gravity waves found

[broli]

I'm not saying you should quit, I trust that you and others see something. The problem is going beyond that. Replicators pretty much all failed so the progress if any is only centered around you now. Which in itself is not a smart thing as it makes you too exposed. If you don't have the testing equipment just ask a local university for some lab space, just don't be "too crazy" with explaining what it should be as it's a university after all.

[Harvey]

I think once you get your photo ready rig done and get Glen to film it and put it up on a live feed that will help out quite a bit.

[david lambright]

broli...

you are so right, there really has not been any progress, the videos are crummy, results from duplicators are few and far between...this "glimmer" effect does not show up well on video, i still have not had access to real testing equipment to provide you all with tangible evidence that my device does something...then i provide a forum member with a working duplicate, and POOF, he vanishes???....at least he said he saw something before vanishing, still no tangible evidence...so sorry to everyone who has been following this thread, only because progress is slow, but this i must say again.... the glimmer effect is real, the gravitational effects are difficult to measure, but can be felt....i can not give up, this is too important to not explore fully....if you were to see my device in person you too would see and know why i am so persistent and passionate about my device....and lastly, for me, it is not about money or having some effect named after me, it is all about the technology that will arise once this energy is proven to work....that is precisely why i chose an open source forum to disclose my work.....i believe that because this energy is visible, that we can now see things about zero point energy that we could not see before....i have seen vortices of this glimmer effect that are very powerful....bruce, i hope whoever has my device now will disclose their findings soon...you know what i am talking about......david

[IndianaBoys]

David has provided a topic that has been an education in many areas that I had not traveled and in some regards could be compared to no longer sailing around a flat planet. So David, continue sailing the ship in the direction you choose as I am sure many look forward to this thread and the new land to be discovered.

Indianaboys
YouTube - ‪Talk Like a Pirate Day: The Five A's‬‎

[broli]

David, before you celebrate your 50's page I could have sworn that the first post of this thread was made yesterday. There doesn't seem to be made any progress. Just my honest observation.

[david lambright]

hi everyone...

freemen...thanks for all your insight!...anyway, while watching the hutchinson video, i noticed that there were the same type of distortions that i describe seeing around my device...i know some people will say it is a product of the camera etc., but i know what i see and it looks the same...i also believe that if someone were to talk with john, he would describe the same type of glimmer or heat type waves present during some of his videos...i have seen it in other videos as well, not just hutchinsons stuff...i will try and mark the time and where in the videos i am seeing these distortions.....david

[Freemen]

Antigravity

I thought I could mislead the discussion refering to levitating "stone", though this phenonema was reported and witnessed by people when visiting Tibete in XIX century.


However, you could find interesting gravitational effects in John Hutchison Lab seeing this video
YouTube - ‪Tesla The Race to Zero Point Free Energy‬‎

[sucahyo]

Secret of levitation in India (How yogi levitates in the air).GB

That show levitation as chair trick. But how it can explain body weight reducing act usually performed by shaolin student.

You can find Jet Lee performing very high jumping ability on interview.

However I think this is off topic because what being discussed in this thread is how to observe effect on a device, not on people.

[gravityblock]

May this could be of interest of this discussion Stone Levitation By Tibetan Monks

I think too is pertinent cite the bible passage of Jericho Battle in Joshua book Battle of Jericho - Wikipedia, the free encyclopedia (resonance phenomenon)

Secret of levitation in India (How yogi levitates in the air).

GB

[Freemen]

Tibetan Experiment

May this could be of interest of this discussion Stone Levitation By Tibetan Monks

I think too is pertinent cite the bible passage of Jericho Battle in Joshua book Battle of Jericho - Wikipedia, the free encyclopedia (resonance phenomenon)

[Harvey]

i was just checking something out on my device and noticed that on the inside, my compass points N to the segments, all the way around, but the outside seems to show N and S pole activity?...quartz crystal seems to generate the glimmer effect best...the crystal seems to absorb this energy and store it much the same way an object is heated then emits the absorbed heat....the crystal stores the energy and releases it slowly....the energy radiates from the crystal and looks like a heatwave but no heat....just the wave......david

Hi David,

Could it be that the spindle is magnetized 'S' from when it was a motor so that the S needle points to the center? Perhaps remove it from the sander housing and see if it reacts the same

Each element should have a N and a S pole because this is how the lock is established - but that flux should be contained internally unless it is leaking at a loose connection somewhere.

Most compasses have a very small magnet situated on the N needle or the entire needle is magnetized. This could induce a permeable material to adopt a pole. But it is more likely that the elements have become magnetized themselves to a small degree and this attracts the needle. Recall how my triplet elements became magnetized? And they were different in various areas on there surfaces.

[sucahyo]

i was just checking something out on my device and noticed that on the inside, my compass points N to the segments, all the way around, but the outside seems to show N and S pole activity?...quartz crystal seems to generate the glimmer effect best...the crystal seems to absorb this energy and store it much the same way an object is heated then emits the absorbed heat....the crystal stores the energy and releases it slowly....the energy radiates from the crystal and looks like a heatwave but no heat....just the wave......david

Might as well test orgonite. Some mention that crystal perform much stronger inside an orgonite. Jetijs can test this I think. Or may already tried.

[david lambright]

hi...

i was just checking something out on my device and noticed that on the inside, my compass points N to the segments, all the way around, but the outside seems to show N and S pole activity?...quartz crystal seems to generate the glimmer effect best...the crystal seems to absorb this energy and store it much the same way an object is heated then emits the absorbed heat....the crystal stores the energy and releases it slowly....the energy radiates from the crystal and looks like a heatwave but no heat....just the wave......david

[Harvey]

Hi David
I have tried it with aluminum foil and pieces from aluminum soda cans, both work fine. But the thinner the material the less weight it has and the attraction to magnets can be seen better. I have also tried the experiment with copper foil. It sure gets magnetic, but due to its weight, it a magnet can not lift it, the magnetic attraction is just too weak. I mean it is just as strong as on aluminum pieces, but the copper is simply much heavier. I can only lift one side of a small copper foil piece, but not the whole thing Have not tried other metals as I don't have them in thin sheets.
Thanks,
Jetijs

Thinking out loud here. . . the gap between two attracted magnets does not change the quantity of flux density samples at the surface of each magnet. Therefore, it can be expected, that as long as the flux from one enters the other, then the flux density will be relatively constant between them except for a small bulge at midpoint where the two fields cancel and the flux spreads out a bit. This would seem to imply, that a fair thickness of material can be structured this way without a loss of effect compared to a thinner piece.

Now let us suppose we have a piece of material that is the same size as our magnetic pole faces as far as area is concerned. And now let us consider that we place that in the gap between two very strong magnets that are PMH arranged (complete loop). And finally, let us suppose that gap is 1/2 the diameter of the pole sections. So, if we have 1" pole diameters, we have a 1/2" gap with a 1/2" thick x 1" diameter copper disc pinched between and pressurized by the MMF.

Finally, spread the magnets apart to 9/16" so the gap is 1/32" larger than the disc on each surface - an air gap so to speak.

What will the copper disc do? The flux is the same, maybe bulged very little in the middle, but still the same. Will the attraction now be sufficient to support the weight of the copper? Because the flux remains in tact, will it act like support strands running through the material? We already know that Lenz law will tend to keep it suspended, but this is a new configuration - can it stay that way indefinitely?

Interesting stuff.

[Jetijs]

Hi David
I have tried it with aluminum foil and pieces from aluminum soda cans, both work fine. But the thinner the material the less weight it has and the attraction to magnets can be seen better. I have also tried the experiment with copper foil. It sure gets magnetic, but due to its weight, it a magnet can not lift it, the magnetic attraction is just too weak. I mean it is just as strong as on aluminum pieces, but the copper is simply much heavier. I can only lift one side of a small copper foil piece, but not the whole thing Have not tried other metals as I don't have them in thin sheets.
Thanks,
Jetijs