Announcement

Collapse
No announcement yet.

ReGenX Coils and ReGenXtra switching

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BroMikey
    replied
    Thane's RegenX Video series on Tesla Bifilar coils that SUUL
    or coils the accelerate the rotor while collecting generated power
    as is normal for generators.


    https://www.youtube.com/watch?v=pyO8FUTDX68




    Leave a comment:


  • BroMikey
    replied
    Thane Heins ReGenX Video Series starting Sept 13th

    -------------------------------------------------------

    https://www.youtube.com/watch?v=qhcWDgMe8Ok


    -------------------------------------------------------

    Leave a comment:


  • BroMikey
    replied
    Ladies and Gentlemen, Boys and Girls.


    Thane Heins is back with a vengeance. Verbal explanations.

    Thane has been doing this explanation 15 years.


    https://www.youtube.com/watch?v=_xgyqu9Otto

    Leave a comment:


  • BroMikey
    replied
    REGEN-XTRA Goes commercial.


    https://www.linkedin.com/pulse/regenxtra-inc-autonomous-self-charging-electric-pdi-ceo-thane

    --------------------------------------------------------------





    -------------------------------------------------------------------




    Leave a comment:


  • BroMikey
    replied
    Originally posted by Turion
    I
    Connected across 8 batteries in series, each coil pair outputs
    257 volts DC at 2.4 amps.


    When I get things all back together I can shoot some video of my
    older machine........................................... .

    and show the

    1)amp draw of the motor without coils in place

    2) with 2 coils in place,

    3) with two coils under load at non resonance speed

    4) at resonance speed, and with enough load to get it to speed up at
    ANY frequency.

    I can also show it running with the NEW coils.

    Oh what fun.

    ...... I will share with everyone.

    My machine has a COP of probably 20, and it can be improved.
    Thanks Dave

    I know I can count on you for that. Anything short leaves many
    out of the loop. Once we can establish the simple speed up as a
    fact the rest is all down hill. It is time for Luc to build by following
    your lead.

    How thick headed people can be, I know I have been stubborn. It really
    is a shame that men are so easily offended, so proud, so high minded.

    I like Luc and all of the racist comments others have made mean
    nothing, he is a great person.

    What you are showing and saying is not hard. It is always good to hear
    from you Dave, so much given and I am able to receive this of which
    I am glad.

    That drywall dust will get you so use a mask. If you insulate well a small
    popcorn peanut AC unit will take the edge off on those 110 degree
    days. I was surprised to find that my old AC unit for a single room
    drew 6-7 amps and the same 5000 btu rated one these days only
    takes 3-4 amps.

    I am going to watch the video's you posted then comment at a later
    date. EVERY DAMN SECOND HEY?




    https://www.google.com/patents/US512340



    Last edited by BroMikey; 07-06-2017, 07:32 AM.

    Leave a comment:


  • BroMikey
    replied
    Many experimenters started with a Bedini wheel of magnets. The video you
    can hear the man say something VERY important, tho his English is a
    mess. If you listen he says that AT ONE POINT the motor does not see
    the generator load. He says that it is as if no coil generator was
    present. This is due to the nature of the way magnets drag on core
    material.

    He is the first person, besides myself I have found who has addressed this
    question of increases on the prime mover. He says that at the right
    tuning the motor does not see the load.



    https://www.youtube.com/watch?v=nZM76OUle-A

    --------------------------------------------------------

    Leave a comment:


  • BroMikey
    replied
    Regenx is growing

    https://www.slideshare.net/PDiCEOThaneHeins3240/ev-regenerative-acceleration-regenx-overview


    -----------------------------------------------------

    Leave a comment:


  • Doogy2Shoes
    replied
    Can someone more adept in electromotive experiments than I comment on this?

    Please?

    What are the potential uses of this in things like generators or motors?



    The printing process enables them to put both north and south magnet poles onto the same magnet surface.

    Further, the printed polarity process strengthens the original magnet pull force 2X-8X.
    They have a line of magnets called Max-attach because of how unbelievably strong they are.

    Additionally, they are not expensive to make. They can be printed on top of any existing magnet with a flat surface, using
    a printer similar to a 3d printer.

    Everyone's been asleep on this , imo. These were invented in 2008, and have been available for
    two years.

    They have one shaped like this for $2.85 each:
    Polymagnet: Polymagnet Products

    this one is $.99 each

    They do arc segment shapes as well, which would be just a curved version of the above.

    What about using this one in the ReGenX generator or in some other device instead of the standard magnets?
    They do arc segment shapes as well, which would be just a curved version of the above.
    Last edited by Doogy2Shoes; 03-04-2017, 06:22 PM.

    Leave a comment:


  • Doogy2Shoes
    replied
    https://en.wikipedia.org/wiki/Programmable_magnet

    [VIDEO]https://www.youtube.com/watch?v=drD416THU7Y[/VIDEO]

    Any thoughts on how these Printed Polarity Magnets could increase the efficiency of the ReGenX generator?

    these things can take a standard magnet and make one part of its surface more magnetic than the other part and are said to be much stronger than magnetics of the same size.
    Could this make the generator able to use smaller and lighter magnets?
    Could having one side of the magnets stronger make the the rotor more efficient?


    quote
    Can Smart Magnets Improve Your Product Design? | D2P News
    " D2P: What are some of the applications that you would like design engineers to become more aware of, going forward?


    PH: That would depend on what their needs are. For the most part, there’s probably the most potential for this product, initially, in the Max-Attach™ line, where design engineers need to know that ‘Hey, I can get a stronger magnet in the same size as this magnet I’m already designing in. Or, I can potentially make the magnet smaller, so it’s either lighter or less expensive, or just takes up less real estate in my product design. So, that’s something that I think, initially, would be very helpful to design engineers.

    And, just looking at it from a new product standpoint, there’s also the safety aspect of the shorter fields in those Max-Attach magnets. They have less chance to interfere with electronics, and less chance to interfere with medical related devices, credit cards, and other things that are sensitive to magnetic fields."
    PH: That would depend on what their needs are. For the most part, there’s probably the most potential for this product, initially, in the Max-Attach™ line, where design engineers need to know that ‘Hey, I can get a stronger magnet in the same size as this magnet I’m already designing in. Or, I can potentially make the magnet smaller, so it’s either lighter or less expensive, or just takes up less real estate in my product design. So, that’s something that I think, initially, would be very helpful to design engineers.

    And, just looking at it from a new product standpoint, there’s also the safety aspect of the shorter fields in those Max-Attach magnets. They have less chance to interfere with electronics, and less chance to interfere with medical related devices, credit cards, and other things that are sensitive to magnetic fields."
    more on :
    Correlated Magnetics Research's Polymagnets
    Can custom shaped magnetic fields improve wind-turbine generators?
    The technology, developed by co-founder and CEO Larry Fullerton raises the possibility of making complex alternating magnetic fields like those found in wind-turbine generators. The difference would be a high-pole-count rotor could be made from a single magnet, or perhaps fewer chunks of magnetic material. In addition, the fields set up by the magnetic rotor could be tailored to vary smoothly and rapidly as the poles transition from north to south, making wind-turbine generators more efficient. A 30-pole generator prototype provided the proof of concept.

    “Turn its crank at two turns per second and you get 60 Hz power, or if you put 60 poles along the circumference, one turn per second generates 60-cycle power,” company Vice-President Ron Jewell said. “We have seen interest for small-scale wind generators as a residential application, and small, portable generators for charging batteries – todays’ soldiers carry a lot of batteries, for example. This printed-magnet approach might serve larger wind-energy generators as well.”
    Last edited by Doogy2Shoes; 03-02-2017, 08:03 PM.

    Leave a comment:


  • BroMikey
    replied
    In this video remarkable statements are made concerning the evolution
    of the ReGenX to the ReGenXtra technology. Listen as Thane talks about
    the one battery being charged and discharged all at the same time.

    The battery charges while the motor runs full speed and helps the
    motor action at the same time but what I find interesting is Thanes
    statement and video showing a motor coil that has an integrated
    RegenX coil right together.

    On top of this double winding probably one on top of the other motor
    coil switching will also collect the collapsing field of the motor coil as
    it is switched OFF and the energy is sent back to the battery.

    I am not 100% sure how the geometry of this coil assembly would
    actually look. As shown ReGenX coils have a "C" core giving the coil
    two separate end by which it can toggle from "N" and "S".

    Not only can coils be built to motor or be made for generating the dual
    coil setup integrates both into one package.


    [VIDEO]https://www.youtube.com/watch?v=SX0gbxQ9JPs#t=418.784384[/VIDEO]

    Leave a comment:


  • JohnStone
    replied
    @Dog-One: Thanks! :-)

    @ALL:
    Still pondering on Heins' invention ...
    The delay is not the whole truth that is involved - I feel.

    Taking you back to the advanced handbook of Bedini rotor by P. Lindeman. There is a very comprehensive explanation on how the Bedini energizer works.
    Please recall that in vicinity of TDC Lenz forces act mostly radially and hence do not contribute much to opposing the motion of the rotor.
    At generator coils attached he shows a very simple circuit with a diode, a capacitor and LEDs with resistor.
    Once the capacitor is charged the LEDs consume some power few and at next cycle the capacitor is being recharged. But if the LED power is well tuned the capacitor will receive current only in the vicinity of TDC. It just makes use of the top slope of the sine wave. Before and after this time slot the capacitor will have higher voltage than the generator coil and because of the diode will be separated in these sectors of motion.
    I hesitate to copy drawigns from this book because of copy right. But if anybody cannot understand this fact alng words please come back and I will draw an own drawing.
    Please note that Peter mentions there that this effect is less prominent at small rotors and will increase with size of teh wheel.

    Now back to Heins:
    The current builds up wit a considrable delay. But please observe: The current starts to go up in the vicinity of TDC only. Short time before TDC. As we saw above this is the area where Lenz cannot contribute much to roter slow down because the forces act radially and not in the direction of magent motion.
    This energy will charge the "parasitic" capacitance of his coil. So there is real text book energy involved but with Lenz encountering obstacles - first.
    The notion above was never mentioned in any explanation of Heins' invention as far I know.

    So we see the first stroke of this engine gathering energy in an area where Lenz is weak. But differently form Bedini who consumes this enery in LEDs, Heins consumes this energy in a delayed manner.
    And here begins the second stroke where the - initially stored - energy is released and Lenz is invited to act with power. "Unfortunately" for him, time for doing evil is gone and his full power after TDC does good for acceleration of the rotor.

    Regarding replications:
    1. Size of the wheel
    Most replications that were published make use of relatively small rotors. Yes the acceleration is visible but not very prominent. So the size of Bedini's bicycle wheel might be right in order to get lower Lenc effect while charging teh capacitance of the coil.
    At a bigger wheel we have the big advantage that we do not need such high rpm like Heins. These rpm are not easy to handle by laymen and might turn out to be dangerous. What counts is the frquency of passing magnets only. The bigger the diemeter of the wheel the slower it needs to turn while showing same frequency.

    2. Prominent emanation of regenx effect
    Because of severe shifts in voltage vs. amperage the idling state might be extemely uneffective and once they put on a load the effectivity might increase - hence acceleration and less power input. I do not claim this to be true but I feel for a clear proof of replication it will be very important to get a much more prominent acceleration and some true power measurements. Just observing acceleration might be a dirt effect only.
    Please understand that I am 100% convinced that this invention is based on real and tangible laws of nature and this is a real discovery giving one small glance to God's creation. And therefore we need to have much more clear proof. Not proof for ignorants but for continuing and understanding this ingenious dicovery - and using it of course.

    3. Construction of coils
    As we learnt we need high capacitance in the regenx coil. Simple bifilar coils were suggested. But on other hand the effect might be prominent at higher voltage only - because of relaitvely low capacitance.
    If we want to increase the capacitance (gives lower frequency and lower voltage where the effect can be seen) we can make use of metal tape. Aluminum tape can easily be aquired. Well, the resistance is higher than at copper but please compute the square mm of a tape 0.035mm x 48 mm = 1.68 sqmm ! Now take 2/3 of this and you have an equivalent of copper = 1.12 sqmm.
    Now fortunately we have in the world imperial and metric measures so we can buy 48mm aluminum tape and transparent plastic adhesive tape of 50mm. Normal transparent adhesive tape is made out of PP - a frequently used insulator for capacitors.

    So we can wind a sandwich of:
    • Aluminum tape 48mm - 0.035 mm metal and 0. 35 mm adhesive
    • Transparent tape 50mm - 0.035 mm metal and 0. 35 mm adhesive
    • Aluminum tape 48mm - 0.035 mm metal and 0. 35 mm adhesive
    • Transparent tape 50mm - 0.035 mm metal and 0. 35 mm adhesive

    Thus every winding gives 0.28mm thickness = ca. 3 turns per mm while teh insulator is 3x0.035 = ca 0.1mm. So at our simple replications no voltage breakdown will be seen.

    Edges of aluminum tape are coverd by 1mm insulationg tape. The adhesive property gives a very solid winding with virually no moving or vibrating layers.

    As soon I have free time I will build a simple jig for winding such coils in order to check their resonant frequency and if they might be useful for a regenx replication.
    JohnS
    Last edited by JohnStone; 07-11-2016, 08:23 AM.

    Leave a comment:


  • Dog-One
    replied
    Originally posted by JohnStone View Post
    More explanations on how this coil performs and why.
    Originally posted by JohnStone View Post


    PDi Regenerative Acceleration Generator (ReGenX) 2013 Patent Disclosu?

    Does anybody know how to get this file as .PDF for print?


    Attached.

    Enjoy!
    Attached Files

    Leave a comment:


  • JohnStone
    replied
    More explanations on how this coil performs and why.

    PDi Regenerative Acceleration Generator (ReGenX) 2013 Patent Disclosu?

    Does anybody know how to get this file as .PDF for print?

    Leave a comment:


  • BroMikey
    replied
    Here s the answer for how the ReGenX coil works.

    ReGenX Generator Load Current Delay Explained

    [VIDEO]https://www.youtube.com/watch?v=huQFingZ2V8[/VIDEO]

    Leave a comment:


  • JohnStone
    replied
    I do not feel the outer shell of copper is for shielding. We can very clearly see that the tape is solderd heavily (silvey stain) in order to close the cover as conductive cylinder.
    Yes, you are right. Tesla used such a conductie ciylinder (it was iron - I remember) in order to get special effects but I do not remember what it was. Nevertheless we know that such measures DO HAVE effects that are commonly not known and researched. So we need to do it.
    1. Bifilar winding with thin wire (alternative with aluminum foil for SEVER capacitance)
    2. Keeping bifilar winding open, shorted or connected to a tuned resistor or maybe connected somehow to secondary winding
    3. Secondary winding for power output with thicker wire
    4. Outer sleeve from copper (this might apply to motor / generator in one unit only because we saw coils from Thane wher we can see very clearly the windings on outer layer.) But we need to understadn that these sleeves were often manufactured out of wire that was not enamelled and teh winding was then shorted to itself. This was much more simpler than manufacturing a solid sleeve.

    BTW: Vladimir Utkin pondered on shorted windings as well: Vladimir Utkin's Free-Energy Secrets - March 2012 see chapter "SECRET 2
    SWITCHABLE INDUCTANCE"

    Leave a comment:

Working...
X