3 Battery Generating System

[i_ron]

[QUOTE=i_ron;311326]Looks good to me! Up and running this AM

Here is a close up of the antique knife switch

Ron

[IMG][/IMG]

[wantomake]

Loss for words

YouTube me and I'll fumble and be confused but happy. I'll video my expressions as I watch them. Then you'll laugh.

I know you and Matt have been busy. I can't even get the upright generator finished. Refinancing and renovating my home has removed me from frame of mind I was for the 3BGS.

If I had 10k to donate to your work I most certainly would.
Then move into the shop cause my wife would kick me out.

wantomake

[i_ron]

This setup is the most BASIC setup you can run and still see the principles in action:

You need a boost module

https://www.ebay.com/itm/4A-LED-DC-DC-Step-Up-Power-Module-Boost-Volt-Converter-5V-32v-to-9v-12v-24v-48v/323282902937?hash=item4b45299f99:g:nyQAAOSwCQZZCo8g

A double pole, double throw switch

https://www.ebay.com/itm/Knife-Switch-Double-Pole-Double-Throw-DPDT-toggle-Experiment-Test-1pc/272782341059?hash=item3f831833c3:g:kX8AAOSwTLxZfIw2

Two batteries
Modified Matt motor or ANY WORKING PULSE MOTOR

You run the boost module off one battery to provide you with a potential difference to run the motor. Then throw the switch and use the second battery plus boost module to provide the potential difference to run the motor from the OTHER battery. You simply move power from one battery to the other. Back and forth. You can run quite a while in either direction before you have to switch. Just don't overcharge the battery.

If you can't figure out whether you are getting any gains with this simple setup, I feel no pain for you whatsoever.
PS. Won’t work with “toy” batteries.

Looks good to me! Up and running this AM

Here it is charging a third battery from the flyback

Ron

[IMG][/IMG]

[Turion]

[wantomake]

Dang Dave you always draw a crowd !!!
wantomake

[wantomake]

Give it a spin

Thanks Dave,
I like it. Will try this out tomorrow.

wantomake

Thanks ron.

[ron48]

Sad news about clarence know he was a great friend to you wanttomake and he was such a free energy enthusiast sadly missed by all

[Turion]

Real Basic

This setup is the most BASIC setup you can run and still see the principles in action:

You need a boost module

https://www.ebay.com/itm/4A-LED-DC-DC-Step-Up-Power-Module-Boost-Volt-Converter-5V-32v-to-9v-12v-24v-48v/323282902937?hash=item4b45299f99:g:nyQAAOSwCQZZCo8g

A double pole, double throw switch

https://www.ebay.com/itm/Knife-Switch-Double-Pole-Double-Throw-DPDT-toggle-Experiment-Test-1pc/272782341059?hash=item3f831833c3:g:kX8AAOSwTLxZfIw2

Two batteries
Modified Matt motor or ANY WORKING PULSE MOTOR

You run the boost module off one battery to provide you with a potential difference to run the motor. Then throw the switch and use the second battery plus boost module to provide the potential difference to run the motor from the OTHER battery. You simply move power from one battery to the other. Back and forth. You can run quite a while in either direction before you have to switch. Just don't overcharge the battery.

If you can't figure out whether you are getting any gains with this simple setup, I feel no pain for you whatsoever.
PS. Won’t work with “toy” batteries.

[i_ron]

I know but I'm only a student here. He and Matthew have been great teachers with much patience for my slow mind.

I like the picture. 12 strands of wire that looks like you are twisting. Nice setup. I want to build a good sturdy winding machine for the shop. Matthew did a video showing the use of a measuring wheel(don't remember name of it) from Harbor Freight I think.

wantomake

Thanks for the like. Yes that is 12 spools of 24 gauge wire 160 feet long. Nothing has been said about twisting the bundle and having built Bedini coils i know he liked to twist the wires.

In Patrick Kelley's desk top machine the guy runs out 10 feet of wire and claps each end then twists the middle 80 turns. I just did 60 turns, But each time one twists in the opposite direction (CW/CCW)

A distance wheel is real handy. Being in Canada I don't have easy access to Harbour Freight but same thing at Lee Valley or Canadian Tire... look up Johnson measuring wheel.

I made mine from an old boat trailer roller and used an old calculator and reed switch combo for a counter.

First 10 feet, bit messy as it sprang back when I went fot the camera, lol

Ron

[IMG][/IMG]

[wantomake]

Just a student

And Dave speaks highly of you, take a bow

Ron

[IMG][/IMG]

I know but I'm only a student here. He and Matthew have been great teachers with much patience for my slow mind.

I like the picture. 12 strands of wire that looks like you are twisting. Nice setup. I want to build a good sturdy winding machine for the shop. Matthew did a video showing the use of a measuring wheel(don't remember name of it) from Harbor Freight I think.

wantomake

[ilandtan]

Late In The Game - Better Late Than Never

Dave and Matt,

Thanks for the information that you guys have been trying to convey. I see enough promise in the concept to invest some replication time. I have a third 8Ah battery on the way, hopefully three of those will be sufficient as proof of concept. I just happen to have a razor motor, and a low RPM wind turbine that could use your recipe.

It's my experience that in between the space of free energy devices, you will find the few who can navigate around the science fiction, conspiracy theorist and pseudo scientists, and flower of life zealots to bring new concepts and dispel old engineering standards.

You guys surpass that by apparently Creating the real deal.

I recognize the potential in the concept. Many wont see that potential because it is hidden in plain sight in a handful of low tech components that are just integrated differently.

Thank you for showing me the technology and reaching out to me. I humbly appreciate it.

John

[i_ron]

I get it. There are readers and there are those that post. I've never felt alone or left out. I have no desires or need of posting here.

Why do I post on this thread where nobody seems to hear or care. Maybe I feel that one day Dave and Matthew will accomplish goals they set. Then we can help the two or three here that will build and produce Free Energy for a desolate village, a desperate family, or a grandfather showing the grandchildren his replication and saw their eyes and minds light up!!!!

What is the purpose of these threads? My purpose is to help, encourage, open closed minds, and be an example. What I would give for an engineering degree. A phd in science. I'd never stop typing. All I can offer is courage and support of what is on my cheap self built work bench.

I'll never stop. I believe in this 3BGS system.
Time to kiss the wife and warm my heart, then nuke the ole coffee,
wantomake

And Dave speaks highly of you, take a bow

Ron

[IMG][/IMG]

[bistander]

Clarence R.I.P

Too bad. Regrets.

bi

[wantomake]

Great member has gone on to Heaven

Got a email today that Clarence from the Barbosa &Leal thread passed away June 5th.

He was a mentor and good coffee sippin friend to me.

You will be greatly missed my ole friend.....

wantomake

[wantomake]

I understand

I get it. There are readers and there are those that post. I've never felt alone or left out. I have no desires or need of posting here.

Why do I post on this thread where nobody seems to hear or care. Maybe I feel that one day Dave and Matthew will accomplish goals they set. Then we can help the two or three here that will build and produce Free Energy for a desolate village, a desperate family, or a grandfather showing the grandchildren his replication and saw their eyes and minds light up!!!!

What is the purpose of these threads? My purpose is to help, encourage, open closed minds, and be an example. What I would give for an engineering degree. A phd in science. I'd never stop typing. All I can offer is courage and support of what is on my cheap self built work bench.

I'll never stop. I believe in this 3BGS system.
Time to kiss the wife and warm my heart, then nuke the ole coffee,
wantomake