ReGenX Coils and ReGenXtra switching

[BroMikey]

This is how your BASIC COIL will accelerate under a load and
at the same time send power back to the source.

Let me say that again. We first must understand the basic coil
being used as both a motor and generator coil.

Thane has done that for years. Here he is. If you missed this, you
missed the boat completely. Before that Thane had already
explained how his BiTT transformers used Permalloy cores with
coil winds that are 3X-5X more copper mass.

This is the ReGenX coil theory, reactive power operating at
a certain resonant perimeter so as to reflect motoring energy
back to source and around again without the use of high
tech circuits.

The ReGenXtra uses these coils AND switch recovery circuits but
for now let's not talk circuits until we understand the Basic Coil.

This is so simple it is stupid. HIGH IMPEDANCE COILS,YES?

All I asked is 8 minutes of your time .

it is a "BASIC COIL" acting AS a Capacitor.

This brings about a phase shift or delay if you will.

The "Critical minimum frequency" is a function of the coil
perimeters and can be derived through experimentation.
This will give your desired RPM at that HIGH impedance value.

The coil stores energy in the ELECTROSTATIC not ELECTROMAGNETIC.

[VIDEO]https://www.youtube.com/watch?v=5osYN5f35Bc[/VIDEO]


[VIDEO]https://www.youtube.com/watch?v=7y89nMe7AGE[/VIDEO]




Patent US20140111054 - Generator and Improved Coil
Therefor Having Electrodynamic Properties - Google Patents



In 2008 eight years ago Thane gave us the answer on how to
build a motor coil to accelerate under a load.

For those who didn't catch basic highlights due to the amount of
posted information, let me point out that the waveform for
"THE BASIC COIL" for accelerating the motor under a load
was freely given without malice. Thane is a great man.

In this entry I am showing you a short video where Thane
explains the ReGenX waveform JUST as he had done with
his transformer coils.

This revelation has been freely shared with everyone.

Also the Patent from 2008, just so we all know where these
effects came from and who had originally delivered them into
the public domain.

I will be back to cover the basics until I am satisfied that everyone
understands the principle. Conventional coils in conventional
motors have ohmic resistances of .3 or .5 , however when using
coils to operate them to store "ELECTROSTATIC energy we do not
use conventional coils.

Conventional coils are based on coils storing energy in the
electromagnet field. Tesla always spoke about coils having
capacitance but what most miss is that the fields Tesla operated
were not always electromagnetic.

Also look at the phase delay or delayed Lenz in the BiTT.

[BroMikey]

10. The coil of claim 9 further comprising a step up or step down transformer.
11. The coil of claim 1 further comprising Flux Harvesting wherein, when operated as a plurality of salient or independent coils, subject to particular positioning of the coils, the discharging flux from said coil is collected into adjacent generator coils resulting in net additive flux in the coils, including the rotor flux plus the induced flux from other coils
12. The coil of claim 2 wherein the impedence of the coil is in the range 1-10 OHM

13. The coil of claim 2 wherein the impedence of the coil is in the range 10-100 OHM
14. The coil of claim 2 wherein the impedence of the coil is in the range 100-1000 OHM
15. The coil of claim 5 wherein said bi-filar windings increase coil impedance and self-induced capacitance in the range of 1-10%.
16. The coil of claim 5 wherein said bi-filar windings increase coil impedance and self-induced capacitance in the range of 10-100%.


17. The coil of claim 5 wherein said bi-filar windings increase coil impedance and self-induced capacitance in the range of 100-1000%.
18. The coil claim 11 further comprising a ReGen-X coil adjacent to a motor coil such that the discharging magnetic field from the motor coil is collected in the ReGen-X coil to reduce the net power consumption by the motor coil.
19. The coil of claim 3 wherein the inductance of the coil is increased by an amount effective to modify the magnetic force between the coil and stator magnet in the range 1%-10%
20. The coil of claim 3 wherein the inductance of the coil is increased by an amount effective to modify the magnetic force between the coil and stator magnet in the range 10%-100%

[BroMikey]

Claims(20)
I claim:
1. A generator having a resistive coil wherein said generator is capable of exhibiting acceleration under load.
2. A generator coil according to claim 1 comprising sufficient inductance, impedance and self-induced capacitance when operated at a sufficient frequency to, in the regions prior to TDC, disallow current to flow in the coil and store energy externally around the coil in the electromagnetic field as an inductor, but will force the coil to store useful energy internally in the electrostatic field capacitively until substantially the moment of TDC wherein this maximum internally-stored energy is released as a magnetic field of identical polarity to the receding rotor magnetic field with substantially its full instantaneous force being exerted upon the magnet pole.


3. The coil of claim 2 further comprising at least one wire winding of relatively reduced gauge selected to increase said sufficient inductance, impedance and self-induced capacitance and wherein the coil turns ratio is increased substantially in proportion to the decrease in wire gauge
4. The coil of claim 3 wherein the inductance of the coil is increased by an amount effective to modify the magnetic force between the coil and stator magnet by at least 1%
5. The coil of claim 2 wherein said disallowing of current to flow is achieved by employing bi-filar coils and while substantially maintaining the prior art DC coil resistance, wire gauge and turns ratio
6. The coil of claim 4 wherein said inductance of the coil forms a tuned circuit with the capacitance of the coil causing it to become self-resonant.


7. The coil of claim 2 wherein said stored electrostatic energy is released to be exerted upon the stator magnet pole at substantially the 45 degree mark
8. The coil of claim 5 further comprising different modes of operation which can be employed at any time and in combination with a plurality of coils via electronic or manual switching of different coil configurations.

number {9} nine= Coil modes of operation

Parallel wound, parallel connected bi-filar wound motor coil.
ii. Parallel wound, series connected bi-filar wound motor coil.
iii. Parallel wound, parallel connected bi-filar wound conventional (system decelerating) coil.
iv. Parallel wound, series connected bi-filar wound ReGen-X (system accelerating) coil.
v. High Impedance ReGen-X coil.