gravity waves found

[CatLady]

did harvey ever make that oxide core device?....what do you think about the OU thread?.....goodstuff.....TODAY IS THE DAY OF DISCOVERY!

Hi David, I'm not sure what Harvey is up to with the oxide core just yet. I will have to ask him.

Better days are ahead and we will try and stay focused on the positive. I'm hoping you can have Glen film your rig and lets get some more comments. I do believe some progress is being made on your thread.

Cat

[Jetijs]

Thanks David!
I can't wait to get the ring In the mean time I have found out that you can get those ford model T magnets for about 100$ a set. There are 16 pieces in a set. But if you want only the cores that are not magnetized, they will cost you just 30$ a set. Unfortunately shipping of those cores to my country costs 3x as much as the cores themselves. I need at least 2 sets for one complete 24 pole ring for my tests. I will get them grinded to precise shape so that there is a great touching area, this is important according to the channeling info. And then I will put them on a rotating wheel and lock them. Of course I will have to magnetize them first. So far I have not found any suitable material here from which I could cut out the V shapes, because the needed steel grades are obtainable only in un hardened form. And the hardening process though which the cores gain their magnetic abilities is quite tricky, you need to cool the parts quick, but a bit too quick and cracks will appear. So the cores from the FordT is so far the cheapest way for me.

[david lambright]

cat...

Hello David and all...
I saw Bruce online at OU.com again today for a couple of hours. Its just frustrating that he finally made contact then asked for Matts address and then no response once again. I hope this never happens to you again David when you send out a rig to a forum member.

Cat

did harvey ever make that oxide core device?....what do you think about the OU thread?.....goodstuff.....TODAY IS THE DAY OF DISCOVERY!

[david lambright]

hi.....

where did solrey go?...i know he has been following both threads, just to get a chuckle i suppose, anyway i just wanted to say hey..........david

[CatLady]

Hello David and all...
I saw Bruce online at OU.com again today for a couple of hours. Its just frustrating that he finally made contact then asked for Matts address and then no response once again. I hope this never happens to you again David when you send out a rig to a forum member.

Cat

[david lambright]

jetijs!

under $5.......is what it cost to mail the device!....so now we wait...i hate waiting!....the oxide core device i sent you is alittle different from the rest...i hope you like it...let me know when you get it, show it to as many friends as you can, you will get results....still nothing from TPUbruce.....stay in touch....david

[david lambright]

hi

David,

I've been thinking (I know, that can be dangerous )
Wouldn't you agree that if there was any true distortion of visible light the Schlieren Photography would have identified it?

This is one reason why I think it has something to do with the green dot phenomenon. I think perhaps the rig is absorbing some fundamental frequency but all of the harmonics for that frequency are present so our brains, insert the missing frequency which it concludes needs to be there.

While the green dot illusion is caused by POV in the eye receptors, I think we also have a similar effect in the visual cortex. It is the same process known as the 'missing fundamental' in sound. We hear frequencies that are not in the original recordings when the harmonics for those frequencies exist. And I think we see colors (frequencies) where fundamental frequencies are missing.

Also, the ability to see this phenomenon seems to rest on the training or sensitivity of the observer.

Just by chance the other day, I was watching this video:
YouTube - I Did What I Could With My Gas Mask - George Formby

and I couldn't help but notice all of the 'heat wave' effects on the wallpaper behind the cats. That is just a still shot that was recorded, but the distortion is unmistakable for any observer because the compression algorithm in the video makes those things really stand out.

So we must accept that whatever the visual distortion is around your rig that is affecting the visual perception of tens of people viewing it thus far, must not be detectable from the Schlieren Photography. So we need to discover what can do that - affect the eyes but not the mirror.

Evidently, whatever it is - when it is recorded, evidently some viewers state they are able to see it in the video as well. I would love to have this ability, but regardless of how I try - Nada I've tried the blue light in the dark, the looking in the mirror etc. I've even let my 3 element rig with an absolutely strong magnetic field in it sit for several days and I observed it in all sorts of light. I even tried to encourage my brain to see the various colors and patterns by inducing colored light with changing patterns through the device (see:YouTube - Triplet Colors) hoping that if there was any condition I was not familiar with, perhaps my brain would learn to spot it. So far nothing.

I am hoping to find some soft tubing today and within the next few days construct one of your rings and perhaps that will help me. Also, CatLady has agreed to let me view one of your rigs when she gets one to evaluate so I am still hopeful

was the formby image animated?...you know, an ED style PMH emits this same radiation, even with a steel U and keeper...just energize one and watch it. if you rotate the PMH slowly, you might start to see it, very, very subtle, like in the peripheral at first, then when you realize what it is, you start to see it easier and easier.....did you see the OU posts?...i am not sure if toner vs. oxide will work....the oxide works, with an aluminum tube....i am sending jetijs the device with the internal coil, sorry jet, but today, wed. aug 25, 2010 i will put it in the mail, i had to work late.....i wonder what would happen if someone wrapped a rodin around an oxide core device or now about using ferro-fluid inside a hollow aluminum toroid and THEN putting a rodin coil on it!.....i know you can get a magnetic lock/flow with off the shelf FF......a small C shaped steel with 3/16"gap, 20 wraps insulated wire, submerge gap in FF and energize...the FF will bridge the gap or magnetic lock, that is the lock/flow i refer to....smokey2s posts at UO might shed some light or radiation'....the fact that Tesla saw this type of effect is significant also.......david

[IndianaBoys]

indiana........FINE work !!!
can you do a control sample.....the same technique.....but using something innocent.....umm......i dunno what to suggest........a leaf maybe?

rave154,

Carried out that experiment awhile back and thought of the picture when I saw the frozen ice concept being presented.

I can say that tap water and distilled water did not produce the same effect at all. Do not have the pictures of that, only kept the colloidal gold frozen cube one.

Thanks for the comment,

IndianaBoys

[IndianaBoys]

Interesting .

Cool . Is that without anything else that produce energy?

sucahyo,

It was some colloidal gold frozen in a small 2 ounce glass container.

Nothing else added.

The camera does not show it well, the spikes radiated from the center in a very tight pattern.

It was quite beautiful.

It is far different from a regular ice cube being frozen from using tap water or distilled water.

IndianaBoys

[IndianaBoys]

@ the Icemakers

It's hard to get a neutral starting point with water.. Don't forget that you're thoughts or surroundings can influence the ice-structure as well, at least.. according to Dr. Emoto.

YouTube - Water, Consciousness & Intent: Dr. Masaru Emoto

[woopy]

hi all

results from today experiment with pmh

Pix 1 and 2 the pmh is about 1 cm above the ground of the round container layed on a plastic bloc.

pix 3,4 and 5 the pmh is layed on the ground of a less deep container with of course less water .

Notice the corona of long and curved bubbles in oval form on pix 5

Now the pmh is in freezing without charge so i will compare tomorrow

good night at all

Laurent

[Jetijs]

David, check your PM!

[woopy]

Hi Sucahyo

I made another test this night

i put my PMH (charged with 30 volts) in the middle of a round container. with tap water

here the result in pix

in pix 1 the PMH is showed with the N on the left and S on the right.

you see the small montain (white intensity) something down the pmh.

Pix 2 is taken from the right of pix 1 and shows clearly the small montain and more thickness of ice on the left of the pix than on the right.

pix 3 and 4 are taken as per pix 1 and shows that under the small mountain there are big air bubble, and on the opposite of the PMH the ice is almost transparent, that is to say very compact, and this almost exactly at the same point where the peak of the mountain is on the opposite side.

So is it possible that the PMH creates a difference in density on his sides ?
What is happening accros the 2 poles ?

I will redo a test with the PMH something above the ground of the round container to see what happen under the PMH, i mean if there is a circulation.

OK waiting for your comments

good luck at all

Laurent

[david lambright]

you are right!

I think If Ed watched that gravity video he would probably say this.

" We have North and South pole magnets, positive and negative electricity, protons, and electrons, positrons and mesons and alpha, beta and gamma rays. Now why such a confusion? Does nature really need so many things in the perpetual transformation of things, on building up the matter and again taking it into parts? I think all that nature needs is three things, the North and South pole magnets and the neutral particles. Each kind of those three things can act differently with different speed and different combinations, and so they can accomplish different results. I believe the prospective physicists first should learn what magnets and electricity are, then they will have a sound base for their experiments and their calculations." Ed.L
Don't forget muons.

Or maybe he'd say this.
" Gravitation must be caused by the matter in the middle of the earth, and more concentrated than Uranium. When Uranium atoms burst they release the North and South pole individual magnets that held the atom together, then the magnets scatter all around, but when the atoms burst in the middle of the earth, and many burst at the same time, they can only run from the middle to the outside. When the North and South pole magnets are running alongside each other and in the same direction, they have no attraction for the other kind. They only attract if they are running one kind against the other kind. When the magnets are running out of the middle of the earth, as soon as they meet an object they attract it, on account of the fact that in any object there is both kinds of magnets in it. It can be seen by rubbing hard rubber or glass until they get hot, then they will attract sand, iron filings, salt, and other things. To see how it functions, move a salt crystal a little, if it happens to get on a different magnet pole, then it will jump away."
"The difference between the rubber magnet and the steel magnet is that the magnet in the rubber comes from the magnets that hold together the rubber, and both North and South poles are in the same side of the rubber and the magnet poles are small and there are many of them close together, but in the steel bar the attracting magnet is not the magnet that holds together the steel, but the surplus magnets the circulating magnet that was put in it."
Ed.L

Then he would go away doing this

Scotty.

he did say that already, have you been watching whats going on at OU?...Ed showed us the way and also said something about putting the coil inside the PMH metal.....that works too!...a persistent voltage results!....david

[david lambright]

sucahyo!

thanks for your insight!.....there are some interesting things going on at OU!...you should check it out, if you have not already.....david