Donald Smith Devices too good to be true

[Solarlab]

Attn: Mr. Townley

Hello Mr. Townley,

Thank you for sharing Mr. Perreault's "disclosure." An interesting paper indeed; including his "Alpha Fusion Electrical Energy Valve" patent.

It jogged my recollection of a statement I read in a paper entitled "The Double Helix Theory of the Magnetic Field" by Fredrick David Tombe dated 15th February 2006; (page 4 bottom & page 5) quote:

... "The electron-positron sea will be refered to as 'The Electric Sea', in order to distinguish it from the pure aether itself. The electric sea will therefore be somewhat reminiscent of the striking surface of a safety match. If we disturb it in a particular way, it will cause an ignition of energy."

Tombe's paper can be found here:

http://www.gsjournal.net/h/papers_download.php?id=252

F.Y.I. - Other interesting and informative writings are available from the General Science Journal at: Science Journals - Authors Scientific Papers with more from Tombe at: Science Journals - Papers written by Frederick David Tombe .

Thanks again and send my best regards to Mr. Perreault when you next chat.

SL

[tswift]

Good, looks like you're making progress! Although, in my experimenting I have had very limited success with those GDT's used like that. They tend to just light up like a neon tube in a steady glow (and get very hot) instead of operating in discrete sparks at a high frequency. I'm assuming there's a coil across the cap out of frame in the first picture, you should see on the scope a short burst of noise at the peak of each AC waveform, that's the spark happening and the coil ringing. If you adjust your trigger level to trigger at the noise burst and then zoom the timebase in you should see the coil/cap ringing frequency. If you then zoom in several steps further you should see the coil 1/4 wave ringing frequency at the very beginning of the spark pulse.

[tesluh]

trying to get my primary side firing with a high frequency nst and using the ground wire was not doing anything so I dug into the case and attached directly to the center tap of the secondary, finally have a firing spark gap using both outputs together with a diode on each.

[soundiceuk]

If you'd studied the material I've presented in some detail you may realise that I have made a disclosure. Does it give an A-Z of how to build? No, that hasn't been made.

We cannot put all cards down on the table as the establishment would use it to their advantage to enslave us further and squander the materials.

Instead we've opted for a slow release.

One of the members who I've been in touch with for a few years has offered to demonstrate the device in the USA at a location that will be easier for it to be viewed.

I'm definitely looking for attention and there is definitely an agenda behind the 1000 likes. It is marketing the theory to anyone who is interested.

It is a build up to something very big!

It might even get me killed off but I'm beyond caring about that. That's how dedicated I am to the cause.

Think what you like... I'm just going to carry on.

1000, 2000 or 100 likes or whatever I'll release it privately to the people that supported the tech.

I am in touch with a lot of people about this and I answer all their messages.

I was reluctant to post anything here but I'm glad I did. Some real cool new faces have emerged and also some cool old faces.

Anyway I'll leave you to carry on with dead end Don Smith devices that are too good to be true! LOL

[jegz]

Hi everyone, I've decided to post this in this thread, as it was this thread that changed my life and ultimately provided me with this information.

A little history.

I came onto Energetic Forum over four years ago knowing very little about energy.

I had 10+ years knowledge of auto-electrics so at least I had a clue.

I found Energetic Forum purely because I was researching Nikola Tesla and I believe it was Imhotep's Radiant Oscillator that led me here.

I joined this Don Smith thread near the start and became obsessed with searching for the solution to our energy needs.

I started my own forum and hand picked replicators and theorists to participate with Don Smiths ideas being the main focal point.

There were some really talented guys in the group. The mains ones that shone were called Dragon, Altrez, Dynatron and Romero. There were others. Sorry if spellings are wrong it's been a while.

I became associated with one of Don's friends. It was through him I was able to produce material which no one else had.

I still have Don Smith material that hasn't been seen here before.

To be honest it's pointless sharing it as Don's friend has finished the puzzle that Don Smith started.

This includes solving what radiant energy is, where it comes from, how to obtain it and how to build a circuit that advances Tesla, Moray and Don Smith's work.

Wardenclyffe was a ion receiver and transmitter using Schumann resonance. It did have a detector and it is missing from Tesla's patent. It is in one of his rare papers. I think very few connected the dots.

Moray's circuit was an ion receiver and not a transmitter.

This is ultimately what Don Smith was working towards.


I appreciate everything Aaron and Peter have done to make this forum what it is. I wouldn't have discovered this information without the Energetic Forum platform to meet the folks that use it.

Soon I'm going to be asking someone from the energy community to come to UK and validate a third party validation of the technology and make footage to be released here.

Names that spring to mind are Aaron, Peter, Eric Dollard or Jim Murray.

There are others but I've not personally followed their work.

I can only do one plane ticket though.

Any of you can think this is BS. I wouldn't blame you. This is why I would like one of those guys to give there expert opinion. Free trip to UK.

All I can say is this is the key we've all been waiting for. The road to powering buildings and transport with radiant energy. This was Tesla', Moray's, Don Smith's and probably the vast majority of your dreams. It is completely mine.

God knows why I'm in this position to bring you this information.
I hope you will join me for the ride.

If you want to get involved please like and share our page.

https://m.facebook.com/Solar-Energy-Generator-Electricity-Day-Night-1810427302531276/

Once the page has received 1000 likes. Photos of a fully constructed unit will be revealed.

There are a few teaser shots on the page.

The technology will be validated LIVE on Facebook with one of the above names or someone else highly regarded.

Let me know if you are interested in replicating by PM and I will send you the theory, circuit diagram and components list.

Best regards to all,

Paul Townley
Plymouth, UK

Why not just save your ticket money and borrow a leaf from Clarence. Make full disclosures and let whoever believes take it up...based on experience the people who make such claims on forums to "release after 1000 likes" are looking for attention or have an angle theyre working

[med.3012]

Totally agree. The comfort zone never did us any favours. Keep an open mind, do the research and on the bigger picture too. There is an advert at the top of this page for Bedini, that all started with a school girl kit. Maybe we are past that but any new breakthrough needs us to focus together or we miss out.

Totally agree..

[Jon_sparky]

I must say I'm surprised with everyone here. A long-time forum member comes on with claims that he knows more about this technology than we do and nobody is interested or considers it worth their time to check it out? ... The third student? The third student called his mother.

...My point is, if someone knows more than you then the fastest way to gain knowledge is quit talking and start listening and learn from them....

Totally agree. The comfort zone never did us any favours. Keep an open mind, do the research and on the bigger picture too. There is an advert at the top of this page for Bedini, that all started with a school girl kit. Maybe we are past that but any new breakthrough needs us to focus together or we miss out.

[soundiceuk]

The reason would be that this long time member has claimed many things for a long time. Please study his threads on this forum.

Apart from the 1996 Symposium videos I supplied most of the Don Smith material for this thread.

I'm not asking anyone for anything and freely giving my time and energy for the better of humanity.

I'm offering proof too!

Did Zilano, Stroker or anyone else do this?

Personally I think I've saved you all a big slice of time by investigating thoroughly and drawing a conclusion that Don Smiths devices were too good to be true!

Not only that I've found you all the solution!

Also what you don't realise is I've got more material but why should I share it when I'm getting slagged off for helping!

The reason why is because I'm a good, honest, reliable, caring individual.


The near future will prove my intentions.

[tesluh]

Looking at flyback related stuff I think the voltage will be too high for what I need, not sure what their range is but I have been looking here at the pvm12 like tswift has or the one p.n. GRADRIV10 on this page Power Supplies - High Voltage, High Frequency

They both sound purpose built for circuits like this and with built in oscillator and voltage adjustment freq adjustments they might eliminate the need for things like inverter, voltage controller and adjustable capacitors. Sounds like battery to driver to lc tank circuit/spark gap for the primary side of the device. Could it be that simple?

[med.3012]

unless they made it different for him than they do in production, the one on his board is an active part number just none in inventory. rep said 9 weeks lead time.

Not saying having the exact parts will bring instant success, just saying I don't even have a functioning primary because my power supply doesn't work with the circuit its attached to. I would have no problem using a tv flyback, was also looking at amazing1.com selection of hv hf power supplies like the one tswift demonstrated.

if i can suggest something here you can build your own Mazilli driver .

[tesluh]

unless they made it different for him than they do in production, the one on his board is an active part number just none in inventory. rep said 9 weeks lead time.

Not saying having the exact parts will bring instant success, just saying I don't even have a functioning primary because my power supply doesn't work with the circuit its attached to. I would have no problem using a tv flyback, was also looking at amazing1.com selection of hv hf power supplies like the one tswift demonstrated.

[med.3012]

having the same components as Don Smith isn't a condition for success even it's good option, this is why he talked about fly back transformer and coil ignition, but when he talked about the primary capacitor he said impossible to find !

[tesluh]

the exact p/n capacitors Don used on the primary are supposedly only a 9 week lead time and having them made doesn't sound difficult. I found a different part number that I think is similar in stock and have them on the way. 5000wvdc instead of 4000wvdc rating. KMS1A502104K instead of CMR1A402104K.


If anyone has a source for the exact hm106nd "neon power supply" as in this video please post. I am trying this circuit with other styles of high freq high volt nst and no luck yet getting it to spark the gap. Also I have the big storage capacitors but not sure if they are the right construction. If anyone has a source for those oil filled blue storage caps (8uf at 2000v times 4 I believe)please post.

[VIDEO]https://www.youtube.com/watch?v=43hted5YTCw[/VIDEO]

[med.3012]

@soundiceuk



first of all thank you very much for the audio file, it's interesting and it prove Don Smith was correct but unfortunately very few understood his words !

a member here posted a good information about EH antenna, a type of strong antenna where the size is very small compared the hertzian ...

in other words the EH antenna benefit from the movement of electrons around itself NOT around the conductor, this allow a perfect interaction between the magnetic and the electric field, this is the electron spin interact directly with the ambient back ground energy .. the system can't see this movement because it's a multi dimensional transformer.

this is what allow this device to replicate the power with radio frequency speed, how much power can be obtained is limitless at least theoretically !!!

the first must to have condition is to work with an OPEN SYSTEM this mean we have to have a ringing condition, or a natural resonance inside another resonance initiate the phenomena . At this point you still have a kind of reactive power , to transform this power into active we must combine the capacitor ( electric side ) with the coil ( the magnetic side ) in just one device ! if this is possible ( it's possible ) we could transform the generated reactive power into real active power with easy ! we have to remember Don Smith words about the capacitor that impossible to find .


his device work as a rotating permanent magnet where the coil work as transmitter / receiver, the puzzle can solved pretty easy if we take into consideration the ability of electron to change the spin direction, this allow the N pole to be S pole without moving anything ! the receiving side have to be a capacitor inside a coil so you can duplicate the power ...

there's a lots to tell even in L2 side ...

[SlickDick]

I must say I'm surprised with everyone here. A long-time forum member comes on with claims that he knows more about this technology than we do and nobody is interested or considers it worth their time to check it out?

The reason would be that this long time member has claimed many things for a long time. Please study his threads on this forum.