None Electrolytic Splitting Of H2o

[superman9976]

Yes I have seen the item in person, it is an electric generator that works on gas in the toroid, "H1 H2" in a magnetic environment.

Mike

So does it have a 110 volt transformer driving the gas pump and is the gas just pure hydrogen or a combination of oxygen and hydrogen? When this copper coil was filled with gas did it get pressurized to say about 60 psi? This gas pump then in turn circulates the gas through the copper coil and as it passes each coil there is a voltage induced. These coils are wound for voltage and frequency I would think so cw wound for oxygen's resonant frequency. There are two coils in the middle then one smaller then the other it looks like. These are there to create a magnetic field and block the amps? Does this make sense or am I way off? I wanna figure out the theory behind it so it will be easier to build. I know there are other toroids and other devices that go along with it but I am just focusing on the one with the gas pump for now.

If I still had a paypal account I could donate a little more cash but they mistreated me on a transaction and wouldn't work it out with me even though I sent all the proof I had. They don't treat sellers fairly anymore. Buyers have all the power. Sorry. Yeah thats really heart wrenching to have your child hurt that bad. Its never supposed be that way. Your kids are supposed to take care of you some day not the other way around. I recently went to a benefit for a child that was found to be diabetic after he had a cerebral hemorrage. Now the kid has brain damage and is in a wheel chair. I used to see that kid run around and just have fun like a kid is supposed to but who knew this was gonna happen.

Chris

[Michael John Nunnerley]

Pic's

Yes I have seen the item in person, it is an electric generator that works on gas in the toroid, "H1 H2" in a magnetic environment.

Mike

[Michael John Nunnerley]

e-beam and my son Mark

Hey Mike sorry to hear about you son. I will purchase one of the vids from Aaron to help you with some fund raising.
I am wondering if you ever messed with these toroids of meyer design. Have you seen them? I never knew what these looked like until recently.
Why are we not talking about these? How they work, how to build, this is what we are all after.

pics available here:

Index of /rwg42985/russ

Under stanley meyers epg high quality pics

Chris

Thank you, my work had to come to a stop for a while, but now I am having to slowly start again and make some money as the only person in the family that makes money is my wife.

E-beam has had to be turned into a commercial development, not what I wanted but I have to get income from somewhere. E-beam is very very real which involves a lot of my past and present work.

I will maintain full control of this, and it will not be assigned to one single entity, I want it to be available to all and at a reasonable price.

E-beam one day might be the molecular convertion reactor that powers both your home and your car. It does not have to be big as a small one can be powered from solar during the day and the gas produced compressed and used at a later time, the primary gas that I am working on is methane, but also ammonia can be made. Compressing is not a problem, there are many taxi's and buses using natural gas today which is compressed into cylinders in the buses and cars at the time of fillup.

Money is the problem for me at the moment as Mark, my son, comes first, "hospital fees are 10,000 euros a month", this will be recovered from the insurance of the driver I hope, but that is going to take up to two years in the courts to get it back, and I am nearly 61 years old and Mark 16 years old and may have to have perminent help for the rest of his life (you see the problem).

If anybody wants to give a direct donation they can make it via paypal at [email protected] and mark it "Marks fund", it will all go to helping him now and in the future.

Thank you in antisipation


Mike

[superman9976]

Hey Mike

Hey Mike sorry to hear about you son. I will purchase one of the vids from Aaron to help you with some fund raising.
I am wondering if you ever messed with these toroids of meyer design. Have you seen them? I never knew what these looked like until recently.
Why are we not talking about these? How they work, how to build, this is what we are all after.

pics available here:

Index of /rwg42985/russ

Under stanley meyers epg high quality pics

Chris

[Majestic81]

what is the status?

I am still interested in knowing more about your working prototype.
Any pictures or vidz of it working?

What is the status of the E-Beam project?

Greetings,
Raymundo

[ZeroMassInertia]

Francis E. WILKINSON -- High Frequency Transformations

[bhaas]

If one were to make this device with a 600khz transducer and the water starts boiling, would it blow apart?

[superman9976]

I too am interested in anymore plans or information that can be shared. I am reading about RF design and concepts. I know its difficult to work with when I don't have enough experience. Does the circuit need to be continually tuned or adjusted once its built? Like a dial to tune the inductance? Or is it all solid state once the impedence matching is done? I don't expect to receive all this information for free as far as plans I am willing pay for it too just so you know.

Chris

[Majestic81]

How much BTU at which PSI does NH3/N2O have?
You mentioned to use 200 Watts as a starter, is the reaction self-substainable after this?
How much are you getting out of the reaction process in KW/efficiency %?
Do you still sell these plans and do these plans contain the whole design, with parts-list so I can build a workable prototype myself?
Do you have any vidz or pictures of your protoype?

Greetings,
Majestic

[Majestic81]

You already debunked the reason for splitting the NH3 and N2O.

I would really like to produce the reactor described in this thread, but I guess we all have to wait for the knowledge to be shared in detail.

[tutanka]

Has the reactor have the ability to separate the NH3 and N2O?
I wouldn't want the N2O, due to technical issue's modern cars are heaving with additional O in the burning process and adding more fuel to the mix. (I don't want to use a Volo (EIFA) device.

On-demand H2O drycel already have working design of having 2 outputs (pure hydrogen and oxygen)

Why you want separated NH3 from N2O? You obtain an good stechiometric fuel mixture that burn with only 0,07mJ of activation energy. Differently from hydrogen/oxygen ammonia and nitrous oxide can be compressed at lot without problems because you have nitrogen as carrier

[wizofid]

It appears that tossing stones and generally stirring is a way of operating for some.

I find it interesting to watch those that run around and blow out "candles", they frantically try to be the brightest, by making them the only apparent light around. The sad fact, is that they are never the brightest, for they soon find themselves as the last!

Having been working on my bike - and getting 20mpg more - on my first 100 mile run, leads me to KNOW that there is truth in this whole subject.

Experiment onwards!

[Armagdn03]

TEN MONTHS Nunnerly, where is it? success stories? Clips/vids etc. lets have them mate
shill, we must but try

http://www.energeticforum.com/renewa...correct-2.html

Why such hostility Karl?

This seems inappropriate. The mechanism was given, the method of accomplishment, even much of the basic parts were outlined. Are you owed more? What have you shared with such certainty?

My fiance's grandparents watch fox news quite often, and I start to wonder, why people would pay attention to other people who seem to radiate anger, and hostility; pretty clear sign of frustrated soul who does does not realize their internal locus of control.

[Karl]

TEN MONTHS Nunnerly, where is it? success stories? Clips/vids etc. lets have them mate
shill, we must but try

http://www.energeticforum.com/renewable-energy/8388-looks-like-h20power-correct-2.html

[tutanka]

Has the reactor have the ability to separate the NH3 and N2O?
I wouldn't want the N2O, due to technical issue's modern cars are heaving with additional O in the burning process and adding more fuel to the mix. (I don't want to use a Volo (EIFA) device.

On-demand H2O drycel already have working design of having 2 outputs (pure hydrogen and oxygen)

You don't need. The sensor don't sniff N2O