Donald Smith Devices too good to be true

[thaelin]

Etbc?

Anyone can watch Don Smith 1995 video from 1H:30... To 1H:40.....he cleary worked with a capacitive arrangement smilar to the ETBC.
Why an ETBC ? because you can convert reactivate to active easily.. The problem is. The excitation circuit ...

OK, SMPS I know but what does the ETBC mean? Went back a lot of pages last night trying to find reference to it but to no avail.

thay

[med.3012]

[QUOTE=Dwane;315728]

Hello there my friend,
I have returned home earlier than expected from Japan. It was an emergency return as my wife contracted a mysterious complaint. The return trip also was difficult. But we are safetly home now, that is what matters!

I now, with much reflection and thinking, understand how Don's devices work. As he says, it is a simple process once the understanding of the components' are used. I shall be attempting prototype as soon as I am able, which should be within the next next week or so. I shall then learn to make a video for distribution.

It is possible that many have learnt how to build the DON, but are afraid to publicise the fact. Perhaps they only share with those they can trust. If there is a big ring of trusted friends then it would be difficult to suffocate the information?

I shall be quiet for a while while I tend to my wife. I wish you well.

Regards

Dwane

all is well Dwane nice to see you, now we have an abundant info about this device but a step by step guide is what make the difference, we don't need huge power ! we just need a level to keep the cold people far from being died from freeze ...

if i understood the last two published video there's two method , the first direct which produce thousand of Ampere very difficult to handle, and the second method using another capacitor in parallel just to produce reactive power, active power came normally when a perpendicular magnetic field separate V and I here you have an active power , as discussed reactive power is subject of amplification as described in my circuit , anyone can simulate and see , now we need and effective circuit ... !


regards

[Dwane]

[QUOTE=med.3012;315723]

anyone skilled in such circuit is invited to help .. with modern electronic it's possible to achieve high reactive power from tiny active power, the correct timing circuit will be the big start engine !!!!


please help ..share :-)

Hello there my friend,
I have returned home earlier than expected from Japan. It was an emergency return as my wife contracted a mysterious complaint. The return trip also was difficult. But we are safetly home now, that is what matters!

I now, with much reflection and thinking, understand how Don's devices work. As he says, it is a simple process once the understanding of the components' are used. I shall be attempting prototype as soon as I am able, which should be within the next next week or so. I shall then learn to make a video for distribution.

It is possible that many have learnt how to build the DON, but are afraid to publicise the fact. Perhaps they only share with those they can trust. If there is a big ring of trusted friends then it would be difficult to suffocate the information?

I shall be quiet for a while while I tend to my wife. I wish you well.

Regards

Dwane

[med.3012]

[QUOTE=med.3012;315706]

this is a good news in my opinion we need a source of Reactive resonant electric current , this is your wattles electric power subject to amplification... after that it's easy to convert it

this is the circuit i am working with !





in the coil number 4 you have reactive power hundreds of time more than the input power, the circuit is a modified SMPS, what do you think ??

anyone skilled in such circuit is invited to help .. with modern electronic it's possible to achieve high reactive power from tiny active power, the correct timing circuit will be the big start engine !!!!


please help ..share :-)

[med.3012]

Anyone can watch Don Smith 1995 video from 1H:30... To 1H:40.....he cleary worked with a capacitive arrangement smilar to the ETBC.
Why an ETBC ? because you can convert reactivate to active easily.. The problem is. The excitation circuit ...

[ilandtan]

I bit a lot more and went to his Lodi CA. workshop. I did see his device show output power rise with every new load he put on it. He is rather harsh on himself but he will not say it or write it if he himself doesn't believe it completely.
I even ask directly on the wind direction of the secondary coil and it is wound only one direction. Not like Zzzz says.

Thanks Thaelin, I really appreciate you sharing your personal experience. I think there is a body of misinformation out there(here). Think of hundreds of pages perpetuated with zzzz, and the lack of success, years of none.

I am not going to bore people with unproven conspiracies. Just look at the algorithm of people's input. When they chime in. The tree is of knowledge is also the gathering place for the sale of rotten fruit. caveat emptor

I know Rick isn't part of the bad fruit, and his ideas of Don Smith's compression and expansion, and ground use all seem to speak coherently. His book is faithful to Don, and I will endorse the book to those who want Don Smith reference.

But be clear: Rick isn't giving you a BOM and circuit diagram, with build information on a working device. But it puts in perspective the sewer of information flow.

[med.3012]

[QUOTE=boguslaw;315705]

YEAH....don't say me this ...I'm trying for 12 years and all common electronics is just a crap. Investigate the Ismael Aviso case. Give me mosfet able to switch 1000V a 1000A and do not heat up and some diodes and capacitors and all is solved

this is a good news in my opinion we need a source of Reactive resonant electric current , this is your wattles electric power subject to amplification... after that it's easy to convert it

this is the circuit i am working with !





in the coil number 4 you have reactive power hundreds of time more than the input power, the circuit is a modified SMPS, what do you think ??

[boguslaw]

[QUOTE=med.3012;315693]

we still need a lots of effort .... we need a well designed timing circuit which isn't easy to do without skilled person in electronic ...

YEAH....don't say me this ...I'm trying for 12 years and all common electronics is just a crap. Investigate the Ismael Aviso case. Give me mosfet able to switch 1000V a 1000A and do not heat up and some diodes and capacitors and all is solved

[med.3012]

[QUOTE=boguslaw;315527]

I like the progress here! We have to figure it out before some guys lock free energy bg some commercial project of sending energy by Zenneck waves which woul make world even worse the it is today. Now if charges react to this waves you find the capicitace kmportant in tha aspect Edwin Gray notest talk about electrostatic charge every where around 😏 and Don Smith strange connection of coils and diode bridge may be just to discharge it to ground

we still need a lots of effort .... we need a well designed timing circuit which isn't easy to do without skilled person in electronic ...

[thaelin]

seeing is believing

I bit a lot more and went to his Lodi CA. workshop. I did see his device show output power rise with every new load he put on it. He is rather harsh on himself but he will not say it or write it if he himself doesn't believe it completely.
I even ask directly on the wind direction of the secondary coil and it is wound only one direction. Not like Zzzz says.

I want to let everyone know, I bit the bullet and bought the Rick Friedrich book. I barley make it through watching his videos (zzzzzzz). But maybe I would bore myself if pressed to talk about the subject. The book ain't cheap, but I don't plan to live forever so I would like to see some results in one lifetime.

I can tell you he reads much better than he orates, and he checks his work with cross references. He used many documents that came from a friend of Don Smith. And took the time to transcribe many of his videos. I already like having it as a resource.

One thing I thought was surprising he uncovers the inaccuracy of Patrick Kelly right off the bat, and says some of his DS content is misleading.

I am not endorsing Rick's book or have any stake in it's sale. Maybe if I build a working device I will feel different. I blow a lot of cash on this subject, so I don't mind dropping 130US to NOT have to hunt the Web for content. Rick might be able to correct some misconceptions for me, so I'll have to wait and see.

[dyatronn]

let me guess... A gaussmeter that measures up to 3.5 ghz, that you have to lay on it's side to measure vertical geomagnetic component of the planet's field.

Lol

you know i'm xrix right? I pay attention, because i don't know, so i appreciate the input from people who do.

Thank you!

Yes, that's it.
In my laboratory, the natural background is weak 0.1-0.3 microtesla (1-3 milligaus). a radius of a few blocks from my location, I found several points in which the activity is from 15 to 97 milligauss.
But unfortunately I cannot install my device there, since I am in the center of the city and I don’t have access to work in these places ...

[ilandtan]

Whatever you waste your time on - acquire a gaussmeter with a measurement step of 0.1 milligauss. It will help find a place for grounding and installation of the device.

Let me guess... a gaussmeter that measures up to 3.5 Ghz, that you have to lay on it's side to measure vertical geomagnetic component of the planet's field.

LOL

you know I'm XRIX right? I pay attention, because I don't know, so I appreciate the input from people who do.

Thank You!

[dyatronn]

I want to let everyone know, I bit the bullet and bought the Rick Friedrich book. I barley make it through watching his videos (zzzzzzz). But maybe I would bore myself if pressed to talk about the subject. The book ain't cheap, but I don't plan to live forever so I would like to see some results in one lifetime.

I can tell you he reads much better than he orates, and he checks his work with cross references. He used many documents that came from a friend of Don Smith. And took the time to transcribe many of his videos. I already like having it as a resource.

One thing I thought was surprising he uncovers the inaccuracy of Patrick Kelly right off the bat, and says some of his DS content is misleading.

I am not endorsing Rick's book or have any stake in it's sale. Maybe if I build a working device I will feel different. I blow a lot of cash on this subject, so I don't mind dropping 130US to NOT have to hunt the Web for content. Rick might be able to correct some misconceptions for me, so I'll have to wait and see.

Whatever you waste your time on - acquire a gaussmeter with a measurement step of 0.1 milligauss. It will help find a place for grounding and installation of the device.

[ilandtan]

I want to let everyone know, I bit the bullet and bought the Rick Friedrich book. I barley make it through watching his videos (zzzzzzz). But maybe I would bore myself if pressed to talk about the subject. The book ain't cheap, but I don't plan to live forever so I would like to see some results in one lifetime.

I can tell you he reads much better than he orates, and he checks his work with cross references. He used many documents that came from a friend of Don Smith. And took the time to transcribe many of his videos. I already like having it as a resource.

One thing I thought was surprising he uncovers the inaccuracy of Patrick Kelly right off the bat, and says some of his DS content is misleading.

I am not endorsing Rick's book or have any stake in it's sale. Maybe if I build a working device I will feel different. I blow a lot of cash on this subject, so I don't mind dropping 130US to NOT have to hunt the Web for content. Rick might be able to correct some misconceptions for me, so I'll have to wait and see.

[p75213]

This may be of interest. http://www.free-energy-info.com/Solovey.pdf