Pyramid

[dragon]

It seems to me the 51.8 degree angle would be measured from the tilted walls to the base. It wouldn't be the actual angle on the triangle, more like the tilted angle from the floor once assembled.
________
FREE MAGENTO THEMES

[Altair]

Does anybody know the correct proportions for a "classic" pyramid ?
I had read somewhere that the base / height ratio was 11:7, which is 1.571

However, Phi is very close to that, being 1.618.
I have drawn both types just to see the differences.

One interesting point is that on the 11 / 7 pyramid, the ratio of the length of an angled side (1.272) divided by half the length of the base (.786) gives exactly Phi (1.618) !

So which one is the correct one ?

Altair

[CosmicFarmer]

So it seems your pyramid is accumulating the wrong orgone...

Please re-check your angles to assure they are what they should be. Maybe the angles are wrong?

One thing that was learned from orgonite was that quartz can rectify orgone. I also have learned from hardcore weather modifiers and people who strictly follow Willheim Reich that Don Croft's orgonite is a bad direction.

Who knows.

But quartz has been photographed with ultra long exposures in dark boxes to have an energy emit off its tip. Sorry I have no link... :-( for me... Theres alot of aura photographs with crystals improving the aura, anyway, maybe it does something anyway.

Try this. Get some quartz crystals, double terminated if possible. Tie them up and dangle them from the middle of the pyramid at the 1/3 2/3 and 3/3 meridians. Let it bake in the good vibes for a while and then repeat experiments.

How did you get the color of the energy?

Honestly from what I have read maybe the problem is the angles are wrong. Did you use Phi?

@Suchyo
Quartz becomes a resonating dipole when stressed, and water increases volume when frozen. the water squeezes the quartz so there is a little pressure gradient during the freezing process. However, it freezes from outside to in, and basically the fog would have frozen before the crystal got pressurized (maybe). Still, it is interesting! Is it repeatable?

[sucahyo]

But why is that My wife moved into the basement and I told her to do proper grounding before conducting further tests. On the upper level she couldn't find compasses agreeing with each other at least downstairs they showing the same.

My radiant sleeping aid have the opposite effect if I ground it. Some people here mention headache from their device if they ground them.

I don't mention this before because I thought your grounding source is reliable. You should try to connect it with a bucket of water, ungrounded.

Why it would be such high concentration of DOR inside? My understanding of DOR (according to Rife) was that is some serious pollution causing it such as nuclear substance. I don't have anything like that in my house or in the neighborhood. There is no cell tower in close proximity, only few windmills within a mile or so.

I believe DOR can be produced by your electronics, your well, underground water river, lay line, lief electric wire, bad spot, etc. Your house can become neighboorhood orgone absorber too if your wall have metallic paint or metal part.

Well, I think that everything has something to do with electricity

Electricity or magnetism can not explain why I can see this effect on ice with just stone:



That is non electric, non magnetic quartz stone. And I do measure it with compass and voltmeter to make sure of it. Fog is a sign of DOR energy, clear part is a sign of POR energy. What you see is alternating layer of POR and DOR produced by a live crystal.

I found some links about DOR - Wilhelm Reich: The Theory of Orgone

My version is here, and I think more complete than Reich version:

http://www.energeticforum.com/health-fitness-nutrition/showthread.php?t=5524

I wonder if my small ORAC may have something to do with it since they may attract DOR as well but the water from ORAC taste good. I also have so called HHD in the garden, outside and couple orgonite pieces in the house; one near the main comp and one near the fish pond. What may cause such high EMF pollution?? My energizers are traveling with me and the only one left in the house is turned off. I'm puzzled.

Do the bird or other animal like being in your garden with orgonite? Do your sky blue or whiter?

Collect all the orgonite you have inside the pyramid and then feel the energy. If the orgonite work like it should, then the energy inside the pyramid must feel good no matter how bad the surrounding is.

I strongly believe that a good orgonite produce the same aura as battery negative pole. While bad orgonite will produce the same aura as battery positive pole. I use negative radiant for my radiant sleeping aid.

However, I have to first figure out what causes mine to emit rather negative energy. Don't imagine having so much electro smog in my house to cause that.

btw I found something on electrosmog - Detect & Protect | What is Electrosmog?

I strongly believe that electrosmog is actually deadly orgone.

When you build an orgone accumulator, you will collect anything around no matter what it is. I believe you pyramid is strongly influenced with surrounding which happen to be filled with deadly orgone. The pyramid may collect different energy if you put it on the garden.

Some achieve conversion from deadly orgone to life orgone, but I don't think the science is mature yet.

For pyramid shape, I would try to mimic the real one with:
size = original size x pi^(n)

where n must not be fractional, an ordinal number that can be positive or negative.

[Jbignes5]

My initial thought was....

I'm glad I was still connected I appreciate your advise. I already told my wife earlier to close all sides and "floor" making only one accessible, like a door. When I get back I'll make them out of the thin wood and line with conductive foil inside. I wonder if coat of shellac on the outside would be sufficient. Probably glass would be better. Shellac is natural not synthetic material. I wonder what she could use meanwhile


Vtech

Shellac was my initial thought. But plastic would be better I would think afterwards and that can be mounted on top of the shellac. You can try foil but a fill would be better afterwards. Maybe some pink granite pured like a cement into the interior. I am sure they have pink granite as a cement.

[blackchisel97]

Good idea

If you don't mind you might want to make the sides real faces not just wave guides. The energy you are feeling is a splash effect since the energy can not be compressed it is splashing out the sides. This creates a higher energy potential and pulls energy away from anything it splashed through. Remember this should be the same energy that causes gravity in masses. There is not enough to cause a sideways push on you but there is enough to strip energy from you as it escapes the wave guide. That could be dangerous. So close the sides up. It needs to stay contained which usually in the real pyramids is done by the internal fill with a dielectric coating on the out side of the faces or sides of the pyramid. Any spray coating of dielectric would do if you decide to make a the faces or sides. I would also use a metallic fill for the inside as well if you are going for power generation.

If you have it closed up then adding the dielectric coating should help and yes put any conducting tip on it. It will help focus the energy to go up instead of out of your waveguide (pyramid).

I'm glad I was still connected I appreciate your advise. I already told my wife earlier to close all sides and "floor" making only one accessible, like a door. When I get back I'll make them out of the thin wood and line with conductive foil inside. I wonder if coat of shellac on the outside would be sufficient. Probably glass would be better. Shellac is natural not synthetic material. I wonder what she could use meanwhile


Vtech

[Jbignes5]

I would suggest...

If you don't mind you might want to make the sides real faces not just wave guides. The energy you are feeling is a splash effect since the energy can not be compressed it is splashing out the sides. This creates a higher energy potential and pulls energy away from anything it splashed through. Remember this should be the same energy that causes gravity in masses. There is not enough to cause a sideways push on you but there is enough to strip energy from you as it escapes the wave guide. That could be dangerous. So close the sides up. It needs to stay contained which usually in the real pyramids is done by the internal fill with a dielectric coating on the out side of the faces or sides of the pyramid. Any spray coating of dielectric would do if you decide to make a the faces or sides. I would also use a metallic fill for the inside as well if you are going for power generation.

If you have it closed up then adding the dielectric coating should help and yes put any conducting tip on it. It will help focus the energy to go up instead of out of your waveguide (pyramid).

[blackchisel97]

It makes a lot of sense

I was thinking of replacing the top with metallic "capstone". Don't have any gold but perhaps silver or even copper should work. I like the idea of coil around the top. Originally something was telling me to place a coil inside and starship came to my mind since it is simpler to wind than toroidal and may just work the same. However, I have to first figure out what causes mine to emit rather negative energy. Don't imagine having so much electro smog in my house to cause that.

again, very sound theory and thank you for your input

I have to start rolling towards Montreal. Will come back when I find a WiFi spot.
btw I found something on electrosmog - Detect & Protect | What is Electrosmog?


Vtech

[Jbignes5]

Hey does this make sense?

When we copy what I suspect is the fundamental particle on the smallest scale we mirror it's capability to operate in a passive mode. Look at the wave guide theory and how geometry changes the potential that is displaced by matter on the surfaces of the pyramid.

As the outside faces guide the streams of charges that are rushing into our core of the planet it generates a vacuum at the tip. This pulls the energy up through the tip in a focusing event. This causes the energy to stream out of the tip and the energy coming down around the tip envelops the stream and I bet twists the stream. Hence the reason for the swirling we see from the tip.

I believe the the pressure is made from the compression of the energy as it travels around the faces of the pyramid as it reaches the bottom it curls around trying to rebalance to it's normal grid spacing. This action causes a pressure to build at the base going to the tip and a vacuum at the tip because the shape is splitting the space at that point. This causes the direction of flow from base to tip and a focusing of the flow to increase the pressure for the energy to escape from. Thats why the pyramids had metal tips. So we have a core material that is semi conductive and an outer casing of dielectric to contain the energy and squeeze it out the tip through the metal cap.

These structures do this with very little external help from us. It uses a natural flow of energy that we have refused to look into. It is what causes the "gravity" on our planet and I bet it can be used with no problems to our environment at all.

What would be interesting would be to fill these pyramids with white powder of gold or Ormus and put an outer coating of dielectric material on the faces of the pyramid with a gold plated tip. I bet so much energy would be coming out of it that it could power blocks of houses for literally the cost of building it.

All one would need to do then is figure out how to harness the swirling energy stream coming out of the tip. Maybe a torus coil over the top of the pyramid?

[blackchisel97]

Check my post at http://www.energeticforum.com/renewa...tml#post112844

A very interesting connection could be made here.. What is the pyramid a copy of?

and some more reading - Pyramid power

WOW those are a great pictures,I've never seen them before. Thank you for jumping in and please continue

I also found some interesting post in OU forum - Pyramids. Consciousnes technology

I spoke with my wife and after showing to her some examples it seems that the color ribbons floating in and around the pyramid were indigo (not purple as I stated before) and black. They rotated clockwise, kind of like a radar screen.


Vtech

[Jbignes5]

Speaking of pyramids has anyone put this together...

Check my post at http://www.energeticforum.com/renewa...tml#post112844

A very interesting connection could be made here.. What is the pyramid a copy of?

[blackchisel97]

That description match Karl Reichenbach deadly orgone.
But why is that My wife moved into the basement and I told her to do proper grounding before conducting further tests. On the upper level she couldn't find compasses agreeing with each other at least downstairs they showing the same. Why it would be such high concentration of DOR inside? My understanding of DOR (according to Rife) was that is some serious pollution causing it such as nuclear substance. I don't have anything like that in my house or in the neighborhood. There is no cell tower in close proximity, only few windmills within a mile or so.

Interesting, I read that 1/3, 2/3 and 3/3 have different energy state. Unfortunately I forgot the link. Yes, that is correct.

I don't think what you experience have something to do with electricity. Well, I think that everything has something to do with electricity

I found some links about DOR - Wilhelm Reich: The Theory of Orgone

I wonder if my small ORAC may have something to do with it since they may attract DOR as well but the water from ORAC taste good. I also have so called HHD in the garden, outside and couple orgonite pieces in the house; one near the main comp and one near the fish pond. What may cause such high EMF pollution?? My energizers are traveling with me and the only one left in the house is turned off. I'm puzzled.

Thanks
Vtech

[sucahyo]

There is intense warm feeling and tingling sensation moving from fingers to the elbow when just a hand is inserted inside. Temperature inside seems to be couple degrees higher than outside despite the fact that there is no walls. Sleeping beside the pyramid resulted in painful leg muscles cramps.

That description match Karl Reichenbach deadly orgone.

At the same time at approx. 1/3 of the height from the bottom there is a warm and pleasant feeling. Also, the warmth is emanating from inside the hand out.

Interesting, I read that 1/3, 2/3 and 3/3 have different energy state. Unfortunately I forgot the link.

I don't think what you experience have something to do with electricity.

[blackchisel97]

interesting

Peter GRANDICS: Pyramid convertor of electrostatic to DC electric power


Vtech

[blackchisel97]

aura

I was able to get some observation about my pyramid. What is intriguing is the color of the floating energy field. It looks like a radar or ChI symbol. There is a ribbon/band of dark violet and returning back as a black. I don't think they are a "good" colors Is this a grounding problem or something else? Energy inside is strong. There is intense warm feeling and tingling sensation moving from fingers to the elbow when just a hand is inserted inside. Temperature inside seems to be couple degrees higher than outside despite the fact that there is no walls. Sleeping beside the pyramid resulted in painful leg muscles cramps. Does someone know more about those colors? I'm familiar with their interpretation in human aura but don't know if this applies to this energy field as well. Also, few test with fruits -pairs or slices of the same showed rather strong opposite to expected results. Deterioration occurred inside much faster while samples placed outside behaved normal. Why?
At the same time at approx. 1/3 of the height from the bottom there is a warm and pleasant feeling. Also, the warmth is emanating from inside the hand out.


V