Imhotep's Radiant Oscillator Video

[Bodkins]

YouTube - Bodkins 37.AVI

YouTube - Bodkins 38.AVI

YouTube - Bodkins 39 Time.AVI

[gotoluc]

Hi Luc,

Many people have wondered if it is a vacuum or if there is gas in side or just ambient air. I think it is just air.

Bedini knew Gray and saw these motors many times and took meticulous notes. The tubes were specifically built just like in John's notes. I believe if there was anything like a disguised bulb that it would definitely not have gone unnoticed by John. I would be rare for something to slip past him. The details of the rods, how they were connected, etc... are too specific to be bulbs I believe.

If there was gas inside or not, I don't know. I think it is air and that is what my tube has...just air and I had a magnet repel a couple inches so that shows me not what the tube originally had but at least with air, this kind of effect can be had.

Thanks for the reply Aaron. I do remember now seeing one of Peter's videos where he explained John's notes of the tube construction. I just thought that maybe at the time John could of been threatened by some to not share it in its raw form so he disguised it.

Just a wild guess on my part and tossed it in. Anyways, you are years ahead of me on this

Luc

[nat1971a]

Actually if i remember right Tesla does mention that the transmission occurs via resonance of the coils...i.e the vibrations in the transmitter transmit via resonance. Tesla also advises that he had to tame down his lectures on resonance due to peer pressure

[nat1971a]

RE Tesla's big mistake article

I have proved that the transmitter will work without a ground connection. I am sure it works better with one but in my experiments it doesnt appear to work or be required...which is odd

[Aaron]

tube contents

This was also making me think of the Gray tube and the tube replication Aaron is working on. It wouldn't surprise me that the tube should have a gas or mixture of gases inside like the Joe Papps engine.

@Aaron, have you considered this yet?... and that maybe Gray was using some kind of commercial application bulb for his tubes and this is why he was trying so hard to hide it.

I know of a bulb specialist in my city. That is all they sell. It wouldn't surprise me that there is some kind of gas bulb with a fine mesh grill already inside it.

It's worth a look maybe.

What do you think?

Luc

Hi Luc,

Many people have wondered if it is a vacuum or if there is gas in side or just ambient air. I think it is just air.

Bedini knew Gray and saw these motors many times and took meticulous notes. The tubes were specifically built just like in John's notes. I believe if there was anything like a disguised bulb that it would definitely not have gone unnoticed by John. I would be rare for something to slip past him. The details of the rods, how they were connected, etc... are too specific to be bulbs I believe.

If there was gas inside or not, I don't know. I think it is air and that is what my tube has...just air and I had a magnet repel a couple inches so that shows me not what the tube originally had but at least with air, this kind of effect can be had.

[gotoluc]

I CAN NOT FIND IT IN THAILAND !!!!

Could someone please try for me an experiment - most likely UK or Aussie.

On my system - or any other high voltage line like original Imhothep - PLEASE try and see what are the effects of using a SODIUM VAPOUR light bulb in compatison to our CFL's.

In the UK they are called SOX - Low Pressure Sodium Vapour.
Produced specailly by Phillips, GE and some bit by Osram.

If not sure, refer to this page:
The Low Pressure Sodium Lamp

I might be onto something and need to play around with Sodium and Nitrogen as gas in the tube - to replace the fluorecent mercury vapour. First I want to know how they will lit up in the HV single conneciton.

Further in this line: Does anybody have an idea about practical use of NITROGEN as luminence in lamps - or more important as conductor for electricity potential (Volt)?

Hi Corrie,

after seeing your 022 video yesterday similar thoughts were coming to me about trying different gas bulbs like Xenon, Neon, Krypton and Sodium.

This was also making me think of the Gray tube and the tube replication Aaron is working on. It wouldn't surprise me that the tube should have a gas or mixture of gases inside like the Joe Papps engine.

@Aaron, have you considered this yet?... and that maybe Gray was using some kind of commercial application bulb for his tubes and this is why he was trying so hard to hide it.

I know of a bulb specialist in my city. That is all they sell. It wouldn't surprise me that there is some kind of gas bulb with a fine mesh grill already inside it.

It's worth a look maybe.

What do you think?

Luc

[Aaron]

Imhotep's websites

Just as a reminder, here are Imhotep's websites:
Imhotep's Laboratory | Renewable Energy
Imhotep's Lab Interactive FAQ • Index page

It doesn't look like he has posted in his own website for a while. I hope everything is ok.

[gotoluc]

Can you post a schematic of your lc oscillator circuit? I've been trying to make a colpitts oscillator / signal generator for when I get vacuum tubes (to switch coils instead of trannies which get soggy in my opinion) BUT nothing I make works. Except one, which would oscillate for about a second. I've got 2 variable 60 to 160 puffs and 50 k pots and rf resistor... Only other option I can think of is I found info on a type of tube which is specifically made to oscillate, and another type appears to be made as a cut-off diode... Also looked into crystals but their circuits are too steep a learning curve for me; I can't visualize what's happening.

/// to all: made my move to under the house!!! Also found someone on this thread who works near where I live, so we'll probably get together for a think tank. So I'm extending an invite to all to take a peek at my lab...

YouTube - Inquorate 15

Cheers

Hi Inquorate,

Nice lab space you have there mate ... Thanks for sharing it

There are two kinds of LC circuits, Parallel and Series.

Parallel circuit:


Series LC circuit



I have just started playing with these in my spare time for the past 2 months now, so I'm no expert and I'm not really interested to what the experts know about them as I believe they are not looking for what we are looking for.

As you may know I started a topic on my findings at the Overunity forum: RESONANCE EFFECTS FOR EVERYONE TO SHARE

and here are 2 videos I posted to date:

YouTube - RESONANCE EFFECTS FOR EVERYONE TO SHARE test 1

YouTube - RESONANCE EFFECTS FOR EVERYONE TO SHARE test 2

and this video is from someone who has posted at the topic a video demo that is showing much more detail effects found around a circuit in resonance:

YouTube - resonance coil and wavegen

@everyone,
sorry if this seems somewhat off topic but it may not be. Please let me know what you all think.

and to all

Luc

[Inquorate]

Tesla's big mistake article

I read that Tesla's big mistake article, and I gotta say I disagree with the guy's explanation.

Foremost, he says only ac, not dc will propagate along a single wire.. I know he's wrong about that, cause I've done it with dc pulses.

Next he says tesla didn't take into account the property of air dampening hertz waves. But that's ludicrous. When maxwell said electromagnetic waves could be longitudinal or could be transverse, but that he encouraged people to look for transverse, Heinrich Hertz looked for and claimed to have found evidence of transverse waves. Tesla could not reproduce Hertz's experimental data, and discovered that hertz had not taken into account the action of air on his system, and travelled to meet Hertz and tell him. So I doubt he would have been ignorant of the action of air, as he was the only one at the time truly considering it.

I found a page with citations of experiments done by russians which validate the idea of longitudinal waves, and in fact showed experimentally that ANY wave (aether stress) caused by an irreversible process (unidirectional) can be picked up by unbalancing an otherwise balanced ELECTRONIC circuit!!!

Longitudinal Waves in the Vacuum

[DavidE]

Howstuffworks

HowStuffWorks "How Wireless Power Works"

[Aaron]

plywood coil references?

However for the real aspect in science and out experiments it has a bite in it. I made a very simple device early on some 4 months ago. I wound 100 lengths of copper wire over a sheet of 100x100 cm plywood - one winding every 1 cm. Connected this up to earth and a bridge diode set and four small nano F capacitors - and I charged my mobile phone on it. It was not my invention, got it from the internet. BUT it worked.

Where is all that energy from? Most likely form billions of building dumping excess energy through their earth wires, power stations, transformers, electric wires all over the world - POWER LEAKING TO GROUND. Add to this power transmissions from mobile phones, radio and TV stations..... The list goes on.

Hi Aromaz,

Do you have any links to the plywood and wire project?

[gotoluc]

Luc, I am not in this for myself and my self ego is solid enough. I do consider criticism very valuable here. Neither did I try to defend my system nor suggestions. I am seriously trying to get to the botom of this.

If that was not my wish, I am sure I could use this circuit and all I have shown in the video's rather to get or scam BIG money from someone ignorant. Thus, it is here and hopefully we all can work together to make it workable for the people of the world. Later on we can figure out how to use this in modified form to make profitable products.

Is this right, good and valid -
A: IF YES, then lets fine tune it and release it to the world. Note my word 'release'. I doubt seriously that I would go into production of this kit.
B: IF NO, then lets forget about it and go on searching for the valid one.

Hi Corrie,

thanks for the reply and confirmation.

We are exactly on the same page. My wish is to find simple but effective alternate energy solutions to help better the life and conditions in 3rd World Countries.

I have a special connection with India and that would probably be one of the first place I would go to help the Villagers.

I was wondering if you had the time to download the video links I posted of a Russian man who has a working Tesla device using a spark gap like you have also found. He is capable of lighting many regular light bulbs using 2 ground point potentials and also disconnecting the starting battery and replacing it with a capacitor to keep the device self sustaining.

It is all in Russian but it could help with idea to see how he does it.

Thanks

Luc

[Inquorate]

@Bodkins

I'm usually the life of the party. Agile wit, hilarious sense of humor..great timing on delivery. Intellectually stimulating if the audience is receptive to being challenged.. I can perform better than a clown in a circus tent. Just one small problem. Whilst I do so love humanity, I can't stand people. Pigeons are more my style.

[Bodkins]

@Ren Lidmotor Cool Im On it
@Aromaz the earth is a big cap pump it with time potencial!
@Inquorate I bet your fun at a party
Got some videos up loading

[Aaron]

nice blog!

Got caught up in idea explosion and put everything that came into my mind down... Ended up so it won't fit on as a post here, so I started up a blog page I don't intend to continue with, but it's all there for anyone to read.

Deep thoughts

Nice blog!