gravity waves found

[Cloxxki]

Jetijs, I love your thinking, work, and that new plate design! SO simple, and should be greatly effective if the setup requirements are as David states.
Somehow having a slab of aluminum underneath seems something to make sure to take into account, which I bet you've already done.

If you get going with such fancy machine shop work, oh the variety of ideas to be tried....

Since your 24-halfpipes setup is not "working" yet, perhaps you're interested to try and angle all pieces clockwise by some degrees? Just in case David's effects come from coincidental assymetry...

[Cloxxki]

Jetijs, if you wonder if your eyes are playing tricks on you, just do the visual inspection at 1rpm also without magnetic lock. It seems safe to say that if the colors appear strangely then as well, it was visualy trickery.

Harvey, on your response to my earth and equator mentions (for which thanks).
I have heard of earth's bulge (shape) at the equator, however this does in not account for G measuring so closely the same at the poles and the equator, does it? Mach 1.5 at the equator, shouldn't that offer a significant local g reduction? Apply some honey on a miniature globe's equatr and give it a good spin to check ;-)
Said differently, if a rocket in "empty" space does a 12,000km diameter orbit around nothing in 24 hours, is there a measurable CF in side it? Would the spilled contents of a glass of water inside the rocket find the outer side, or would it just randomly splash around? How fast would a heat shield tile that comes loose move away from the rocket?
Speculating loosely: A gravitatular attraction difference of that magnitude should exist between the poles and equator, but in my limited knowledge is missing. The earth's presence as an aetherical "dip" seems to negate specific wave length G waves, equalizing it's spin. Or, the spin of the locked magnet (earth) increases G at each distance to the magnetic axis by the same amount it would have been decreased without the magnetic lock, for a non-effect which makes the earth's spin seem absent from a CF point of view. Do miniature earth model (like the desk top variety) exhibit the same effect? Hard to tell with so little attraction. Its mass seems too insignificant to tell any G from it to begin with? Big can or worms. Dozen of books te read, I'm sure.

[Jetijs]

According to Joseph H. Cater's book the Ultimate reality gravity is a simple EM wave in the lower infrared frequency with a wavelength of 1-6mm. I guess if the theory of resonating piece cavities is valid, then I should make smaller the red marked gaps in this picture:


They are now about 10mm, I don't know what the gaps are on Davids device, but if my device wont show any results I will compress the pieces more to get at least 6mm or smaller gaps, then we will see
Also I have ordered a 8mm thick steel plate to be laser cut in this shape:


With this piece we will be able to test how important the locking is. This piece will have no physical contact areas at all, so almost no resistance to magnetic flux. It will be about 200mm in diameter Will see how this works.

[Jetijs]

David, you probably have used up all your forum attachment space. You can use some free image hosting services, such as
ImageShack® - Online Media Hosting
Just upload your picture there and post the direct link here. Here is a test picture from my computer:

[david lambright]

UV photos

these were taken with a fluorescent type UV LIGHT...i do not have enough space for these files very very interesting photos...how can i get these uploaded??................david

[Joit]

Another Idea, since it should be g-waves.
Maybe it depends at the Place, and David lifes on a special Place.
May something for a Sunday afternoon, to drive few miles, and see, if you can cross a Erathline.

[david lambright]

if you are getting magnetic lock ..good my device locks barely but the effects are there...has any one eise felt a cold feeling around their PMHs??i am talking about a standard 2 junction U shape w/ flat top....Eds geterator is a PMH also but with 24 "junctions" as to not confuse i will refer to the #s when talking about them...jet can you call me? it seems appropriate that someone from Eds country replicates this device.....dont you think?...jetijs...if you call i canwalk you through it PS....you WILL get results!....i know our times are different ..call when it is good for you i do not care what time it is ...i will wake up for you also i am getting more phone cards so that i might call you instead....either way ,i look forward to the future AND talking to you........david

[david lambright]

bruce

Hi Harvey,

Please take a look at the second picture!! I have blown it up. Look carefully at the top of the pipe pieces. The rotor is not moving! It is in the exact position as the first picture! Look at how clearly defined the grass...

It appears to be a near perfect circular distortion...

What say ye?

Cheers,

Bruce

very odd ? i used an AIPTEK HD video cam that also shoots 8 mega pixel still photos i was trying to get the best resolution...bruce...i gotta go and get my work boots on!!......david

[david lambright]

Hi Harvey,

Please take a look at the second picture!! I have blown it up. Look carefully at the top of the pipe pieces. The rotor is not moving! It is in the exact position as the first picture! Look at how clearly defined the grass...

It appears to be a near perfect circular distortion...

What say ye?

Cheers,

Bruce

very odd ? i used an AIPTEK HD video cam that also shoots 8 mega pixel still photos i was trying to get the best resolution...bruce...i gotta go and get my work boots on!!......david

[nat1971a]

The total length of the V shaped magnets is most likely very important. It is most likely vibrating/resonating at the speed of light. This link below goes into more details about the total length of the ford V magnets and light.

The Matrix Metrics

[david lambright]

Hi all.
I tried to make a setup with dimensions just like David has. I used 33mm diameter pipe with 3mm thick walls. I cut it to 50mm long pieces and then I cut them in halves. This is as close I can get to Davids dimensions using what I have available. I used zip ties to compress all the parts together. I hotglued an acrylic piece from my previous experiments on a fan (magnets removed) and I hotglued the 24 iron pieces on that acrylic plate. Then I energized the setup. I checked if there was a short to the iron pieces and there was. The inner diameter of the backs of the pieces is about 120mm, so very close to Davids setup. Anyway, I don't see any waves, the lased gives no result, also I feel nothing with a big quartz cluster stone. But when I held a heavy piece of iron on top of the device, it kinda felt like it wants to move somewhere, kinda like there were some magnets underneath. At this point this should not be taken seriously, because the feelings could be just subjective. I also tried to rotate the setup under infrared light. Interesting thing is that if I rotate the wheel just slow enough, at about 1rev per second, and if I look at the center of the wheel, I can see green color inside each of the bent tubes with my periphery vision, don't know, might be my eyes playing tricks on me. If I look at the wheel like this longer, I can see transitions from red to green color spectrum, like rainbow, but with the blue and violet color missing. When the wheel stands still, no colors, the iron pieces look just gray. I tried to capture this on photos but no luck. That's it for now. Will test this setup some more.
Thank you!

i am confused also.......can you call me..PM me and i will give you my number....i will not slow down till you get the same effects...i am going to build a second model for bruce tpu...this build will be a start to finish build video..i wiill start today..i know you will be watching ...please call me.....david

[david lambright]

i dont know about "CC" plenty of hoaxes, just curious, sorry to get off topic....i promise you will not be disapointed....thanks

[david lambright]

bruce...first,let me say i am big"fan"of yours...your work gave me insight...i will start work today on #2 ..i know that i can reproduce this ...i almost want to send you #1....either way ....yes,yes and YES..........you are one of my heros....i do not know where you are but if you want...call me .......i cannot thank you enough......david

[Jetijs]

Hi all.
I tried to make a setup with dimensions just like David has. I used 33mm diameter pipe with 3mm thick walls. I cut it to 50mm long pieces and then I cut them in halves. This is as close I can get to Davids dimensions using what I have available. I used zip ties to compress all the parts together. I hotglued an acrylic piece from my previous experiments on a fan (magnets removed) and I hotglued the 24 iron pieces on that acrylic plate. Then I energized the setup. I checked if there was a short to the iron pieces and there was. The inner diameter of the backs of the pieces is about 120mm, so very close to Davids setup. Anyway, I don't see any waves, the lased gives no result, also I feel nothing with a big quartz cluster stone. But when I held a heavy piece of iron on top of the device, it kinda felt like it wants to move somewhere, kinda like there were some magnets underneath. At this point this should not be taken seriously, because the feelings could be just subjective. I also tried to rotate the setup under infrared light. Interesting thing is that if I rotate the wheel just slow enough, at about 1rev per second, and if I look at the center of the wheel, I can see green color inside each of the bent tubes with my periphery vision, don't know, might be my eyes playing tricks on me. If I look at the wheel like this longer, I can see transitions from red to green color spectrum, like rainbow, but with the blue and violet color missing. When the wheel stands still, no colors, the iron pieces look just gray. I tried to capture this on photos but no luck. That's it for now. Will test this setup some more.
Thank you!

[ewizard]

i went over some indoor photos...yuk..there is or was 1 video that was posted but it was the wrong one ....well, now it is the right one ...day light works good for HD....i was gonna tell you this,,,the quartz was sitting by the generator all day...usually our TV goes to a blue screen .. this time there was bands of color ,rainbow style ..should have took a pic...i always wanted to be a part of it, seems like now i am the start of it!....now we can bend light...."no lens" lenses....i set up an experiment today , getting ready for video about how Ed really moved those stones....the experiment worked good...does any body remember seeing crop circles w/ 24 segments? how many original stones in outer ring at stone henge...are there any other monuments w/ 24?....i remember seeing petroglyphs with wavy lines and spiral designs....they saw this too...i want every one to see and feel this energetic new wave.....cant wait for someone to try and verify the telescope experiment... i will post pics &vids tomorrow.....tell all leedskalnin people what is going on over here......they are going to flip........david

Just happened my wife had this page up and if you count the segments around the outer rim of this crop circle there are exactly 24. Look about half way down the page for the second crop circle shown (it's the one with a sort of Mobius triangle in the middle). Click Here