Stanley Meyer Explained

[netzerite]

OneMinde

Thanks I'll have to look into that.

Netzerite

[Oneminde]

Nice!

What do you use for illustrations?

Netzerite

[netzerite]

Nice!

What do you use for illustrations?

Netzerite

[Oneminde]

[netzerite]

OneMinde

These look very nice!

Thank You!

Be sure to check out the other items in this web site as well.
They are very diverse.

Fiber Optic Products

Fixtures



Netzerite

[Oneminde]

I am still trying to grasp the laymans meaning of most of H20Power's revelations. But I have been thinking of trying something like what you mentioned here. Instead of duplicating the original Meyers design (with the use of large quantities of LEDs poked thru the sides of the wall; as I have admired in the many beautiful drawing and pictures) If we were able to use something like this....

http://www.fiberopticproducts.com/Stick3.jpg

http://www.fiberopticproducts.com/Stick2.jpg

... and in the interest of K.I.S.S. & Economics use one each of the preferred LED wave lengths "shining" (if you will) on one stick. Then conducted by way of fiber optic cable to another or multiple light sticks on the inside of the GP and cut costs while bombarding the molecules at as many wave lengths as is possible.

But again I am way behind you guys on all of these plans.

Here is where I found these Light Sticks.
Fiber Optic Landscaping
Good Luck!

Netzerite

UV Spot Light Source, Hamamatsu

[netzerite]

Oneminde Fiber Optics

What if we use a "mass spectrum photovoltaic light source" (just a name) as our light source [meaning; one lightbulb that gives off something like 200nm-700nm mounted beneath the GP] that use fiberoptic's as the lead and a lens to spread the light instead of LED's in the GP? This whould give us almoste all the needed wavelength at every lightsource...

Just one approche on it - never mind the cost, just the idea!

I am still trying to grasp the laymans meaning of most of H20Power's revelations. But I have been thinking of trying something like what you mentioned here. Instead of duplicating the original Meyers design (with the use of large quantities of LEDs poked thru the sides of the wall; as I have admired in the many beautiful drawing and pictures) If we were able to use something like this....

... and in the interest of K.I.S.S. & Economics use one each of the preferred LED wave lengths "shining" (if you will) on one stick. Then conducted by way of fiber optic cable to another or multiple light sticks on the inside of the GP and cut costs while bombarding the molecules at as many wave lengths as is possible.

But again I am way behind you guys on all of these plans.

Here is where I found these Light Sticks.
Fiber Optic Landscaping
Good Luck!

Netzerite

[Oneminde]

[Oneminde]

h2opower

How's the assemble of the GP going? ... i'm curious about the mock up for the LED's and such.

[h20power]

Looking good

How much space do you have between your voltage zones? The design looks great, almost like a final prototype. I wonder if I should show my design or would just lead to mass copying and even more questions for the copicats will have no idea of why I did things the way I did. One day perhaps when I start seeing more designs to let me know people are using their own creativeaty. For there many different ways to do this and in this thread I have talked about three different ways it can be done each having verying levels of risk that go along with them.

Keep up the great work for in the end you will free yourself from the energy enslavement game.

H2opower.

[Digits]

?

Yip I have to agree with H2O

I was getting a bit confusing with all the coments flying around.
My little head os stil spinning !

Just keep to the thread and priciples H2O have laid down thats all If you differ then start a thread on your own we dont want politics here just pure brotherhood and helping each other please no egos look at formula one what happens if strong personalatys dont give in.

[ATTACH]pq 1 - Sheet1.pdf[/ATTACH]

Here is some drawing I have done I am bussy to machine some parts though I have to do things as time is available and money.

I really believe this is going to work there is some work still left almost there.
the VIC is still a mystery to me but I will get there.
H2o after explaining why the LED had to pulse out of sequence with the puls train further up the thread helped allot thanks!

You are allowed to critisize mydesign ha ha I am just a amature.
good

[Oneminde]

[chasson321]

Thanks h2opower!

Thanks h2opower!

Your time and effort in this endevor is self evident. Thanks again for all your hard work and your willingness to share it with others.

[h20power]

Ok h2o I'm sorry for disturbing your thread I hope you be ok. I'll stop posting if you want, no problem. I hope you can leave this posts I posted at least for a while for let the people to have the opportunity to have this information too as I left all about it I could in this few posts I could made.

Print the all thread guys protect your future.

if some wants help or to help me you find me here [email protected]

Good bye I'm going to wait to see the future change in my old tv.

Not really for now we have two sets of rules to the same technology that do not agree with one another and that will confuse anyone who reads them. I went through all of my explainations trying to follow known science all the way. I am not sure how you did yours, and I will read your explaination in your own thread. But again as far as I am concerned I am done with Stanley Meyer's water for fuel technology. I am in the process of building everything and converting a car to run on water right now, as are many others. I am not alone in all of this for someone out there might beat me in becoming energy independent. I started moving forwards after all the math was done about 7-8 months ago. Since I am not rich getting things designed and built take time plus I work at my own pace. I have went as far as to show my version of a Gas Processor, but I have seen many others some that I really like, but I don't think I could make them, plus I will stick to my design for it is after all what I came up with.

So if you would please not confuse people that read this thread by removing your information to your own thread and put up a permlink so anyone wanting to read it can do so, thanks.


h2opower.

[h20power]

I knew that was your aim to take over my little thread, in saying follow your rules when I have already set the rules of Stanley Meyer's technology in this thread. As far as I am concerned I am done with Stanley Meyer's technology, all that is left for me to do is build it.

So it is like this; The technology of a wheel was lost and I redecovered it, and now your trying to tell me how it works. Get real! The one thing I don't need is someone telling me how it works when I already know how it all works!

I ask you nicely to make your own thread so you can post your technology and talk about it with others that are interested in what you are doing. But as far as in this thread, Stanley Meyer's technology is all out in the open for everone to have, all they have to do is build it, same as I am doing. Do you get me, IT IS DONE! If you follow my lead you will have a working model. Mostly all I do is help everyone to understand it better so they will feel the need to build and test things out for themselves. But are far as you trying to put your rules in a thread that is not your own that is a site deal breaker.

Energetic Forum Guidelines ~ Read Before Posting
Energetic Forum is a place for the sharing of positive uplifting ideas, technologies, modalities and discussion.

We believe that all humankind is connected at a fundamental level...

We believe that each of us is responsible to conduct ourselves, individually, and in relation to all humankind, in a manner that reflects only light.

Questionable posts that threaten to disrupt the purpose, flow and good nature of this forum will not be tolerated.

It is important to follow these simple rules so as not to jeopardize your account.


READ THE RULES BEFORE POSTING (public posts AND/OR Private Messages)

1. DO NOT post messages that could be considered offensive, inflammatory or that are aimed at starting problems with other members.
2. DO NOT post messages that might infringe upon the intellectual property rights, privacy rights, rights of publicity, or other proprietary rights of others.

3. Do not SPAM this forum with Messages or unsolicited advertisements for products or services.
4. Do not create multiple accounts. Each member should only have 1 account for themselves that they post from. Multiple accounts from one IP must be cleared with the Administrators.

The Administrators of this forum reserve the right to remove any messages or users from this forum for any conduct that they deem to be outside, or against, the positive nature of this forum.

The Energetic Forum Community is a powerful force for discovery, self-help, and change. Every Member is equally important and valuable.

We understand that anyone may make mistakes, respond in a negative emotional manner, lose their temper, etc., however if someone repeatedly acts in a manner that is non-productive, unfortunately, we will need to take action.

Please take a moment to view our Terms of Use and Disclaimer: http://www.energeticforum.com/legal.html
And you can read more here: http://www.energeticforum.com/renewa...html#post58237

For as far as I am conerned you have set up a situation that will upset me by posting your rules in my thread. Which is why I ask you to make your own thread in the first place for the one thing I can do very well is read people and their intensions. Now I ask you to ease your rules from this thread and put them up in your own thread. For you have broken the forums rules.


h2opower.