"SALES INFO" Essential HHO "Booster" Components

[Redmeanie]

RedMeanie would this be the righ switch I have to order online so I don't won't to make a mistake. Sorry for to many questions.
Thanks

Action-Electronics.com

Switches, Toggle Switches, Rocker Switches, Push Button Switches, Foot Switches

Yes, But here is a guy Ive bought from before and the switch is $5 cheaper:
Miniature 4PDT Toggle Switch ON-ON # M402 - eBay (item 110302313549 end time Oct-27-08 17:03:23 PDT)
He's on eBay but he's a good seller......
And Quality Parts.....

[Bogus Bogart]

One more question

RedMeanie would this be the righ switch I have to order online so I don't won't to make a mistake. Sorry for to many questions.
Thanks

Action-Electronics.com

Switches, Toggle Switches, Rocker Switches, Push Button Switches, Foot Switches

[Bogus Bogart]

Thanks RedMeanie

[Redmeanie]

That would be a 4PDT switch, would it have 12 lugs on it as well?

Yes it would....Wire it like this:

[Bogus Bogart]

That would be a 4PDT switch, would it have 12 lugs on it as well?

[Redmeanie]

Hey RedMeanie can the slide switch that come with the dual efie be replaced with a single toggle switch or two toggle switches, and if so what kind ? We have a small radio shack here.
Thanks
Bogus Bogart

It can....Any reason why? The 4PDT switches are pretty hard to locate and expensive. Radio Shack definitely will not have them. I switched from Toggle to slide because it is less likely to accidentally get switched.

[Bogus Bogart]

Question for RedMeanie

Hey RedMeanie can the slide switch that come with the dual efie be replaced with a single toggle switch or two toggle switches, and if so what kind ? We have a small radio shack here.
Thanks
Bogus Bogart

[Bogus Bogart]

Thanks for quick answer.

Thanks for the help.

Bogus Bogart

[Redmeanie]

I purchased from RevNelson the Dual EFIE kit, assembled with double pole 6 position rotary switch and the Full Hi-Power PWM kit, assembled with all 4 50A Mosfets.
My question is on the efie pcb where U hook up the 6 position rotary switch their is a jumper wire from the center hole to what I think is the leanist hole futherest from the LED, do I need to take this jumper wire out so that I can connect the center wire to common and lean wire, both to 6 position rotary switch ? Sorry for the question but Iam a plumber and know nothing about electronics but I will do the best I can. Thanks

Yes, Remove the jumper and wire up the rotary. The jumper was put there for calibration.

[Bogus Bogart]

Question for RedMeanie

I purchased from RevNelson the Dual EFIE kit, assembled with double pole 6 position rotary switch and the Full Hi-Power PWM kit, assembled with all 4 50A Mosfets.
My question is on the efie pcb where U hook up the 6 position rotary switch their is a jumper wire from the center hole to what I think is the leanist hole futherest from the LED, do I need to take this jumper wire out so that I can connect the center wire to common and lean wire, both to 6 position rotary switch ? Sorry for the question but Iam a plumber and know nothing about electronics but I will do the best I can. Thanks

[RevNelson]

Hello all!

I ordered a full, assembled HHO electronics kit from RedMeanie about 2 months ago--just before he stopped taking orders--and have since moved out of my parent's house. Due to this, I no longer have the garage filled with the tools needed to continue tooling around with this project, and won't for a good while. I'm posting to see if anybody would like to buy that kit from me. I've never used it and the parts haven't even ever been taken out of the little plastic bags he put them in to ship them. The parts are as follows:

Dual EFIE kit, assembled with double pole 6 position rotary switch

Full Hi-Power PWM kit, assembled with all 4 50A Mosfets

These were painstakingly put together by RedMeanie himself, and I'm not going to be able to use them, so I figure I'd put them up here. They cost me $126 altogether with assembly and shipping, and I'll ship them anywhere in the US for $120. I'm not looking to make money off this, just as RedMeanie wasn't. I'm just trying to get the parts to someone who can use them and see no reason I should lose money on it. I know he's got his hands tied right now and can't exactly be making parts for us , so if you're looking for a kit, here's your chance.

Again, these have never been removed from their packaging, and never been around voltage or static electricity in noteworthy amounts.

Please email me at [email protected] with any questions. That's also the email I use for PayPal, but don't send any payment without confirming with me first. I wouldn't want two people to all of a sudden send me money for the one kit I have...

Cheers!

[Redmeanie]

Thanks TuxAir, but the connections.pdf does NOT show which wire from the single efie goes to the ECU. Is it the thin green wire or the thin red wire?

Red - From O2 Sensor

Green - To ECU

[west_beach]

That's an awesome video Ashtweth, but your efie has a brown wire that connects to the o2 sensor. I have only a thin red and a thin green wire.

I don't have a test setup, so that's why I ask. Also there is red goop covering the 2 wires so I can't see which one is the o2 sensor input wire as shown in the pictures.

Nobody else had this question?

[ashtweth]

Does this Video help?
Panacea-BOCAF - Hydroxy Booster Installation Plus - Dyno and Emission Tests

We show the EFIE half way through.

[west_beach]

Thanks TuxAir, but the connections.pdf does NOT show which wire from the single efie goes to the ECU. Is it the thin green wire or the thin red wire?