gravity waves found

[david lambright]

indy boys!

David,

Are you saying that the aluminum tube/iron oxide ring gap closes and stays shut when you spark it with the battery?

The replication I created does not. Best I could find to replicate this is a 1/2" OD ribbed flexible gas line tubing with 1/4" ID and stuffed it with iron oxide. Tamped it in there real tight. Closed the ends off with a layer of plastic bag and a layer of masking tape. Have 20 turns of insulated wire wrapped around tube and spark it with a 18 volt battery. Also pulled the ends together and taped them connected and at various distances. Did not notice any ends staying held closed. Reversed the polarity many times and sparked as well.

Can you share a picture of your aluminum ring?
What is the wire size and where is it located?
As many details as you can provide will assist those wanting to replicate this.

Thanks,

IndianaBoys

thanks for your interest!..what you should have is a tube bent into a circle, filled with the oxide, the ends butted tightly together, with no gap, toroid style...after you energize it, hold it at arms length and slowly rotate it, you will see it...sometimes it takes a minute to get your eyes adjusted, kindof like those weird 3D posters, but it looks like a mirage, but it is subtle... i will post some photos ASAP....david......also i have made a larger model, made from a dip net, for fishing...it is aprox.1/2" OD and 12" in diameter,...the tube the net attaches to, it is almost a circle already...i have another one with 3/8" copper tube, 11" diameter, but the aluminum seems to work better....[url=http://www.sciencedaily.com/]Science Daily: News & Articles in Science, Health, October 12, 2009...scientists measure persistent energy flow ....i could not get the link to work...or see http://www.energeticforum.com/renewable-energy/3969-perpetual-motion-holder-edward-leedskalnin.html#post106699...david...let me know if that helps.....thanks

[IndianaBoys]

this is interesting...http://www.sciencedaily.com/...david..... i am talking about the aluminum & iron oxide rings....the tubing is cheap, the oxide is cheap, and the wire is off of a used transformer that was lying around, so any one trying to replicate this should have no problems...a lot easier than trying to build the other device, [rotor/generator].....david

David,

Are you saying that the aluminum tube/iron oxide ring gap closes and stays shut when you spark it with the battery?

The replication I created does not. Best I could find to replicate this is a 1/2" OD ribbed flexible gas line tubing with 1/4" ID and stuffed it with iron oxide. Tamped it in there real tight. Closed the ends off with a layer of plastic bag and a layer of masking tape. Have 20 turns of insulated wire wrapped around tube and spark it with a 18 volt battery. Also pulled the ends together and taped them connected and at various distances. Did not notice any ends staying held closed. Reversed the polarity many times and sparked as well.

Can you share a picture of your aluminum ring?
What is the wire size and where is it located?
As many details as you can provide will assist those wanting to replicate this.

Thanks,

IndianaBoys

[IndianaBoys]

this is interesting...http://www.sciencedaily.com/...david.....

David,

The link is not working.

The page you are looking for may have moved or is currently under construction. You can start at our home page or use our search engine to look for a recent science news story. Just type in a keyword in the field below and press the Search button.

IndianaBoys

[CatLady]

there is a PM with matts info for you ...could you forward it to bruce?...thanks, david

I was out of town yesterday but I forwarded the address out first thing this morning. I did ask Bruce to let us know when it gets sent. Hope it does get out Friday or before. Then Matt should have it next week.


TruthBeKnown

[david lambright]

fluid core?

i am going to make another ring with a ferro fluid core...it might be a bit messy to get the tube full, but earlier tests show that ferro fluid will complete a PMH circuit...i will post my results soon...i must say thanks again to everyone who takes time to read and contemplate these ideas and especially to all who take the time to replicate...i cannot verbally convey my thanks enough ....david

[david lambright]

hi everyone...

this is interesting...http://www.sciencedaily.com/...david.....i think that my device is making this same persistent energy but with my device, the energy is now visible so that it can be studied more easily...as far as i can tell, the energy is of a radiant type, with only a small voltage to start, but will continue to flow indefinitely...if i take two of these rings and hold them about a foot apart, i can see a flow from one to the other, i am talking about the aluminum & iron oxide rings....the tubing is cheap, the oxide is cheap, and the wire is off of a used transformer that was lying around, so any one trying to replicate this should have no problems...a lot easier than trying to build the other device, [rotor/generator].....david

[david lambright]

cat!

there is a PM with matts info for you ...could you forward it to bruce?...thanks, david

[david lambright]

hi everyone...

jet...i am still waiting for matts reply...it wont be much longer OK....david

[Freemen]

Gravitational Field

Leedskalnin had his magnet poles arranged in NNSSNNSSNNSS config where each N was forced against another N and each S was forced against another S. This configuration creates scalar magnetic poles (whatever this means), but maybe in conjunction with the magnetic currents that run throughout

This have analogy to do with coupling two magnetic field (4:04 timelime)

[Jetijs]

Hi David!
Are you saying that you have sent out the device? That would be great as I am currently stuck with this project. Someone from my local physics institute suggested that a certain grade of tool steel has the magnetic properties I need for my test. So I finally got a sheet of this material and magnetized a small piece of it, but it does not retain magnetism as the tool steel from which drill bits are made does. So that is depressing. I gave a theory, that we in fact need those separate V pieces and not a whole laser cut disc. I remember seeing a video on youtube where a retired military man told about some tests with magnets he made long ago. He had two sets of magnets, he glued one set of two magnets together in attraction mode and the other set of two magnets in repelling mode. He then dropped both sets from a high building simultaneously and observed which one would fall quicker. The magnet set in repelling mode was always falling slower, so I guess it has to do something with gravity, because the mass and the shape of both sets was identical. Someone said, that when two opposing magnetic fields are forced together, a scalar field is formed and it has some interesting properties. So, maybe this is why Leedskalnin had his magnet poles arranged in NNSSNNSSNNSS config where each N was forced against another N and each S was forced against another S. This configuration creates scalar magnetic poles (whatever this means), but maybe in conjunction with the magnetic currents that run throughout all the rig when the pieces are locked together, a new kind of PMH is created, one that locks through air itself and this is what's causing the heat wave. I don't know, just a theory. That is why I would like to try to get a sheet of tool steel so that I can laser cut V shapes out of it and magnetize them so that each segment works like a ordinary U shaped magnet. Then I would like to try fixhing them together like in Eds wheel with opposing poles and then energize the rig like David shows us. Could be very interesting
Thanks,
Jetijs

[david lambright]

jet!

well...we are back on track!...i was reading some previous posts and it is true, we are still at a "hearsay" point...i hope that when you get the device to test, that you show it to as many people as would like to see something new under the sun...you will not be disappointed ...so it will still be a while before you get #2 to test....jet i must say i am excited and wish i could be there at the "moment" that you finally see this effect.....i will stay in touch....thanks again for your excellent effort and believing ...david

[david lambright]

hi everyone...

i emailed matt and will be getting the address shortly ...thanks cat for your help....david

[CatLady]

Good News!

Hey guys and gals, I just got an e-mail from Bruce-TPU. ( David I just sent you a personal e-mail ).

He said he and his family are fine. Between the move, things getting packed in different places, taking a family vacation, and starting a new job the timing has been off for things. So he asked for the next address to send it on and he hoped by this Friday he can do that. So I asked David to send the next address to Bruce ( or I will send the address for David if he doesn't have an active account at overunity.com ). Bruce said he lost the address he was given so he needs it again. So hopefully David will read this tonight and we can get his rig sent to the next person.....


TheTruthBeKnown

[david lambright]

this may help...

an experiment; i took a piece of 1/4 OD aluminum tubing, 28cm long and bent into a circle so that the ends are flush....then i filled the tube with iron oxide powder, packed in as much as i could, then taped the ends together...so i ended up with a 9cm circle...i then wound about 20 winds of insulated wire around the aluminum tube....i then energized the ring with a 9.6 volt makita battery, alternating pos and neg a few times....now i can see a filmy type of lens when i look through it...this might be easier to see, plus its inexpensive and easy to do...i have shown a few people and so far everyone sees this too....good luck...david

[Freemen]

People, give a break for the guy, he saw something that is unsual and need to take a close look at. "It is up to us to serve as midwives and get the infant born" T. E. Bearden