Symmetric versus Asymmetric Electromagnetic Systems

[qvision]

Thanks very much, they work for me


QV.

[Ufopolitics]

Hi UFO.

Intriguing work, i'm having some fun using CEMF myself

When i click on your unlisted youtube links in this thread it says "Sorry - this video is private", how do i view them please ?


Thanks,

Hello gvision,

Well if you are having fun using CEMF...then You should not like what I am doing to it......

The videos should not list as "Private"...but as "Unlisted", meaning everyone having the link, should be able to see them...
Below are the two links...if still, can't see them, please let me know.

ONE_ENERGY_METER_READOUT_TEST_1 - YouTube

MECCALTE IMPERIAL RUN 2 - YouTube

Regards


Ufopolitics

[qvision]

Hi UFO.

Intriguing work, i'm having some fun using CEMF myself

When i click on your unlisted youtube links in this thread it says "Sorry - this video is private", how do i view them please ?


Thanks,

[promt]

YOU ARE NOT WELCOME IN ANY OF MY THREADS!
Isn't THAT CLEAR ENOUGH?
SO GTF OUTTA HERE!!

I don't give a sh-t for your welcome;
This's an open source, get your own site and rule there who's worthy to post who's not.
Until than get it as it is; clear enough now

[Ufopolitics]

I don give a F for yr "thread", not even talking to u and u here like a jack from the snuffbox.
Problems're all yrs, it's very noticeable

YOU ARE NOT WELCOME IN ANY OF MY THREADS!
Isn't THAT CLEAR ENOUGH?

SO GTF OUTTA HERE!!

[promt]

It seems you ONLY like My Threads?
I mean there are so many Threads on this Forum!!...Why you only "pick" on mines?
Does it hurts "that much" and "that bad"?...
I am very sorry about your problems, but sooner or later you will need some help.

I don give a F for yr "thread", not even talking to u and u here like a jack from the snuffbox.
Problems're all yrs, it's very noticeable

[Ufopolitics]

This "Happens" to BE Also My Thread...

Hey, I told u get yr pills before hitting keyboard
I don't care about viewers and I'm not on yr thread, u can pull somebodies legs, but not mine
Get FO from here to yr corner

It seems you ONLY like My Threads?
I mean there are so many Threads on this Forum!!...Why you only "pick" on mines?
Does it hurts "that much" and "that bad"?...
I am very sorry about your problems, but sooner or later you will need some help.

[promt]

I am tired of your BS...Make your own Thread about that Old Crappy Motors...let's see how many viewers you will get...
UFO

Hey, I told u get yr pills before hitting keyboard
I don't care about viewers and I'm not on yr thread, u can pull somebodies legs, but not mine
Get FO from here to yr corner

[Ufopolitics]

Any time You want...

Respect again, Turion; for desire to find the Truth (and as we see it's pretty expensive way).

By hearing can tell the motor's overloaded, and does not have run-out time, it's obviously stressed (I see the same on my rewinded ones).
If you look at the standard, industrial DC brushed motor and make a winding diagram of it you will see a very smart pattern - here's two of my motors (attach), 10 poles 12V 8A two stator's magnets and TWO (!!) electromagnets creating by winding (in fact it's one single wire of armature connected to each commutator's bar and giving maximum torque at ANY given time and armature position), and in fact it's one magnet and one electromagnet trying to align to each other with a great force (four or six magnets requiring four or six em-magnets accordingly for max torque).

And from other hand look at any rewinding diagram, it's always only part of electromagnet creating a force, only ONE pair at the time, it simply can't create a bigger torque; that's why the same set of brushes allowing to use unused coils for generation (and with Lenz counter-emf of course - just put a real load on it, not CFL). And don't mention twice more wires used in re-winded motor.

So, hope somebody else get a guts to show comparability of two same motors with the SAME amount and gauge of wire and with at least input readings of both.

Any time you like...
I will burn in crispy smoke one of those motors you are building there...whenever trying to compete with My Machines Torque...

Put your MONEY...where your fingers are writing...want a video of it getting burnt?
Wanna bet?
How much?
Let's do it ANYTIME you please...
You do it on your end I will do it on mine...
I am tired of your BS...Make your own Thread about that Old Crappy Motors...let's see how many viewers you will get...

In the meantime...Do this tests to that "Toy Motor"you built there...

20090823173537 - YouTube

TEST TWO, OPPOSED PENTAGON WIRING DESIGN, SULLIVAN MOTORS - YouTube




UFO

[promt]

Respect again, Turion; for desire to find the Truth (and as we see it's pretty expensive way).

By hearing can tell the motor's overloaded, and does not have run-out time, it's obviously stressed (I see the same on my rewinded ones).
If you look at the standard, industrial DC brushed motor and make a winding diagram of it you will see a very smart pattern - here's two of my motors (attach), 10 poles 12V 8A two stator's magnets and TWO (!!) electromagnets creating by winding (in fact it's one single wire of armature connected to each commutator's bar and giving maximum torque at ANY given time and armature position), and in fact it's one magnet and one electromagnet trying to align to each other with a great force (four or six magnets requiring four or six em-magnets accordingly for max torque).

And from other hand look at any rewinding diagram, it's always only part of electromagnet creating a force, only ONE pair at the time, it simply can't create a bigger torque; that's why the same set of brushes allowing to use unused coils for generation (and with Lenz counter-emf of course - just put a real load on it, not CFL). And don't mention twice more wires used in re-winded motor.

So, hope somebody else get a guts to show comparability of two same motors with the SAME amount and gauge of wire and with at least input readings of both.

[phrao]

A combo Joe cell with an Assymetric motor

Hello JJUK!

Well a great question there...the examples are awesome...I love the "Bucket" idea!...

The way I have interpreted as per my experience and tests...I will try my best to explain it...so please be "open minded"...
The way Radiant Field gets excited...is not through our Electrical Field at all, so looking from electronic flow end, will not help to understand this phenomena at all...but on the contrary...will make it more difficult to "digest"...
Radiant Field gets excited through our Generated Magnetic Field into open space. Now the means of making that happen from our end, is obvious we need electronic flow in coil...as Amps and Voltages...but what defines the "Incoming Reversed Radiant Field" is our Huge Magnetic Pulse out...then at the point we collapse our magnetic field drastically at zero time, zero electrical values...Radiant drives in at a faster rate, at a faster frequency and intensity. RE enters at our Times Off, looking at our Square Wave...From here I have tested playing with the duty cycle and Frequency...as with voltage intensity...and there are certain points when she enters constant and robust...and other that does not occur the same, so I have to increase, scale up my magnetic field strength to achieve same parameters...As I have observed many other effects that affect "Her" to increase or decrease...like certain types of Light Spectrum...basically Ultra Violet rays...

The Final frontier to make it "usable" is to store the Radiant Energy in High Frequency Capacitors...then process back to Hot side...it is not "usable" to run our equipment as is in Her "Original State"...
Another great advantage is Her capacity to induce "negatively" through air, without any loss...through Isolated and Non Isolated Secondaries...We could create as many "branches"(outputs) as we want with just One Coil Pulsing...and that is awesome.

Now you have mentioned something very interesting, and reminded me I have to disclose that...as to finish those videos and diagrams...and it relates exactly to what you are "conceiving" it could be done...and incredibly you are very right...I will explain....
There is a type of connection, a very simple one...that we have to make between Diodes Oscillator and Coil...and basically is just one single wire...I call it "Enhanced Mode"...when I do that, Radiant Enters super strong at first shot...first pulses...but once I have it On, for a small period of time...I can physically disconnect the negative pulses from oscillator...and Radiant will stay...however, and exactly like you have said...if we pull too much load...she will simply go...disappear...that we have to "re-dial" to get her back again...


Hope this explain-answered, somewhere near your questions.


Regards


Ufopolitics

I was wondering about the bucket idea and the aether flow. I was thinking about a joe cell. It sounds like a Joe cell, where you charge the cell for a short time then let it sit. It gains a charge over time. Maybe we can put one of your motors into the middle of the water of a joe cell to get a continuous flow. Or pipe the joe cell to the UFO motor just like they do under the hood of a car but not touch the UFO motor. You could start the UFO motor as per usual , then reduce it down to pulses untill the aether lets over. then completely. For one day in the future.

Anyhow, i haven't had time to make a motor as yet. Painting, landscaping, renavating and the new baby within the next 6weeks. I like the new pentagon design. I would like to do that instead of the V shape in the hobby motor.

john

[ampsvolts]

Beardon Free Energy Collector

You are welcome JJUK,
Basically put, - Beardon's "dont kill the dipole" statement, is reflected by the Naudin schematic in as much as connection is broken before current can flow.
As I understand it, the idea is to only use potential to fill the cap.... - free energy
It would be nice to find a full working circuit that does this.

Ramp generator schematics can bee seen at Ramp Generator Circuit | Electronic Circuit Directory
Kind Regards
AV

[JJUK]

Bearden Free Energy Collector

Maybe of interest.. The Beardon Free Energy Collector as shown on the Naudin site http://jnaudin.free.fr/images/tbfnrganm.gif ..( and The Bearden Free Energy Collector for explanation) Can this be of use here?

Hi AV,

Thanks for the link. I think I see why you've posted it. The 'Bearden Free Energy Collector' is not something that I was previously familiar with. Something else to read up on and try to understand...

JJUK

[JJUK]

In Response...

Thank you very much for your considered reply UFO. I've been away again for a few days which is why I was unable to post a response sooner. (Just wanted to make sure that you realised I hadn't been ignoring your efforts!) I have some more questions but need to mull them over before I push them out for public consumption. Looking forward to reading the next stage of your disclosure that you mentioned in your reply.

JJUK

[ampsvolts]

The Beardon Free Energy Collector

Excellent Post 159 JJUK And UFO Guru

Maybe of interest.. The Beardon Free Energy Collector as shown on the Naudin site http://jnaudin.free.fr/images/tbfnrganm.gif ..( and The Bearden Free Energy Collector for explanation) Can this be of use here?

Cheers
AV


Maybe not