gravity waves found

[witsend]

Source:Thunderbolts Forum • View topic - gravity waves found

Be careful of these claims. If you cannot see the effect with you eyes or feel it with your hands then it isn't happening.

Curious argument you use remelic. There is no way you can feel or see a whole host of phenomena that are, nonetheless very real. Xrays spring to mind. Also a whole host of particles such as neutrinos - known to be bombarding us in the billions - but entirely undetectable. I could bore you with a really long list. We can neither see nor feel them. Quite apart from which I got the distinct impression that both Dave and NorthWind both saw and felt anomalies? Not sure if you're cautioning us or if you're proposing alternative methods of detection. Can we impose on you to explain yourself better. And perhaps give us the credentials of the person that you quoted us above? I'm not satisfied from what he's written there that he knows more or less about digital photography than any of us.

[Jetijs]

just a thought...if there is any unwanted magnetic frequency perhaps "grounding" the device then charging might help...i still have a section of the original pipe, i only need a little over 24" for #2...i could mail you enough of it to replicate if you think that might help.........david

David, that would be great
I was going to ask you for a small sample of that pipe anyway to make a spectral analysis of the material so that we could be sure what alloy this is. I have some friends that can make this analysis for me If you could mail me those pipes I would be glad, I will PM you my address.
Also tomorrow I will meet some very sensitive persons and show my device to them, but so far they have "connected" to the device only though a photo and they say, that there is a very powerful field around that device with some odd properties. Will learn more about this tomorrow and post the results, might be interesting
Thank you!
Jetijs

[david lambright]

what?

there are some who would not like this to amount to any thing.....so that they may sell their "books" on theory.......theorisly...........david........"mag netircity ,thats what Ed would have called it".........a quote from a different forum...so what does it do ? how does this theory interact with matter?...........david

[david lambright]

jetijs

just a thought...if there is any unwanted magnetic frequency perhaps "grounding" the device then charging might help...i still have a section of the original pipe, i only need a little over 24" for #2...i could mail you enough of it to replicate if you think that might help.........david

[remelic]

From another forum where david is also presenting his idea.

The distortion in this image, is an artifact of it having been taken with a digital camera.

In most modern CMOS image sensors, the rows of the image are not all exposed synchronously. Rather these sensors have an "electronic rolling shutter" architecture, in which the rows are exposed sequentially from top to bottom (or bottom to top) as the image is read out from the sensor. This is a bit of an oversimplification, but nevertheless the effect is similar to what would happen if you exposed a piece of old-fashioned photographic film by sliding a horizontal slit from the top of the frame to the bottom.

In your picture:

The wheel segments at the top of the image, are moving from left to right, as rows are being exposed from top to bottom. The effect is that the segments appear to be skewed leaning to the left;
The segments at the bottom are moving from right to left, and so appear skewed in the opposite direction;
The segments on the right are moving downwards, as rows are being sequentially exposed one after another from top to bottom, so these segments appear elongated vertically;
Correspondingly, the segments on the left are moving upwards while being scanned from top to bottom, and appear shortened vertically.

(remelic, this is easier to see, if you click on the thumbnail to view the full-sized original image.)

I think If you took a video of any other rotating object with this camera, you'd see the same effects.

Source:Thunderbolts Forum • View topic - gravity waves found

Be careful of these claims. If you cannot see the effect with you eyes or feel it with your hands then it isn't happening.

[david lambright]

Flir

i have a friend who knows afire chief here in salem....she is inquiring about someone bringing a FLIR camera to keizer

[david lambright]

i shrink

you guys,...i do not know what to say. your brilliance on this matter makes me feel so small...we will find the answers we seek, i don`t know how to say thanks and have it mean all of what i feel.......david

[david lambright]

hi every one

sorry about the delay i am still having computer issues..jet and cody....did either of you have permanent magnets near your parts before or during assembly? i saw a pic of segments sitting on what looks like a ceramic magnet? any way i have to finish a couple of small jobs and after that i am dedicating all of my time and energy to this project....i will set up a demo at the keizer park ...when the weather is a little better .this is so important. if nothing else to explore further.at least 30 people have witnessed and seen this "heat" type wave for themselves...i urge anyone who is going to be there to bring cameras, video and still, digital and film to help capture this ...i know that Ed captured this in some BW photos he left there ..bruce knows which ones.. i wish someone had pics with better resolution check them out for yourselves at Leedskalnin.com...hi matt..talking to a friend today at 11:00...maybe slower film speed with a shutter will help..a question..do digital cameras "correct" the image? we WILL figure this out ...and anyone who knows about Ed, knows we are on the right track......david

[FuzzyTomCat]

Hi David,

Here is a "Google Earth" image showing the 6679.19 Km radius from W77 30' 00" at the Equator. The red line represents the proposed "negative" flux line that is near your location which I estimate about 3 miles from you. I know the past several days that atmospheric conditions in Oregon has been really bad and this may have some bearing on the effects and performance of your device.

I would recommend that if you have the time to get as close as possible to the area that the red line or "negative" flux line goes, and see if your effects and performance gets better. You may also try to document it with a camera that actually uses film with a ASA 200 or a old VHS camcorder that uses a tape and not anything digital. There is some problems with digital cameras such as "smoke" or "fire" some objects just doesn't look correctly even photographing of "Aura's" if done properly is done with film also.



Regards,
Glen

[Cloxxki]

John I know exactly what you're saying here. We used a variac in some of our experiments for a while and I could literally feel the pressure of a force against my temples when this was running. No-one else could. It seems to be a kind of rarified sensibility. Like some people can pick up flavours in food that others can't. Very strange.

When people hd such difference experiences, I wonder if we should not regard our bodies themselves as measuring devices themselves. One person is grounded better, in part due to usually differing foot wear and skin moisture. I noticed David at times goes barefoot (I am a barefoot fan myself since recently). If another experimenter is to wear Nike Air Max, I am not surprised that differences are found.

[Cloxxki]

Hi Cloxxki, Not sure of the answer here. But I'd have thought that hot or cold - both would need to be quantified and both would need to be deducted from the input power resulting in required reduction of power from that source. Effectively therefore the 'lock' should weaken. But I'm not sure that we know what's causing the heat. It may be from light that is somehow concentrated into certain specific spots - or it may, indeed, be from an interaction of the magnetic fields in the rig on localised areas around it inducing a kind of current flow of sorts? I would have thought that both, technically, should result in some weakening of that structure, at its least. IMHO it all needs more tests.

Thanks for responding.
Another analogy would be that of a lense. It's a light wave form causing the effect, according to David after all.
If the magnetically locked rig were to act as a lense, indeed creating the double cone shaped in-out field, the localized heat MIGHT be just be part of a continious and balanced compression/decompression, running at neutral in/output energy.
The theories I've read such as Marko Rodin's, tend to refer to a toroid as a soirt of gateway, Compression into its hole, decompression out. By aprocimation, David's rig is a kind of toroid. Currents and forced seem to always have 90 degrees across is a similar effect. Lenz, radient, etc. With a toroid, this would exhibit as thrust.

Another thing, human senses may interpret the effect as heat, when in fact it's something else, or a different kind of vibration than usually associated with it.

[witsend]

Jetijs

Out of interest have you tried the magnet experiment, where a cylindrical magnet is held against a CRT and rotated, showing the B field is fixed (somewhere). If so did you feel anything through the magnet? I ask as I have done the test and I can feel a high frequency vibration from the magnet whereas a friend cannot. So I wonder if there is any mileage in the idea that some people are more sensitive than others to certain effects.

Regards

John

John I know exactly what you're saying here. We used a variac in some of our experiments for a while and I could literally feel the pressure of a force against my temples when this was running. No-one else could. It seems to be a kind of rarified sensibility. Like some people can pick up flavours in food that others can't. Very strange.

[john_g]

Hi all.
Today I was at the negative flux line that Glen pointed out to me and tested the device there. No change whatsoever

Jetijs

Out of interest have you tried the magnet experiment, where a cylindrical magnet is held against a CRT and rotated, showing the B field is fixed (somewhere). If so did you feel anything through the magnet? I ask as I have done the test and I can feel a high frequency vibration from the magnet whereas a friend cannot. So I wonder if there is any mileage in the idea that some people are more sensitive than others to certain effects.

I have just redone (as you do!) the B field test again. With the CRT in the normal position, sitting on its feet, there are two concentric fields, one above the magnet and one below. Turn the CRT onto its side the fields are now one each side of the magnet. Not sure what to conclude from that though.
Regards


John

[witsend]

thanks Jet. At least we now know that the phenomenon is not locality dependant.

[Jetijs]

Hi all.
Today I was at the negative flux line that Glen pointed out to me and tested the device there. No change whatsoever