Harvesting Energy From the Sun Using Crystals

[MonsieurM]

Dr. Hildy: Far-Infrared, SuperLight and Beyond - YouTube

On the Wednesday, June 8, 2011 edition of One Cell One Light Radio, Dr. Hildegarde Staninger was joined by three panelists to discuss Far-Infrared, SuperLight, and Beyond: Sunny Jung, President of MPS Global; Dr. John Milewski, an internationally recognized Engineer in the field of Advanced Materials; and Dr. Richard Young, Executive Director of the National Registry of Environmental Professionals.

[shawnnweed]

The rodin coil is brilliant.

I don't know if Marko Rodin fully understands the applications of his coil or how we could use it -- I have listened to him speak, and I cannot comprehend exactly what he is "getting at". He does not give very concrete examples, nor does he explain the practical applications of the number system. (I.E -- plug in different configurations, and look for certain results.)

I do not have much time, so I hope you guys follow me on this -- this is a brief conceptual overview -- you need to use your VISUAL imagination to unfold this similarly.

Think of a rodin coil like a 'o' -- that exact visual shape.

v
o
^

The doughnut with the two equal, opposite magnetic fields = o
This is the regular 6(3)9, all of them equal in respect to each other.
I will call this the "balanced rodin".

I can only unfold this briefly -- but the rodin coil does not need to always be wound around the same mold.
You can still follow the same pattern of number windings to get the dense flux fields -- but with a different output.
What I mean by this I can articulate in different words -- you can compress one end to expand the other end with respect to the same still center.

MM went briefly over this concept -- this is my unfolding that exact principal in a use-able fashion.
6(3)9
Bolded is the compressed side -- Italics is the expanded side.
I will call this the "9 biased rodin"

Stay with me -- this is winding the rodin coil around a cone which is in the shape of a funnel. Cutting off a part of the bottom portion, so that the windings can fit through.

You can still wind around the funnel in the same pattern, with the same number of winds as you did with the [equally] balanced coil, and receive a stronger magnetic flux on the '9' end.

Instead of "charge" as the input -- transfer this understanding into a "pressure". Think about a vortex tube.



The top "hot" end is the 6, the bottom "cold" end is the 9. The input "charge" level is the pressurized air which enters from the side.

Gotten from this link: Vortex Trap

This tube, will also help us understand the ORME's, when we connect that "Still charge center" of a coil, with the transition between opposites. In order for a positive to become a negative, it must pass through "0". In order for the same air, of the same charge density to become cold, after being rejected from the "hot" end -- it must pass through "zero". Magnetic fluxes behave the same way -- they need to pass through a "still center" to become their opposites.

Also, for the future -- Keep in mind, the vortex tube does the same thing with water, as it does with air. This might help you view the Tractates instructions in a different light.

Air Trap

We can throttle the air flow pressure, and heat temperature coming out of the hot end, by making the "cold" end more narrow. We can also achieve the same effect, by increasing the pressure which enters the tube -- while keeping the same balanced "flow" rate on the cold end.

By modifying the rodin coil -- we have done the same thing on the "hot" end, as we have done with the magnetic field on the "9 biased rodin".

So -- how can we multiply the "aparrent power" between coils? We can slam a modified an increased "9" pressure, against an increased "6" pressure. (Think: winding a coil opposite to the "9 biased Rodin", to cancel it) By slamming the two against each other -- we force a "still center" which appears to be greater than the input "still center" (Read: we are squeezing down on 6 and 9, to make a very big "3".)

If we can show that inflated "3" a "grounding" path, into a "balanced rodin" -- you would just get out the same "inflated 6 & 9". What if you showed that same "3", an un-balanced coil configuration -- like a bigger "6 or 9 biased rodin" coil?

Remember -- john bedini and bearden talk about the importance of Asymmetry -- so I'm not looking to just re-create the same things I started with. We can use the apparently larger "9" to do more work, than the original "9" could have done. We can use the asymmetry to do work.

We can give the same pressure an improvement in efficiency of transfer, by giving it the same shape which it wants to flow in.

Distort the mould which a rodin coil is wrapped around -- so that it resembles a portion of PVC pipe. The pipe has thin walls, and is longer than a "doughnut" rodin coil. instead of an "o" -- 0.

The purpose of this is to create a larger (still center) "3" pillar in the center of the pipe. Compress the 6 and 9, you inflate the 3.

If you guys still follow me -- here is an adventure of the imagination which has occupied my focus today entirely.

This brings me to the outline of an invention which Walter Russell outlines as the "optic-dynamic generator" -- stating that if instead of transforming the magnetic flux inefficiently by cutting the flux field lines at 90 degrees -- we could more directly tap the source of energy to put to our use.

Look at how this "flux" appears --

So, instead of spinning the magnet to cut the flux lines at 90 degrees, we can spin a coil to tap the flux lines "in phase" the direction they want to go.
(In phase, is not with respect to the phase -- it is to illustrate that going "with the direction of flow" better taps the electric/magnetic pressure. This is instead of what we currently do by cutting the flux at 90 degrees, and storing its opposed reaction for use).

We could spin a coil, to tap a magnetic flux in its preferential direction to produce more current than usual -- I think.

Another way, of the ways we could tap the "flux" more efficently -- use the ice as a dielectric of a capicitor. Arrange the charge into center of a capacitor, the structured ice conducts charge a similar way that iron conducts magnetic flow. Discharge cap during the cancelling "moment" of each opposed "slam" moment.

I support this idea with some of tesla's drawings. The reason tesla drew his cap in the diagrams as he did was to have the dielectric store some of the charge which cancelled between his coils polarity (N/S).

What I have outlined, is the direction I am aimed at. With that -- look at the beginning post. Do you understand why putting the smith coil inside the rodin coil is such a good idea? The smith coil produces exactly the same "still center" configuration as the rodin, with different windings. Store the charge of the smith "in phase" with the rodin's center. (superimposed charge centers around each other)

Each magnetic flux has to go through a "still center" to produce its opposite. If it goes through a bigger, or denser "center" -- you can expect the same "density" to be added to the field.

This is what I expect, at least. I am still winding coils to verify this. I decided it would be good, to not keep this idea to myself.

If you connect both the smith, and the rodin coil to a spark gap
(HV pulsed Cap:>Gap anode:>Smith coil:>Rodin coil:>spark gap:>collecting cap)
Spark gap fires -- dielectric breakdown.
The smith coil fires first.
Creates the still center.
Rodin fires second
Superimposing its "still center" on the other "still center".

This is what I see -- using different "phases" we could create an aparrent gain in the output of magnetic flux from the rodin coil. (in this respect Phase is referring to timing, like a polyphase motor uses different impulses to produce rotational force at the proper moment)

Timing of the cancelling region of the gained rodin coil's fluxes, might lead to a gain in the energy stored in an additional cap, to funnel back to the first.

I will expand on these ideas later, in more detail.
Peace,

==Romo

I would have to agree with your assessment whole heartedly. I seriously doubt he did recognize the big picture until later. Notice that he kinda dropped off the map. This is about the time that he became enlightened. And I'm sure that it was probably his prote'ge' that informed him. This is when it all got serious. Notice his understudy was the one bringing the full capacity of this into the light and asking for funding from the general public. I fully beleive the tecnical aspect far surpassed his ability to acheive the goal. The ability to point at the moon doesn't mean you have the means to get there.
, Shawn

[MonsieurM]

from: Nikola Tesla and Dr. Walter Russell

The MiraCoil displays the very Principles expressed by Nikola Tesla and Dr. Walter Russell: "The Man Who Tapped The Secrets of The Universe" and Author of "The Universal One" and "A New Concept of the Universe". These principles enable us to produce and radiate very Coherent Energy Fields.

We use this Coherent Electromagnetic Field as one would use a racetrack. Instead of using a car, we are directing Electrons through a Coil which incorporates the clockwise movement of Gravity and the counter-clockwise movement of Radiation. Between these two counter-rotational fields exist the junctions of rest and healing. The healing benefits of Standing waves or Scaler waves are produced.

Our MiraCoils come with clear Quartz Crystal Tubes so you can place Inert Gas Devices or different materials (flower essences, star elixirs, gems, precious metals etc.) into the core of the coils and have that essence radiated into the body along with your personal tones. Playing your Personal Tone Tape through the MiraCoil system will guarantee greater results. Speaker systems are limited to moving air and creating mechanical pressure on the body while the MiraCoil operates on the electromagnetic frequency level, (the world of cells).

[MonsieurM]

And remember this is what you want to create: (whatever the experiment)



be it:

a transformer which the primary is a rodin coil, and the secondary is a Bashar Coil, nest the Bashar Coil inside the Rodin coil so to speak

or Smith Coil Nested inside Rodin Coil

and Don's Set up...CW + CCW = your Standing Wave....the timing is important too ; as petar113507 mentioned earlier you may need an Imbalance to get the extra juice

[MonsieurM]

Watch this petar113507 , you are on the good track , might give you additional Ideas

Watch the first part of this vid with the sound off, imagine the field around the coil is the E field,

Oscillators, the Basic Tank Circuit 2 - YouTube

do you see whats happening the E field is being reversed just like the magnetic field is.
This is giving you ac from both your secondary's
Dave

excellent vid

[petar113507]

The rodin coil is brilliant.

I don't know if Marko Rodin fully understands the applications of his coil or how we could use it -- I have listened to him speak, and I cannot comprehend exactly what he is "getting at". He does not give very concrete examples, nor does he explain the practical applications of the number system. (I.E -- plug in different configurations, and look for certain results.)

I do not have much time, so I hope you guys follow me on this -- this is a brief conceptual overview -- you need to use your VISUAL imagination to unfold this similarly.

Think of a rodin coil like a 'o' -- that exact visual shape.

v
o
^

The doughnut with the two equal, opposite magnetic fields = o
This is the regular 6(3)9, all of them equal in respect to each other.
I will call this the "balanced rodin".

I can only unfold this briefly -- but the rodin coil does not need to always be wound around the same mold.
You can still follow the same pattern of number windings to get the dense flux fields -- but with a different output.
What I mean by this I can articulate in different words -- you can compress one end to expand the other end with respect to the same still center.

MM went briefly over this concept -- this is my unfolding that exact principal in a use-able fashion.
6(3)9
Bolded is the compressed side -- Italics is the expanded side.
I will call this the "9 biased rodin"

Stay with me -- this is winding the rodin coil around a cone which is in the shape of a funnel. Cutting off a part of the bottom portion, so that the windings can fit through.

You can still wind around the funnel in the same pattern, with the same number of winds as you did with the [equally] balanced coil, and receive a stronger magnetic flux on the '9' end.

Instead of "charge" as the input -- transfer this understanding into a "pressure". Think about a vortex tube.



The top "hot" end is the 6, the bottom "cold" end is the 9. The input "charge" level is the pressurized air which enters from the side.

Gotten from this link: Vortex Trap

This tube, will also help us understand the ORME's, when we connect that "Still charge center" of a coil, with the transition between opposites. In order for a positive to become a negative, it must pass through "0". In order for the same air, of the same charge density to become cold, after being rejected from the "hot" end -- it must pass through "zero". Magnetic fluxes behave the same way -- they need to pass through a "still center" to become their opposites.

Also, for the future -- Keep in mind, the vortex tube does the same thing with water, as it does with air. This might help you view the Tractates instructions in a different light.

Air Trap

We can throttle the air flow pressure, and heat temperature coming out of the hot end, by making the "cold" end more narrow. We can also achieve the same effect, by increasing the pressure which enters the tube -- while keeping the same balanced "flow" rate on the cold end.

By modifying the rodin coil -- we have done the same thing on the "hot" end, as we have done with the magnetic field on the "9 biased rodin".

So -- how can we multiply the "aparrent power" between coils? We can slam a modified an increased "9" pressure, against an increased "6" pressure. (Think: winding a coil opposite to the "9 biased Rodin", to cancel it) By slamming the two against each other -- we force a "still center" which appears to be greater than the input "still center" (Read: we are squeezing down on 6 and 9, to make a very big "3".)

If we can show that inflated "3" a "grounding" path, into a "balanced rodin" -- you would just get out the same "inflated 6 & 9". What if you showed that same "3", an un-balanced coil configuration -- like a bigger "6 or 9 biased rodin" coil?

Remember -- john bedini and bearden talk about the importance of Asymmetry -- so I'm not looking to just re-create the same things I started with. We can use the apparently larger "9" to do more work, than the original "9" could have done. We can use the asymmetry to do work.

We can give the same pressure an improvement in efficiency of transfer, by giving it the same shape which it wants to flow in.

Distort the mould which a rodin coil is wrapped around -- so that it resembles a portion of PVC pipe. The pipe has thin walls, and is longer than a "doughnut" rodin coil. instead of an "o" -- 0.

The purpose of this is to create a larger (still center) "3" pillar in the center of the pipe. Compress the 6 and 9, you inflate the 3.

If you guys still follow me -- here is an adventure of the imagination which has occupied my focus today entirely.

This brings me to the outline of an invention which Walter Russell outlines as the "optic-dynamic generator" -- stating that if instead of transforming the magnetic flux inefficiently by cutting the flux field lines at 90 degrees -- we could more directly tap the source of energy to put to our use.

Look at how this "flux" appears --

So, instead of spinning the magnet to cut the flux lines at 90 degrees, we can spin a coil to tap the flux lines "in phase" the direction they want to go.
(In phase, is not with respect to the phase -- it is to illustrate that going "with the direction of flow" better taps the electric/magnetic pressure. This is instead of what we currently do by cutting the flux at 90 degrees, and storing its opposed reaction for use).

We could spin a coil, to tap a magnetic flux in its preferential direction to produce more current than usual -- I think.

Another way, of the ways we could tap the "flux" more efficently -- use the ice as a dielectric of a capicitor. Arrange the charge into center of a capacitor, the structured ice conducts charge a similar way that iron conducts magnetic flow. Discharge cap during the cancelling "moment" of each opposed "slam" moment.

I support this idea with some of tesla's drawings. The reason tesla drew his cap in the diagrams as he did was to have the dielectric store some of the charge which cancelled between his coils polarity (N/S).

What I have outlined, is the direction I am aimed at. With that -- look at the beginning post. Do you understand why putting the smith coil inside the rodin coil is such a good idea? The smith coil produces exactly the same "still center" configuration as the rodin, with different windings. Store the charge of the smith "in phase" with the rodin's center. (superimposed charge centers around each other)

Each magnetic flux has to go through a "still center" to produce its opposite. If it goes through a bigger, or denser "center" -- you can expect the same "density" to be added to the field.

This is what I expect, at least. I am still winding coils to verify this. I decided it would be good, to not keep this idea to myself.

If you connect both the smith, and the rodin coil to a spark gap
(HV pulsed Cap:>Gap anode:>Smith coil:>Rodin coil:>spark gap:>collecting cap)
Spark gap fires -- dielectric breakdown.
The smith coil fires first.
Creates the still center.
Rodin fires second
Superimposing its "still center" on the other "still center".

This is what I see -- using different "phases" we could create an aparrent gain in the output of magnetic flux from the rodin coil. (in this respect Phase is referring to timing, like a polyphase motor uses different impulses to produce rotational force at the proper moment)

Timing of the cancelling region of the gained rodin coil's fluxes, might lead to a gain in the energy stored in an additional cap, to funnel back to the first.

I will expand on these ideas later, in more detail.
Peace,

==Romo

[MonsieurM]

And the above will allow you to do the following




Transmutation patents

US2003226401
Atomic structure recognition and modification method and apparatus Inventor: LETOVSKY HOWARD
Also published as: US2005145031 // US2005155340 (A1)
Abstract -- The present invention provides methods and apparatus for determining the precise makeup of atomic and molecular structures, as well as providing the capability of modifying said structures. The invention uses induced resonant frequency wave effects to define and modify the electromagnetic, electrical, radioactive, atomic weight, and co-valent bonding characteristics of matter. One embodiment of the present invention may produce directionally controllable magnetic fields in gaseous media that interact with magnetically polarized vehicle surfaces to allow high-speed, highly energy efficient inter-planetary space travel. Another embodiment of the invention may neutralize waste products remaining from nuclear fission power production. The invention utilizes controlled multi-spectrum frequency induction to catalyze changes in atomic structures that may include: focused and dramatically amplified release of energy relative to natural states of matter; production of new alloys; transmutation of dangerous organic compounds into non-toxic media; and controlled polarization of matter. The benefits of the invention may include highly efficient interstellar spacecraft propulsion systems, hazardous waste elimination systems, efficient electricity production, and health enhancement of biological organisms.

patent: Atomic structure recognition and ... - Google Patents





------

Spiral coils generate very powerful electromagnetic fields by operating with two different but simultaneous resonant behaviors. Quarter-wave resonance is established by adjusting the frequency (and wavelength) of a radiofrequency (RF) voltage source until the length of the spiral conductor is equal to 1/4 of the wavelength of the alternating voltage. This generates an electromagnetic standing wave with at least one peak node and at least one null node. Inductive-capacitive (L/C) resonance is established by optimizing the thickness and width of the wire ribbon used to make the spiral coil. When inductance and capacitance are balanced, the current response will synchronize with the voltage input, creating in-phase behavior, minimal total impedance, and maximal power output. If two such coils are placed near each other, they will create an extremely powerful electromagnetic field between them, which can promote chemical and plasma reactions involving charged particles such as ions or plasma particles, possibly including nuclear fusion reactions (Leon Sprink got the Same results .

ELECTROMAGNETIC SYSTEMS WITH DOUBLE ... - Google Patents

[MonsieurM]

I can see what you mean. Actually two golden mean vorteces, placed in opposite rotation would eventually form an oblong circle like the one posted. Which of course would form a nearly perfect circle.

you got it and together they form:

It is also called a Fermat's Spiral -- from Wolfram MathWorld


The Fermat Spiral Also respects 936

Fermat's spiral (also known as a parabolic spiral) follows the equation


in polar coordinates (the more general Fermat's spiral follows r 2 = a 2θ.) It is a type of Archimedean spiral.[1]

In disc phyllotaxis (sunflower, daisy), the mesh of spirals occurs in Fibonacci numbers because divergence (angle of succession in a single spiral arrangement) approaches the golden ratio.[3]

[shawnnweed]

I think you will like this short video:

7 Major Tones of Light
7 Major Tones of Light - YouTube



Analysis of 7 Major Tones of Light
See: The Music of Matter | Energy Research for full details

IndianaBoys

WOW! This is amazing. It brings to mind God speaking the universe into being. I always thought of it as maybe a song he sang. It also brings to light songs being used to bring people out of comas, healing people, causing accelerated plant growth, causing water to be structured, etc. Makes me also wonder about overlapping frequencies. I wonder if 3,6,9 on the musical scale overlapped would have any unusual properties?

[shawnnweed]

Hi Monsieur

Recently, the Rodin coil has interested me a lot, as it is designed by sacred geometry, The twist it develops in the center is very beautiful:

The force field:

Also bashar proposed a coil that can act llike a spacetime antenna:

The Idea I have got is to build a transformer which the primary is a rodin coil, and the secondary is a Bashar Coil, nest the Bashar Coil inside the Rodin coil so to speak:

What do you think about this?
Elias

I would suggest to try it with DC first. And use a neosphere/ neodymium ball just to see what happens.

[shawnnweed]

Thanks IndianaBoys

from the link you posted:



see post: http://www.energeticforum.com/160291-post814.html


when you read this page: The Periodic Table of the Light | Energy Research

he almost enunciates all 7 principles of the Kybalion

I can see what you mean. Actually two golden mean vorteces, placed in opposite rotation would eventually form an oblong circle like the one posted. Which of course would form a nearly perfect circle.

[elias]

This will be one of next projects, first I want to finish my work on the Muller/Watson device.

[MonsieurM]

Hi Monsieur
[CENTER]
Recently, the Rodin coil has interested me a lot, as it is designed by sacred geometry, The twist it develops in the center is very beautiful:


Also bashar proposed a coil that can act llike a spacetime antenna:



The Idea I have got is to build a transformer which the primary is a rodin coil, and the secondary is a Bashar Coil, nest the Bashar Coil inside the Rodin coil so to speak:


What do you think about this?
Elias

I think this could make some powerful Antenna at the least....

let us know what happens, I'm quite curious to see the results of your experiment

[elias]

Nesting Bashar Coil inside the Rodin Coil

Hi Monsieur

Recently, the Rodin coil has interested me a lot, as it is designed by sacred geometry, The twist it develops in the center is very beautiful:

The force field:

Also bashar proposed a coil that can act llike a spacetime antenna:

The Idea I have got is to build a transformer which the primary is a rodin coil, and the secondary is a Bashar Coil, nest the Bashar Coil inside the Rodin coil so to speak:

What do you think about this?
Elias

[MonsieurM]

Thanks IndianaBoys

from the link you posted:

Jelaleddin Rumi, a Persian Sufi mystic who lived from 1207 to 1273 century AD once said:



It was also anciently said by the great Alexandrian master .

see post: http://www.energeticforum.com/160291-post814.html


when you read this page: The Periodic Table of the Light | Energy Research

he almost enunciates all 7 principles of the Kybalion

As the vibrations of light oscillate to ever higher rates, light extends further and further into subtler levels of the conscious field, which is to say that it extends into ever higher vibrations of consciousness.