This forum is preserved as a permanent archive. The community continues at eMedia Press.

Announcement

Collapse
No announcement yet.

Pyramid

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NickZ
    replied
    Blackchisel and Sucahyo:
    I just finished watching both your videos on cement batteries, or crystal batteries. I can't wait to try it myself, just need to get some cement. I got plenty of beach sand just a few yards away. It is made of mostly quartz. There are many types and grades of beach sand also, and so some may work better than others.
    I was thinking of making a dozen can batteries to see it I can get around 12 volts. I wonder how they will further charge up if connected to a solar panel or wall adapter. As these cans make them look more like capacitors, than batteries. If this works using just beach sand and cement, people can make them in the areas where there is no electric power, or when one can't afford to pay for it. The nice part is that they can be connected in series (like a solar cells) to make the voltage you want, or the current needed, and any one can make them, even with no experience.

    I just got the biggest shock from one of my Joule thiefs, just now. I could not take the shock as it really hurts. The Jt only puts out about 15 volts, but must have some watts to it also. It's just a one inch toroid, with a 76 turns of 26 guage magnet wire, TIP3055 trans. The secondary wire (one wire) touched the under part of my arm, and shocked my whole body, as I was sweating and my arm had salt on it from the beach. Surprised that my device could shock the heck out of me, as it never happened like that before. Makes me think that maybe adding a bit more Salt might help to increase the voltage in the beach sand batteries.

    Leave a comment:


  • blackchisel97
    replied
    Yes, I have those and his first book. The company videotaping this event kept original material and never released again - if I remember well. Also, I read Less saying that his second book will "blow our mind" and it was related to the pyramid research, not just crystals. He also said that this first book was necessary as a introduction for better grasp of the second one. I tried to find this book but it was either never published or Less didn't finish writing.
    As far as Mythbusters I don't trust them since infamous presentation of John Bedini SG. They screwed up some many things with constructing this simple project and busting entire operation as a result. If 11 year old girl could do it following J.B instructions why couldn't they?? Perhaps producer got a call from MIT or the entire subject was picked to diss John Bedini work in this field. Is this a product of my imagination? John Bedini is familiar with this video and I'm sure he had a good laugh at it.
    Anyway, my point is that they aren't independent and they're getting well paid for their stuff. At the same time they do what they are told to do. Unlike most of us here
    I have a same question as you Nick, why there was no follow up, replication etc. Guy just took his years of work with him and left no notes??
    Maybe he did.
    As far as a capstone goes; that's another mystery. There was an earthquake (I think it was XIII century) which could loosen and cause to fall down. Most of the limestone has been looted as a building material for mosques. Maybe capstone vanished at the same time? There were smaller pyramids with capstones made from precious metals or at least covered with gold. For some reason I don't believe that Giza pyramid had such but maybe a different one? Such capstone would weigh 50 -70T depending on the material. Obviously, builders of the pyramid wouldn't have a problem putting it on the top. Maybe it was a crystal which was "on loan" and it has been retrieved....




    Vtech
    Last edited by blackchisel97; 03-08-2011, 11:59 PM. Reason: edit text

    Leave a comment:


  • NickZ
    replied
    The guy with the 30 foot pyramid is his back yard:
    YouTube - Harnesing Pyramid Energy by Les Brown
    I just found it. I couldn't find it before.
    There may be something to this...as I don't think that he is making up the story. But, why is there no follow up on any on this stuff. Makes me wonder.

    Leave a comment:


  • NickZ
    replied
    Guys:
    The guy that built the big 30 foot pyramid in his back yard, (I forget his name), gave up after he was electrocuted and thrown 20 feet. That sounds very fishy to me. Still he has been the only one that CLAIMS that the pyramid can produce ALOT of power. But, wheres the proof!
    He just walks away from it, and tears it down. Right! I would have to see it to belief it.
    Now, I can't even find his videos.
    As far some of the other experiments on pyramids are concerned, I think that you should also see this:
    YouTube - Mythbusters 3x14 Pyramid Power (2 of 2)

    Could the missing Capstone have really been a giant crystal, that can be activated to power the rest of the entire Giza pyramidal geomagnetic complex. Including some type of wireless lighting system.
    Something that important should have left some clues.What ever was going on, it was no small insignificant thing. But, their government is not showing or telling all they know.


    What is needed to tap energy from the Earths Vortex, draw in Aether and convert that to electricity? Looks like the capacitor is one of the main things. It creates the separation of charges. In order to use our present electrical appliances, we would need to separate the charges and further convert that to Ac.

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by sucahyo View Post
    I also observed that when three objects were set in a certain triangular form that interaction again took place with the individual energy lines disappearing and straight radial lines of energy coming away from the objects, but in this case it dowsed as being mainly beneficial.
    [B][COLOR="Purple"]
    So if we want male energy we put the coil in series, and if we want female energy we put the coil in golden mean triangle. Maybe we can create extreme polarity incorporating both.

    Maybe some coil in series at 2/3 height and some coil in golden ratio geometry at 1/6 height.
    Yes, certain shapes can interact with Aether better than others. Triangles will induce vortical response, spirals will amplify and guide, circles will draw energy from outside towards its center. Now, if we use a combination of those shapes.....

    Leave a comment:


  • sucahyo
    replied
    Just found something interesting regarding unhealthy black line with spring bed springs.
    Is your bed making you ill

    I had been puzzled by some of these black lines, which seemed to enter the bedroom, pass through the bed, then abruptly turn and exit the room, almost as if the bed itself was the attraction. Some lines seemed to prefer to come in across the foot of the bed, turn at right angles and run the length of the bed, as if tuning into a line of these springs.
    ...
    Incidentally, I have already mentioned that cats prefer to sleep on these black lines, particularly where the overgrounds focus into the spirals. Recently, I read that some cats can tell when their owner has had an accident or some other severe form of trauma, and refuse to lie in their usual sleeping places. Perhaps they use these black lines to "tune in" to their owners at a distance. Since spiral bedsprings attract the noxious energies from underground fissures (and streams), then a line of them must be an obvious method of warping them away from my bed space. I made a simple 6 inch spiral of light gauge fence wire, and found that not only did it divert the black line, it actually stopped it coming in to my bedroom in its tracks.
    Now that I recall it, my bed is spring bed, and my cemenite that I currently use to help sleep contain a bunch of coil in random position .......And now my families who used to sleep easier at sponge bed now also sleep easier at spring bed....


    My intention to post this is the possibility of using simple geometry to attract energy. Something like explained in:
    THE GOLDEN MEAN AND THREE BRICKS
    Some time ago I observed that when three objects were placed in positions relative to each other that the individual energy fields of the objects interacted 'in various ways. When placed in alignment and at certain distances apart the three circular fields disappeared and instead a straight line of energy was formed with radial lines going away from each object. The energy dowsed in these lines is mainly detrimental in nature.

    I also observed that when three objects were set in a certain triangular form that interaction again took place with the individual energy lines disappearing and straight radial lines of energy coming away from the objects, but in this case it dowsed as being mainly beneficial.
    So if we want male energy we put the coil in series, and if we want female energy we put the coil in golden mean triangle. Maybe we can create extreme polarity incorporating both.

    Maybe some coil in series at 2/3 height and some coil in golden ratio geometry at 1/6 height.
    Last edited by sucahyo; 03-08-2011, 08:44 AM.

    Leave a comment:


  • sucahyo
    replied
    Originally posted by blackchisel97 View Post
    I was thinking about that but came across W. Reich note saying that any more than three layer orac should not be used by inexperienced people. Also, I should clarify what I said about metals; they absorb energy at first but release and reflect. Not sure if we actually need a multilayer pyramid. I'm waiting for some copper sheets. As soon as they arrive I'll be making one or two and run some tests. This theorizing only(mine) and looking for answers gives me headache
    lol. I think you should try. Especially since you can detect/see energy.

    Adding layer said to absorb energy around your house, including the bad one. But isn't your pyramid doing the same thing and you already solve it?


    Originally posted by blackchisel97 View Post
    I kept thinking about spirals, ferns, fiddleheads (plants), nautilus etc. You know where I'm heading My question was WHY this is happening? Also, many of those great designs were used throughout centuries in various man made structures (Did a man stood behind a drafting board and designed each and everyone of them? - I doubt) Was this just an admiration or fascination or there was actually a purpose? We know the answer don't we

    I know and did various experiments based on the resonance. This can be very powerful effect but also, when done on very subtle level allows to interact while using even more subtle energy. I was going through fact such as estimated weight, Pi, Phi, location etc. of Great Pyramid and I believe it was designed to resonate with Aether, just like everything as we know it. Certain shapes such as spirals, cones but also 2D can "disturb" Aether and cause to flow or create 3D forms as a response. I think what we need is to find a way to create interaction within local Aether/Orgon/Zero Point Energy (whichever name we want to use it) field but in certain way so Aether will respond creating vortical flow/motion and we need to guide it onto desired path. Spirals are good, maybe conical spirals are better? Aether naturally travels on curves not a straight lines.
    I come accross something simple today, called "moody coil" It is just one loop of coil that can make plants many meters away to be affected too.

    And then a way to neutralize "dirty electricity" with just few turn of insulated wire and then short it. Read Frank Moody article bellow:
    October 2004

    Originally posted by blackchisel97 View Post
    I was thinking of employing them to magnify energy for the purpose of measuring eventual electrical potential, not for health related purposes.
    I read there are health problem with magnet. But some people who use magnet do observe change of energy flow with magnet. They use stack of 10 neo.

    Originally posted by blackchisel97 View Post
    Cannot afford atm.
    I think even electroscope should give some reading. I'm going through John Keely and Dr.Wilhelm Reich notes, research. Looking for more clues. I found some interesting things, probably known but I'll try to summarize them all and see if we can draw some conclusions - hints.
    For electroscope, here is how the Correas use it:
    we do likewise with electroscopes - not just measuring the leakage rates of negatively charged electroscopes, but also the seepage rates of positively charged ones; and not just inside the accumulators, but also outside of them. We also employ identical pairs of such electroscopes to study atmospheric conditions in order to isolate the heretofore unstudied and undocumented midday phenomenon that bring about the arrest of both leakage and seepage.

    ...
    The electroscopic anomaly consists in the fact that charged electroscopes discharge more slowly inside an ORAC than outside of it. As we came to discover, this slowing down of the electroscopic discharge occurs independently from the polarity of the charged electroscope and often reaches complete arrest of the discharge.

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by sucahyo View Post
    I wonder what happen if we wrap the outer side with paper. Orac - pyramid....I was thinking about that but came across W. Reich note saying that any more than three layer orac should not be used by inexperienced people. Also, I should clarify what I said about metals; they absorb energy at first but release and reflect. Not sure if we actually need a multilayer pyramid. I'm waiting for some copper sheets. As soon as they arrive I'll be making one or two and run some tests. This theorizing only(mine) and looking for answers gives me headache

    Any idea for CW or CCW winding?

    Not yet


    I highly believe flat spiral coil will polarize energy, based from freezing them on ice test.
    Yes, I agree. Pyramid collect more energy if exposed with sun light or moon light.


    I kept thinking about spirals, ferns, fiddleheads (plants), nautilus etc. You know where I'm heading My question was WHY this is happening? Also, many of those great designs were used throughout centuries in various man made structures (Did a man stood behind a drafting board and designed each and everyone of them? - I doubt) Was this just an admiration or fascination or there was actually a purpose? We know the answer don't we

    I know and did various experiments based on the resonance. This can be very powerful effect but also, when done on very subtle level allows to interact while using even more subtle energy. I was going through fact such as estimated weight, Pi, Phi, location etc. of Great Pyramid and I believe it was designed to resonate with Aether, just like everything as we know it. Certain shapes such as spirals, cones but also 2D can "disturb" Aether and cause to flow or create 3D forms as a response. I think what we need is to find a way to create interaction within local Aether/Orgon/Zero Point Energy (whichever name we want to use it) field but in certain way so Aether will respond creating vortical flow/motion and we need to guide it onto desired path. Spirals are good, maybe conical spirals are better? Aether naturally travels on curves not a straight lines.


    I think neo is not good too. People from different community report some bad effect of neo magnet if placed on device that manipulate aether. I was thinking of employing them to magnify energy for the purpose of measuring eventual electrical potential, not for health related purposes. I think crystal can replace neo, and I believe flat spiral coil too or SBB coil: Yes, crystals may be even more powerful as long as their placement is correct.


    From my experiment, I conclude that that coil above will emit male energy to viewer direction, to you.

    I found alumunium produce male energy which currently not what I need.

    Good luck with the test .

    How about this meter:
    Experiments with the Life-Energy Field Meter Cannot afford atm.
    I think even electroscope should give some reading. I'm going through John Keely and Dr.Wilhelm Reich notes, research. Looking for more clues. I found some interesting things, probably known but I'll try to summarize them all and see if we can draw some conclusions - hints.

    Vtech

    Leave a comment:


  • sucahyo
    replied
    Originally posted by blackchisel97 View Post
    Also, metals reflect energy while dielectric materials absorb. When sandwiched between conductive layers they may become an electret.
    I wonder what happen if we wrap the outer side with paper. Orac - pyramid....


    Originally posted by blackchisel97 View Post
    I think we need two coils (conical) one starting under the apex, inside and other from the bottom. They should look like hour glass when being observed through the side. What I suspect is a double vortex. We will need another coil placed in king chamber, wound on toroid or ring. Two windings, 90deg from each other.
    Any idea for CW or CCW winding?



    Originally posted by NickZ View Post
    Maybe after a while ones body can get used to any negative effects from a pyramids, and possibly even get to like it. Like alcohol, or drugs.
    Are you addicted now ?

    Originally posted by NickZ View Post
    And also how to separate the polarities,
    I highly believe flat spiral coil will polarize energy, based from freezing them on ice test.

    Originally posted by NickZ View Post
    Pyramids only focuses the energy, but don't produce it. Just like sunlight going through a magnifier lens. Pyramid is a like a vortexial lens...
    Yes, I agree. Pyramid collect more energy if exposed with sun light or moon light.

    Originally posted by NickZ View Post
    Sucahyo- The Greys and others, have been giving information and have been working in conjunction with the Black World Government that are really in charge, of this planet for years. In exchange for what? Us? How many of us are missing, especially kids. How many tens of thousands of cattle mutilations, abductions, etz.
    That could be. Never heard grey channeller give exact easy to build FE device and share it to everyone. Only hint. Maybe because they sacrifice too much.

    Originally posted by NickZ View Post
    We are also being electronically interfered with, by earthbound and Satellite mind control interference devices. To keep us ignorant, and lacking, in fear, and under control. Those that don't believe it, is because it Works.
    Reducing intereference is the purposes of my experiment .

    Originally posted by blackchisel97 View Post
    I think just a copper will do. Aluminum is not good for some reason.. Perhaps placing neo magnets on each side, aligned with Earth MF and aligned so they are in attractive mode inside the pyramid may amplify the effect
    I'm trying to get some copper sheets without abusing my budget. I need to test some of those thoughts.
    I think neo is not good too. People from different community report some bad effect of neo magnet if placed on device that manipulate aether. I think crystal can replace neo, and I believe flat spiral coil too or SBB coil:


    From my experiment, I conclude that that coil above will emit male energy to viewer direction, to you.

    I found alumunium produce male energy which currently not what I need.

    Good luck with the test .

    Originally posted by NickZ View Post
    Blackchisel:
    Although I know what you mean by measurable by a Radio Shack meter, It may take another type of meter that has not been invented yet.
    How about this meter:
    Experiments with the Life-Energy Field Meter

    Ashtweth is testing it now.
    Last edited by sucahyo; 03-08-2011, 03:43 AM.

    Leave a comment:


  • NickZ
    replied
    Blackchisel:
    Although I know what you mean by measurable by a Radio Shack meter, It may take another type of meter that has not been invented yet.
    A Black Matter meter, of sorts, to measure that.
    I think the source energy that is coming off of the pyramid is not electrical, magnetic, gravitational, or anything else that we can even shake a stick at. You can't see it, but you can feel it, like you feel the wind. At least I can. It's the stuff that everything is made from, Aether. It has no weight, takes no space, and it can't be measure by conventional meters. But, it exists... and yes sensitive people can detect it, as they can also see the energy coming off of a horseshoe magnet at night.
    The trick is to be able to convert it to a usable form, that will do work. Similar to how capacitors can convert Aether to electricity, or how solar panels can convert sunlight (so called). As sunlight also does not come from the sun, at all, but is produced here by the Earth's Vortex, in the planets atmosphere, on the side facing the sun.

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by NickZ View Post
    Blackchisel- you mentioned about the open frame pyramid having an undetectable energy field. It is detectable but not by everyone. We need to tap it so it can be measured by meters from Radio Shack, not just seen by sensitive people.
    The basic question remains: How to tap Aether or Vortex energy? And also how to separate the polarities. I think that the difference in potentials may be the key. Pyramid is a like a vortexial lens...I think that when we synchronize pyramid itself and whatever coil arrangements it is going to be with Earth's field than polarity will manifest on its own.

    Blackchisel- the 4 triangles of laminated metals and bismuth etz.. may work. Easier to do a test on a small version first. Possibly could work similar to a capacitor effect.
    I think just a copper will do. Aluminum is not good for some reason.. Perhaps placing neo magnets on each side, aligned with Earth MF and aligned so they are in attractive mode inside the pyramid may amplify the effect
    I'm trying to get some copper sheets without abusing my budget. I need to test some of those thoughts.


    Vtech

    Leave a comment:


  • NickZ
    replied
    @ Sucahyo and Blackchisel, and robur:

    Maybe after a while ones body can get used to any negative effects from a pyramids, and possibly even get to like it. Like alcohol, or drugs.
    Blackchisel- you mentioned about the open frame pyramid having an undetectable energy field. Yes, but it is present there, all the same.
    The basic question remains: How to tap Aether or Vortex energy? And also how to separate the polarities, If that is important. I think that the difference in potentials may be the key, or it's going to be just Voltage , (and Fluff), doesn't do any real work, as we have seen up to now. Lightning produced by thunderheads is not made of just voltage, it can blow a building to pieces.
    We may not need to limit ourselves on just what kind of energy form to use (pyramid, dome, sphere etz), but instead focus first on tapping Vortex powered Aether Energy, that is surrounding us all the time. Then incorporate that knowledge into a pyramid shape, dome, or, whatever shape may help to focus the energy and make it more practical or easier to tap...
    Pyramids only focuses the energy, but don't produce it. Just like sunlight going through a magnifier lens. Pyramid is a like a vortexial lens...

    Blackchisel- the 4 triangles of laminated metals and bismuth etz.. may work. Easier to do a test on a small version first. Possibly could work similar to a capacitor effect. Separating the polarities and providing usable electricity.
    I'll be making some Cement Batteries real soon using nothing but beach sand and cement. As I have plenty of that around. Lots of empty beer cans (unfortunately), and copper tubing also.

    Sucahyo- The Greys and others, have been giving information and have been working in conjunction with the Black World Government that are really in charge, of this planet for years. In exchange for what? Us? How many of us are missing, especially kids. How many tens of thousands of cattle mutilations, abductions, etz.
    Do they really need us? Apparently so.
    NASA is a public front... there's a lot more going on. According to some, there are over 1000 underground bases (like Dulce, New Mexico) on just this planet alone. And bases on Mars, the Moon, the the rest of the planets. We are not being told any of it. What is on the dark side of the moon that they don't want us to know about? Why does the moon not turn like most other moons revolving around their planets. Is it an artificial moon? Is it swarming with ETs like is being shown in the different space videos on Youtube? Is that why we have not been back to the moon in over 40 years. They kicked us out?
    NASA has known all along that we are not alone.
    ETs already know how to produce all types of power, but are not telling, yet. Nice huh?


    We are also being electronically interfered with, by earthbound and Satellite mind control interference devices. To keep us ignorant, and lacking, in fear, and under control. Those that don't believe it, is because it Works.
    Just try to leave this planet (for the last several thousands of years), You can't... but They can, and can also do a lot more than just producing electric power.
    We ask for help to free ourselves from the oppressive grasps of electric power and oil companies, that we are now willing slaves to. But, will our prayers be heard, and answered?

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by sucahyo View Post
    Thanks for document spodie. I believe the water dissociation thing. I have seen bubble formation in an ice, only at one side .

    NickZ, I think it is fortunate that you live at the right side of the mountain. My parents home is at the heat side at the mountain that on rainy season the mountain block the rain and only transfer the hot wind. It produce "gending wind" which can make you sick and produce special quality to plants that Probolinggo is known to produce world class grape, mango and tobacco.

    I don't think grey will give information to easily.

    For voltmeter probe, try 2/3 height for positive, 1/6 height for negative. Maybe we need to place flat spiral coil in the 2/3 height too and lift the pyramid from the ground with rubber or plastic, not wood.
    I think plastic/acrylic may separate better from the ground and help to collect/generate charge. I also believe that we'll have to use copper sheets or foil as outer layer if we want to measure something. Probably double sided pcb board will suffice. Shape only - such as Nick's pyramid made of copper pipes will demonstrate its energy and it will be detected by sensitive person but not measurable by conventional meters. I have made a small one lined with foil on the inside and it transforms/generates energy. Each triangle (side) has ability to collect a charge and move towards the apex in vortice. This creates disturbance in local aether and causes aether to flow - interact with pyramid. Also, metals reflect energy while dielectric materials absorb. When sandwiched between conductive layers they may become an electret.
    I think we need two coils (conical) one starting under the apex, inside and other from the bottom. They should look like hour glass when being observed through the side. What I suspect is a double vortex. We will need another coil placed in king chamber, wound on toroid or ring. Two windings, 90deg from each other. I'm still working my minds around that. Those are just rough thoughts.


    Vtech

    Leave a comment:


  • sucahyo
    replied
    Use of pyramid


    First of all here are some of the things a pyramid is suppose to do:
    - Sharpen razor blades
    - Restore the lustre to tarnished jewellery and coins
    - Purify water
    - Mummify and dehydrate meat, eggs and other food stuffs
    - Help keep milk fresh and prevent souring without refrigeration
    - Dehydrate flowers without losing their form or colour
    - Increase the growth rate of plants
    - Help attain increased relaxation
    - Improves the taste of coffee, wine and certain fruit juices
    - Promotes healing of cuts, bruises and burns, as well as reduces pain from toothaches and headaches.

    But with precation. it seems the article use male energy side:
    There are several important things to keep in mind when experimenting with Pyramids. First, the object you are treating should NOT exceed 5% of the pyramid's volume. Other-wise the energy is spread to thin, and not much happens. The exception is when sitting or sleeping under a pyramid. For this, a pyramid with a 6 ft base (or larger) works good. Second, and this is really critical, the pyramid MUST be aligned to magnetic north to work! The energy is very weak when it is out of alignment, so you want to get it aligned as good as possible. It will still work if it is a little out.
    Also if you are using it to boost your plant's growth you do need to be careful. Just as too much fertilizer is bad for plants, too much orgone is too. Some plants don't mind it, but others can't take a lot. If a plant is getting too much it will start to wilt. There are several ways to regulate the energy. The best way to prevent over-dose on plants is to treat water with Pyramids and water them with the pyramid water. You can't over dose them doing that. Humans can over-dose too. If you have been under a pyramid too long you can start to get a head-ache, if you still stay it becomes nausea and light headed. If you still refuse to leave, it will pass and one feels quite good. So there don't seem to be any damaging effects (you fingers don't shrivel up!), but I wouldn't recommend staying under to long if it causes discomfort.

    Leave a comment:


  • sucahyo
    replied
    Thanks for document spodie. I believe the water dissociation thing. I have seen bubble formation in an ice, only at one side .

    NickZ, I think it is fortunate that you live at the right side of the mountain. My parents home is at the heat side at the mountain that on rainy season the mountain block the rain and only transfer the hot wind. It produce "gending wind" which can make you sick and produce special quality to plants that Probolinggo is known to produce world class grape, mango and tobacco.

    I don't think grey will give information to easily.

    For voltmeter probe, try 2/3 height for positive, 1/6 height for negative. Maybe we need to place flat spiral coil in the 2/3 height too and lift the pyramid from the ground with rubber or plastic, not wood.

    Leave a comment:

Working...
X