Announcement

Collapse
No announcement yet.

ReGenX Coils and ReGenXtra switching

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BroMikey
    replied
    Looking at the Performance video above and also the patent
    we can see that one set of coils is placed further away from
    the rotor as a depiction of a delayed lenz when in fact both
    distance and coil length are a more complete duty list to
    delay maxium armature reaction at TDC.

    Look at the shape of the core material, what do you see?
    I see and irregular shaped core that is probably made from
    a Permalloy that has a low response rate but never the less
    higher than iron.
    And not one pole only but two poles.




    Last edited by BroMikey; 01-28-2016, 12:16 PM.

    Leave a comment:


  • BroMikey
    replied
    It is important to look at this performance test of a coil
    set. Coil set meaning a spool that is wound having one
    low impedance wind and one high impedance winding.

    The beginning of this test shows a phase shift that I
    say is associated reactive power factors. Almost 90
    degrees means you multiply by .2 but this applies to
    other calculations.

    After we look at these numbers long enough it will become
    clear what Thane is showing us about coils that assist
    rotor torque while reclaiming huge amounts of energy
    back to source.

    [VIDEO]https://www.youtube.com/watch?v=qh2YnHelZSs[/VIDEO]
    Last edited by BroMikey; 01-31-2016, 01:06 AM.

    Leave a comment:


  • BroMikey
    replied
    For a better look at the numbers for recycling power look here.
    Demo 1 & 2 are very clear for those who have a mind to see.


    [VIDEO]https://www.youtube.com/watch?v=IgHFhNMkDiw[/VIDEO]


    [VIDEO]https://www.youtube.com/watch?v=SCRx9MW-a7M[/VIDEO]

    Leave a comment:


  • BroMikey
    replied
    Originally posted by barbosi View Post
    In case you missed the thread, here is all you need to let go of not only 7 years but 100+ years of old news:

    http://www.energeticforum.com/284778-post9.html

    Regards.

    PS: That is because I could not pass one minute on first clip, without noticing the high voltage coil is receded on the core, as compared to the low voltage core, Read that post and you'll understand. Or not.
    Hello barbosi

    I am new at this and will consider your entry. I also found this
    old video. What do you make of this one? These are beginners
    tests and the basis for a new invention.

    BTW thanks for the CAPTOR system patent work.

    [VIDEO]https://www.youtube.com/watch?v=F_DApU2ApXc[/VIDEO]

    Last edited by BroMikey; 01-28-2016, 07:42 AM.

    Leave a comment:


  • barbosi
    replied
    Originally posted by BroMikey View Post
    7 years ago Thane started testing with 2 MOT
    (Microwave Oven Transformers)
    In case you missed the thread, here is all you need to let go of not only 7 years but 100+ years of old news:

    http://www.energeticforum.com/284778-post9.html

    Regards.

    PS: That is because I could not pass one minute on first clip, without noticing the high voltage coil is receded on the core, as compared to the low voltage core, Read that post and you'll understand. Or not.
    Last edited by barbosi; 01-26-2016, 10:59 PM.

    Leave a comment:


  • BroMikey
    replied
    7 years ago Thane started testing with 2 MOT
    (Microwave Oven Transformers) one coil being 100 turns
    of 14awg wire and the other he calls a high voltage coil.

    In later work he calls normal hand wound coils high voltage
    coils since the wire selected is a small gauge wire that is very
    long sometimes 1000's of feet long.

    I like these video's because this was one of his beginning
    video's and shows me how to get started with a few simple
    tests.

    [VIDEO]https://www.youtube.com/watch?v=vaf9v0K-rZw[/VIDEO]


    [VIDEO]https://www.youtube.com/watch?v=yhPUlunwhPk[/VIDEO]


    [VIDEO]https://www.youtube.com/watch?v=eU8OU9v56ck[/VIDEO]
    Last edited by BroMikey; 01-26-2016, 10:55 AM.

    Leave a comment:


  • BroMikey
    replied
    Regenerative acceleration capacitor test voltage measurement
    under a load.

    [VIDEO]https://www.youtube.com/watch?v=d5cdhOmwofI[/VIDEO]


    [VIDEO]https://www.youtube.com/watch?v=SHJOwjQV1lw[/VIDEO]

    Leave a comment:


  • BroMikey
    replied
    Originally posted by Turion
    BroMikey,
    You should understand.
    I LUCKED into something with the 3BGS setup.

    But then I think about how important it is that some of this stuff get out there. And the necessity of that is way bigger than any one of us.

    Dave
    yes, I agree, you are not alone, these others you talk about
    have great gifts and are given to help. Their answers are way over
    my head in most cases. It takes money to do anything but to
    me money is the cheapest thing you and I will ever have. If you
    can learn something, that's much better than just mounds of
    gold.

    Keep up the good work. Oh yeah, one more thing before I go. You
    state that your system is a product of luck and how others gave
    to you to help your work on the project.

    This gift is called a "PROJECT MANAGER" the project manager is the
    grease in the wheels of progress, without him the ship sinks.

    Leave a comment:


  • BroMikey
    replied
    Exactly, you don't need much recirculated energy to keep
    that battery up with all of the energy per stage. I can see
    it getting clearer. You know what I think?

    I think that anyone (such as yourself) who has given themselves
    to motor gen setups, for any length of time will have their own
    explanation about why but in the end we will see some common
    denominators. Like longer coil winds and high impedance values
    that facilitate/assist rotor torque when loaded at the proper
    resistance values for optimum results.

    I like listening to you in video and I have been thinking about
    using some of these small magnets to check out an idea I have.

    As you know we are building a MadMack rotor right now so other
    magnet rotor trials will come in time, yet that doesn't stop me from
    seeing clear.

    The added 3 battery splitting the positive is a nice added feature
    for these motor gen systems and I would love to try one with
    a cordless drill motor and some small 3.5vdc Li-Ion batteries or
    some other lead acid batteries I have rated at 5ah.

    People should go with what they have and get themselves stirred
    up, like you have been doing for the past decades. In the end is
    like you say, the experimenters getting their hands dirty will get
    all of the honey. Look at Thane.

    I know how people view Thane, like he is some sort of simple Simon
    parroting robot with monotone voice and mechanical limbs, i see the
    way he comes off. Hey that is what he knows we need, we don't
    need a rookie trying to make a name by dazzling displays of deliberate
    confusion, Thane is right on with his method of teaching.

    And so are you Dave, I don't detect an oz of selfish arrogance in
    your delivery either, Marc B. same same. People may misinterpret
    a message in the video form as heady only because they are and
    this is what they expect others to do. You are a leader by example
    or not one at all.

    I am a good judge of character. Look at Gerard he can be a pain
    to listen to but he still means well, trying to help and this can be
    seen by those who look.

    Now back to your beginnings. I picked that beginning video because
    many will identify with it. Sure it was only one step in the evolution of
    your designs. I think they all are worth repeating as a means to
    get those on board who desire a system.

    How many designs are there on youtube or the web with a DC brush
    motor powering a rotor full of nice neo's right past some hand wound
    coils? My My, literally hundreds. The people are advancing the true
    science, they are tired of the tricks and fakes.

    Your generator has super magnets, big rotors, nice coils all powered by
    a tiny scooter motor, that should be an expected norm for a serious
    experimenter, such as yourself. That's not to much to ask, and when
    the rotor and bearings are mounted the fun begins.

    I can't wait to try it in the future. Thane and guys like you have me
    so cranked up that I can taste the success already. It's guys like you
    Dave that inspire the majority. I am looking forward to greater things
    from your new advanced rig.

    The other guy helping you makes your team a winner too.
    Last edited by BroMikey; 01-25-2016, 08:59 AM.

    Leave a comment:


  • BroMikey
    replied
    Originally posted by wantomake View Post
    Bromikey,
    Very interesting thread dude.
    Hello wantomake

    The only other material you will find to look at is THANE'S BiTT and
    I am sure you know that this is a transformer. Look for the 90
    degree phase shift that ia part of Engineering calculations
    called power factor.

    Reactive power is what we want.

    Okay let me speak to everyone now. The chatter about BASIC COILS
    and Free Energy Coils coming from the young boys is almost funny.
    In one example the posing authority on running motors as generators
    says that Thane has a small brain because his runs in phase on current
    to voltage. Then later comes back and changes what he said stating
    that the phase shift is an important finding of his when all of these
    roads have been crossed long ago.

    Yes what Thane is doing makes sense, yes Dave you are right to use
    a conventional motor as the prime mover. Yes, Yes, Yes!!!! Yes because
    all conventional devices using a motor are already setup to do a job
    whether it be an electric car or an electric mixer.

    What kind of a clown thinks that men like THANE are stupid and that
    he doesn't have a self sustaining device worth a penny? You got it
    a hard head who is out to prove to the world his is better than anyone
    has ever dreamed and stops at nothing to steal another man's
    invention.

    John Bedini said that 30 years ago and he was right then.

    Thane can run electric vehicles at multiple COP'S just like Turion
    has done with his machines. AUL or Acceleration Under Load is
    the opposite of deceleration Under Load or DUL.

    It's that simple.

    Anyone wanting to run a Motor Generator into a great COP, talk
    to him as he has a model for a few bucks that proves out the
    entire Mo/Gen thing.

    John Bedini did the same thing, he used a conventional motor in
    his beginnings doing high COP's and later the motor and Generator
    coils worked as one, but whenever high COP's were realized separate
    generator coils were placed all around his motor. So basically he
    built a motor coil that was wired up to recover energy easily and
    then the larger generator coils populate the remaining area around
    the motor.

    Always 2 separate systems.

    I have considered doing Turion's experiment first as an inexpensive
    proof that higher than 1 COP's are easily reached.

    Dave is the only one on this forum that knows what he is talking
    about first hand and has the machines to prove it. Plus youtube's
    a video of it working.
    [VIDEO]https://www.youtube.com/watch?v=nbEZuRTFZN8[/VIDEO]

    Thane is the same way.


    [VIDEO]https://www.youtube.com/watch?v=nYOD8H63I28[/VIDEO]


    [VIDEO]https://www.youtube.com/watch?v=KTH23w7p1OA[/VIDEO]


    [VIDEO]https://www.youtube.com/watch?v=E33sISiyT3s[/VIDEO]
    Last edited by BroMikey; 01-25-2016, 04:10 AM.

    Leave a comment:


  • wantomake
    replied
    coil build

    Bromikey,
    Very interesting thread dude.

    I missed the boat totally when Thane Heins came out with this. I want to study the replication of this coil, this regenx coil to test on a setup I have being working on lately.

    The bifilar parallel part I get, but is this connected as the Tesla pancake coil is or am I still missing the boat.

    Or if you can direct me to the earliest thread on the replication of the coil would be great.

    Thanks,
    wantomake

    Leave a comment:


  • BroMikey
    replied
    Originally posted by Bertoa View Post
    @BroMikey. Thanks for this great thread. It is exactly the theme I am exploring in my test setup. I choose for a linear motor/generator to make the process more clear. I follow your claim 2: Parallel wound, series connected bi-filar wound motor (and generator) coil. The change I made was to use an assembled 'rotor' magnet. Which means I glue'd 2 magnets in repulsion together. The effect this has at the generator and motor coil I have still to investigate. Till now i have to note that with the repulsion magnet, the resonator 'falls' in a stable 'high' resonance of 20Hz; at the same time the input current sinks with a third.
    This video of today shows the behavior of the magnet and pickup coil.
    [VIDEO]https://www.youtube.com/watch?v=MCP3gDmouKY[/VIDEO]

    WOW, yes much more to gain. Thank You also and please post all of
    your work here. I thought I was the only one who wants to push
    strong magnets together in cancellation to flip their polarity with a
    small input. I like your way very much

    What I have been thinking is to use some NEO's (Like you did) AND
    some RUBBER magnets AND some CERAMIC magnets to stack them
    also using spacers, also using thin pieces for shields to push the
    field around to the pushing pressure is on the verge of flipping
    the polarity so I can use a small coil spike to TRIP the magnetic
    FLIP that would instantly return to normal after the spike from the
    coil collapse.

    The idea came from JOHN BEDINI the koolest guy on the planet.

    Show me more, I love it, this is the right way.

    Leave a comment:


  • Bertoa
    replied
    @BroMikey. Thanks for this great thread. It is exactly the theme I am exploring in my test setup. I choose for a linear motor/generator to make the process more clear. I follow your claim 2: Parallel wound, series connected bi-filar wound motor (and generator) coil. The change I made was to use an assembled 'rotor' magnet. Which means I glue'd 2 magnets in repulsion together. The effect this has at the generator and motor coil I have still to investigate. Till now i have to note that with the repulsion magnet, the resonator 'falls' in a stable 'high' resonance of 20Hz; at the same time the input current sinks with a third.
    This video of today shows the behavior of the magnet and pickup coil.
    [VIDEO]https://www.youtube.com/watch?v=MCP3gDmouKY[/VIDEO]

    Leave a comment:


  • BroMikey
    replied
    In this diagram are 2 systems that are over charging the battery
    while accelerating under a load.

    The meters show excess recovery. The PWM drive also is a flyback
    or a recovery upon coil collapse circuitry. The ReGenX coils are
    doing their job also but it is interesting to note that the motor
    coils energies are being harvested at the same time the circuit
    powers them.








    [VIDEO]https://www.youtube.com/watch?v=iPMSbMsYri8[/VIDEO]


    The ReGen-X DC EV Motor/Generator provides 100% continuous battery recharging capabilities in ALL 4 modes of operation from greater than 0 RPM in Motor Mode, Regenerative Acceleration Mode, Regenerative Braking Mode and KERS Mode - battery recharging while vehicle stopped. It can be added to ANY existing EV to increase vehicle performance, range and battery life while reducing battery weight, cost and recharge times.

    Leave a comment:


  • BroMikey
    replied
    In this diagram I have shown the full setup as always for
    your understanding on the subject. The diagram and the video
    are the creation of a man we all know and have come to
    respect for his practical applications.

    Many content that other ways of harvesting energy can be
    accomplished, this is one of the many tests to be done in
    the evolution of our understanding of the BASIC COIL
    functioning in both modes.

    Here you will see one of the 6 generator coils wound to a
    high impedance, acting as a motoring coil with the other
    5 coils left to function as usual.

    I think this might be the first step away from using high
    impedance coils strictly for generating and yet be harvesting
    energy from the motoring coil while it powers the vehicle.

    You might think of the single motoring coil as a boost coil that
    accelerates the EV from 55 mph on up to 70 MPH, a sort of
    passing gear mode.

    Again another practical application to attract the people who
    need something that is more than speculation. In other words
    the big money wants to know what it can do, not so much the
    terminology of a new idea that only the inventor sees.

    It works, so let's work it and from there improve it by adding
    another dreamed up idea. Don't underestimate the power of the
    dreamer.

    Many people around the world have no idea what the setup in
    in this video is, I do, I understand the man perfectly.

    One motoring coil along side of the main EV DC motor and the
    rest of the high impedance coils (5) are acting as ReGenX coils.

    Watch the meter as the switches are thrown.







    [VIDEO]https://www.youtube.com/watch?v=WxGPUZudVh8[/VIDEO]


    Powering a Scooter
    [VIDEO]https://www.youtube.com/watch?v=AkK2RsApWZE[/VIDEO]
    Last edited by BroMikey; 01-17-2016, 09:55 AM.

    Leave a comment:

Working...
X