gravity waves found

[woopy]

Hi All

great work here

@ Harvey

please could you repost a better pix of your device once completely iced. The previous pix do not clearly show the depression in the center. I know that it is difficult to show the variation of form on ice, but try, it would be very helpfull.

and please can you make a new video with the cam fixed above the device without moving. So perhaps we could learn to see the subtility that David try to teach us. Thank's

@ Jetijs

Did you already made some test ?

As for me i go on in icing test. So far it is the only mean i have found to see something in this radiation waves. But there is no doubt that the assymetry is there. This morning i asked my daughter to let her hands on a completely iced pmh. And estonishly she sayd that the "heat spot was where there was less thickness of ice ?? " So a question does the pmh Compress the water icing process on one side and depress on the other ??

And the question is why ? Any idea ?

Have some more icing this night. We will see tomorrow

Good luck at all

Laurent

[david lambright]

hi everyone...

jet, did your mail come?...jesus at OU was having a hard time seeing the radiation, but he did start to see it, finally!..do not be discouraged if you do not see it right away....remember what bruce said....very very subtle.....this is a little frustrating for me but like i said before, if this were easy to see/detect, it would have been discovered long ago....so far i have not seen any good photos of this effect, only good descriptions,fortunately from Tesla and other researchers, that lends a little credibility to what i am describing and trying to capture with imaging devices....these distorted "fields" around my devices, seem to be present around high energy/high magnetic fields and seem to be variable...i would still like to use some type of FLIR imager, to see if that might capture it better....these effects are real...the visual/gravitational anomalies are not imagined....similar effects have been seen/documented by some of the biggest names in this field...i know we are getting close...elusive? HA! frustrating? double HA!but i know what i have seen/felt...i have shown my devices to over 50 individuals who verify my findings....this is all very new to me...i am trying my best to help others to experience what i have, so that other researchers may find the root of these effects....how does one go about describing something they have never seen before?....if it were easy, i would not talking about it right now, it would already be old news......thanks for your help, even taking the time to read these threads, helps...i am not really that smart, i never went to college, i do not hold any degrees, i got my GED while in prison!....this i do know, i have seen/rediscovered something important....i have created it without the high voltage/magnetism that is normally associated with these distortions/anomalies....these effects are very subtle right now but most of what i am doing is still very crude, but i am moving forward in my progress.....david

[Jetijs]

Hi Loadstone,
have you tried to lock the pieces using an electric impulse through the coils?

[Loadstone]

Hi all.
I can't see anything in the ice pics , but I would suggest to freeze your PMH's with the N pole prong East and S pole prong West...if possible.

I've put together a ring of Vee magnets in a NS..NS fashion, but I haven't noticed anything with it yet.

[Harvey]

Zoom
Exposed Metals Freezer Bagged To Keep From Contaminating Food

Zoom
Pyrex Dish With Masking Tape Label Beneath

Zoom
Label Under Glass - Writing is on the Adhesive Side
Just some kind words for the Ice to grown on

Zoom
Using Distilled Water

Zoom
Filled with Water - Ready to Freeze

Zoom
After a few hours - Crust formation shows air flow depression

Zoom
Side View shows Attempted Dendrite Formations (Glass Fogs fast- sorry)

==================================

Hi Definition Movies:

Surprise Ending:
YouTube - Lambright - 014

Failed Attempts at Rolling Shutter Illusion:
YouTube - Lambright - 015

[woopy]

Hi all

other test results on pmh icing

pix 1 and 2 show the pmh standing with a long bolt as basis

see the assymetry, and the air tunnel (probably almost 2 assymetrical opposed air tunnels ) developping arround the complete system.

This assymetry have to be further researched and i think that the air tunnel energy develops all arround the device. (please see all my previous post and make you a picture)

Pix 3 is the previous pmh next to another pmh with round tubing (seems to be far less efficient at the present)

OK so far some ideas , it seems your are somehow sleeping here !!

please dear friends don't be shy to try all those icing. we all have to learn, and this stuff is really great.

good luck at all

Laurent

[woopy]

Hi David

Of course you can no problem.

Here some more tests

What is difficult with icing is that the freezer may have some magnetic surrounding which gives different results.

But what i can say is that the pmh effect is very clear in the ice.

i have enclose some pix

pix 1 is a small pmh deep in water see the stratifications. But as i say before, the stratification works better in one of my freezer and is not so clear in another one), So i am not sure that those strat are due to the pmh.

pix 2 is a bigger pmh also in deep water but the container is more flat. See the impressive assymetry.

pix 3 is a test with a pmh at 3 basis. Seems not so strong as the U shape.

pix 4 and 5 is a pmh lying. See the strong assymetry but this time also under the basis, Very interesting.

I am now icing 2 different pmh on the side.

Yes the icing shows very well what is going on.

Hopes this helps.

Good luck at all

Laurent

[david lambright]

hi everyone...

i took my device out of the freezer and all around the tube were these radial "lines"....no bubble tube....i put it back in the freezer for now..,..i will post more later...david

[david lambright]

woopy...

again, great work!....i believe that what you have done is nothing short of fantastic...i am icing my oxide core device right now so when i get home[blood run], i will post again then.....one more time, great work woopy!...PS, do you mind if i post some of your test results at OU?....david

[woopy]

Hi David and Harvey

Yes i think you both should try the icing test on your device.

Today i made lot of icing test with very impressive results.

I will do an analisis of the results tomorrow and report what seems to be of importance.

Just for info it seems that the tunnel effect is not circular but more 2 separate tunnels on both N and S pole of the pmh. Perhaps very near as what Ed pictures on his book cover. But i need more test to be sure and understand what is going on.

But anyway fantastic thread here, and also at OU.

Bravo at all and good luck

Laurent

[david lambright]

hi woopy!

Hi all

some more pix of this afternoon test

i do not see any influence of air movement in my different freezer

and any
way my question is the same

what is this ring of air all arround the basis of the pmh

the 3 pix shows the evolution during the freezing process.

1 after 1 hour all is frozen apart one specific part (dark zone)

2 after 2 hours all is frozen and the dark zone is now elevated , (higher than the rest of the surface)

3 and you can see in pix 3 the circular tunel of air surrounding almost all the contour (see the red arrows)

please consider this as an important question as to solve the leedskalnin beautifull energy solution

thank's

good night at all

Laurent

excellent work...i think you are correct! very interesting stuff, i am sure Ed would like this!...where is the air tunnel coming from?..so what i am going to do is freeze one of my oxide core PMH devices and see what happens...my oxide core device puts out a good deal more radiation than steel so i predict more of an effect...[i have not attempted this yet], so we will see what happens....i must go to portland to deliver blood to the red cross, [blood shuttle], and possibly help save a life!...i will be back tonight....david

[david lambright]

hi...

jesus at OU got his device today!....he is still testing.....i sure hope he can detect SOMETHING.....david

[Harvey]

Also - another thing I was thinking:

I wonder what type of ice crystal will form if I freeze a bottle of water in the middle of the PMH - I may try that too

[Harvey]

Hi Dave,

Thank you for your kind words

I tried the flame and smoke stuff - but I think it was too dark to see the smoke and the flame had too much air resistance so the inertial gravity was not too evident. The flame was useful in showing the side draft coming away from the elements while it was spinning though.

There is also a section in the video that shows me recharging the PMH - I noticed on playback, that while I was busy getting the battery positioned, there was a lot of 'pixelation' going on in the still shot (still in the since that nothing was moving, but the camera was rolling). This is as close as I have been to seeing anything wavy - and unfortunately, it can be explained away as video compression algorithms.

When I am finally able to detect the emissions I will be sure to find a way to record them for everyone.

I have borrowed my son's HD camera today. It is a Cannon VIXIA HFM31 HD CMOS - the same one I filmed the Mock-Up with. I plan on doing some sunlight shots today as well. The weather has cleared up a bit - so I may also try Jet's suggestion tonight and see what happens. (I'll check the convective reports first to ensure there are no coincidences)

Flame - Smoke and PMH Recharge:
YouTube - Lambright - 012


This Video is a Strobe Video: WARNING! Strobe Lighting can trigger unwanted physical reactions in some persons. You may wish to advance to 4 minutes where I finally synchronize the flash rate with the shutter.
YouTube - Lambright - 013 - WARNING!!! CONTAINS STROBE LIGHT

Cheers!

[Jetijs]

David, nothing in the mail yet. I will inform you as soon as I get the ring
Thanks,
Jetijs