by 1 mt. buried in the ground. He has some amazing results. Suggest everyone check that out. 800 to 1000 volts radiant energy.
    The Bashar's space- time antenna has also finally made it to this forum, great. I've also been counting on that one...
    Below is a picture of where I access my beach sand.
    I'm jealous Wish to be in such place. Check latest posts in Bedini Earth Light thread and idea of making semiconductor for those cells (and not only for those cells). I don't know if you had a chance to watch JB Energy From Vacuum 18 video as well as petrovoltaics. This is related to work of Russell and transmutation. I did one battery with baking soda. Strong during first couple weeks and now very weak.


    Vtech

    Leave a comment:

Working...
X