The Golden Tractate of Hermes Trismegistus applied to electromagnetism

[blackchisel97]

That makes me also think of a PVC but in fluid form and oscillating on particular wavelengths to match those reaching the surface...

Thanks
V

[MonsieurM]

from: http://www.energeticforum.com/psychi...tenna-170.html

just a more recent video :

ps: wonder if you add oil / electrolyte / water .... will it Tesla Patent 685,012 - Means for Increasing the Intensity of Electrical Oscillations



also : Playing loud pop music boosts output of solar panels by 40% > National News > News | Click Green .... Tesla Patent 685,957 - Apparatus for the Utilization of Radiant Energy

[MonsieurM]

Compare these two inventions :



Tesla Has New Pointless Lightning Rod from The Electrical Experimenter, October, 1918 + Tesla Patent 1,266,175 - Lightning-Protector + Tesla Patent 685,957 - Apparatus for the Utilization of Radiant Energy + Tesla Patent 685,958 - Method of Utilizing of Radiant Energy

+

Tesla Patent 613,809 - Method of and Apparatus for Controlling Mechanism of Moving Vehicle or Vehicles

I may state that a contrivance may be used which has long been known and used as a lightning-arrester in connection with telephone-switch boards for operating annunciators and like devices, comprising a battery the poles of which are connected to two conducting-terminals separated by a minute thickness of dielectric. The electromotive force of the battery should be such as to strain the thin dielectric layer very nearly to the point of breaking down in order to increase the sensitiveness. When an electrical disturbance reaches a circuit so arranged and adjusted, additional strain is put upon the insulating-film , which gives way and allows the passage of a current which can be utilized to operate any form of circuit-controlling apparatus.

+

The coil resting on three legs and observed in the immediate foreground is the primary of a Resonant Tesla transformer which collected energy from an oscillatory circuit encircling the laboratory, no matter in what position the transformer was placed

As to the part of my invention which involves the production of suitable waves or variations and the conveying of the same to a remote receiving apparatus capable of being operated or controlled by their influence, it may be carried out in various ways, which are at the present time more or less understood. For example, I may pass through a conducting-path, preferably enclosing a large area, a rapidly-varying current and by electromagnetic induction of the same affect a circuit carried by the moving body. In this case the action at a given distance will be the stronger the larger the area enclosed by the conductor and the greater the rate of change of the current.

Most generally I employed receiving circuits
in the form of loops, including condensers, because the discharges of my high-tension transmitter
ionized the air in the hall so that even a very small aerial would draw electricity from the
surrounding atmosphere for hours


My Inventions by Nikola Tesla Autobiography YouTube - YouTube

[MonsieurM]

based on the previous posts :





note how the wires are placed

+

Thomas Townsend Brown: Scientific Notebooks, Vol 2

Page 93.

For the sake of explanation, let us consider a simple charged condenser (capacitor). If the dielectric constant (wrongly named because it may not be constant) changes, the voltage changes inversely. In other words, the terminal voltage of any capacitor (for a given charge) is inversely proportional to its K (the dielectric constant of its dielectric).

Hence, a section of wire is also a capacitor. The dielectric constant of a metal is theoretically considered to be very high. Any change in its K will affect the terminal voltage of the section. But a current must be flowing for the capacitance effect to be present.

By placing any of the above in an insulating fluid such as oil or carbon tetrachloride (more dense), the force may be increased. Fluid would move in the opposite direction.

Page 116.

In the case of a rotor having sectors of different conductivity, a net circular current (as in [3], previous page), could produce torque on the rotor as a whole. The reaction on an ambient mass (such as oil) or on metallic reactor plates would be in the opposite direction.

Tesla Patent 685,012 - Means for Increasing the Intensity of Electrical Oscillations

[MonsieurM]

It is well known that oils possess insulating properties, and it has been a common practice to interpose a body of oil between two conductors for purposes of insulation; but I have discovered peculiar properties in oils which render them very valuable in this particular form of device, their employment in which has never heretofore and, so far as I am aware, been regarded as necessary or even desirable.

Tesla Patent 464,667 - Electrical Condenser


+

Thomas Townsend Brown: British Patent # 300,311 -- Gravitator

Molecular gravitators made of solid blocks of massive dielectric have given still greater efficiency

Gravitator Action an Impulse ~

Let us take, for example, the case of a gravitator totally immersed in oil but suspended so as to act as a pendulum and swing along the line of its elements.

+

Leon Sprink - Antigravity - patents

a grounded container placed in an electrostatic field. More control and power was obtained with geometric arrays of positive electrodes mounted diagonally from grounded electrodes.

+

Dec. 27, 1957.

In nearly every experiment involving dielectrics and high voltage gradients, the shape of the field is a factor which must be considered.

A classical example is the force exhibited by a dielectric mass tending to draw it into a field (electric) if greater flux density. The force so developed is a function of the dielectric constant of the material. :

Page 87

It is suggested that a kind of memory may be inherent in the dielectric materials under certain conditions, so that, in effect, they may remember the manner of recharging. It appears possible that such memory may persist as long as the charge is retained.

The same characteristic may be present in certain magnetic materials and in a fashion which may be homologous.

Now therefore, it would appear to be desirable to explore these possibilities.

In general, it is suggested that two new forms of memory may be possible:

(1) Dielectric or capacitor memory.
(2) Magnetic or ferrite memory.

Thomas Townsend Brown: Scientific Notebooks, Vol. 1

By charging the capacitor at a variable rate as:



Domain progression. The electric orientation of dipoles proceeds at an irregular rate according to pattern prescribed by data feed. Upon reducing the electric field during subsequent discharge of capacitor, dipoles return to random (discharged) alignment progressively, according same or reversed pattern.

If it is true that tribo-electric generation results from contact potential differences in dielectrics of differing dielectric constant ( ie a capacitor immersed in Oil ) and if it is true that the sliding motion or friction merely extends the effective surface of the dielectrics in contact and if it is true that the dielectric with greater K is always positive and the potential difference is related to the difference in dielectric constant, then it follows that a new type of generator is feasible

Thomas Townsend Brown: Scientific Notebooks, Vol 2.

The possibility of using liquid or gaseous (negative) dielectric should be considered. Such as CCl4, benzene, toluene or transformer oil. A liquid with low elec. resistivity should be considered in order not to limit the current output of the generator.

Both the BaTiO3 and the liquid should have as high electrical conductivity ( electrolyte ) as possible in order to conduct away the charges developed.

Page 56

It will be seen from Figs 1 and 2 that the voltage profiles of dielectric blocks of different resistivity act upon ambient regions of charged oil (ions) to move the body of oil with respect to the dielectric blocks.

Hence, the thrust upon the dielectric blocks, and the oil in the opposite direction, arises from the electrostatic migration of positively-charged oil regions (we may even refer to them as ions).

+

High Frequency Oscillators for Electro-therapeutic and Other Purposes * from The Electrical Engineer, November 17th, 1898


Another equally remarkable feature of high frequency impulses was found in the facility with which they are transmitted through condensers, moderate electromotive forces and very small capacities being required to enable currents of considerable volume to pass.

[MonsieurM]

I think you guys might appreciate this :

Chaotic physics in ferroelectrics hints at brain-like computing

Unexpected behavior in ferroelectric materials explored by researchers at the Department of Energy's Oak Ridge National Laboratory supports a new approach to information storage and processing.

Read more at:

Ferroelectric materials are known for their ability to spontaneously switch polarization when an electric field is applied. Using a scanning probe microscope, the ORNL-led team took advantage of this property to draw areas of switched polarization called domains on the surface of a ferroelectric material. To the researchers' surprise, when written in dense arrays, the domains began forming complex and unpredictable patterns on the material's surface.

"When we reduced the distance between domains, we started to see things that should have been completely impossible," said ORNL's Anton Ievlev, the first author on the paper published in Nature Physics. "All of a sudden, when we tried to draw a domain, it wouldn't form, or it would form in an alternating pattern like a checkerboard. At first glance, it didn't make any sense. We thought that when a domain forms, it forms. It shouldn't be dependent on surrounding domains."


Read more at:

see post on domain here : http://www.energeticforum.com/243334-post3218.html

---------- on a side note :

Phenomena of Currents of High Frequency from The Electrical Engineer, April 8th, 1891

While not directly connected with the present controversy, I would here point out that there exists a popular error in regard to the properties of dielectric bodies. Many electricians frequently confound the theoretical dielectric of Maxwell with the dielectric bodies in use. They do not stop to think that the only perfect dielectric is ether, and that all other bodies, the existence of which is known to us, must be conductors, judging from their physical properties.

[MonsieurM]

based on the previous posts :

what do you think Tesla did (among many many other things )

What is the principle of capacitor?

A device used to store huge amount of electric charge in a small room is called capacitor.

+

Most generally I employed receiving circuits
in the form of loops, including condensers, because the discharges of my high-tension transmitter
ionized the air in the hall ( which is encircled by an oscillatory circuit ... most probably ) so that even a very small aerial would draw electricity from the
surrounding atmosphere for hours


My Inventions by Nikola Tesla Autobiography YouTube - YouTube

The loop form of receiver was not sensitive to such a disturbance
and it is curious to note that it is becoming popular at this late date. In reality it collects much less
energy than the aerials or a long grounded wire,

The coil resting on three legs and observed in the immediate foreground is the primary of a Resonant Tesla transformer which collected energy from an oscillatory circuit encircling the laboratory, no matter in what position the transformer was placed



image from: Tesla Patent 685,012 - Means for Increasing the Intensity of Electrical Oscillations

---------------

What is the principle of capacitor?

A device used to store huge amount of electric charge in a small room is called capacitor.

collected energy from an oscillatory circuit encircling the laboratory

note how the wires are placed

[MonsieurM]

Electrostatic Motor --- Running on a capacitor - YouTube


from: http://www.energeticforum.com/renewa...capacitor.html




btw how many Capacitors / Condensers do you see in Tesla's Set up ....

[MonsieurM]

=

ANISOTROPY


-----------

also

It is well known that oils possess insulating properties, and it has been a common practice to interpose a body of oil between two conductors for purposes of insulation; but I have discovered peculiar properties in oils which render them very valuable in this particular form of device, their employment in which has never heretofore and, so far as I am aware, been regarded as necessary or even desirable.

Tesla Patent 464,667 - Electrical Condenser

Most generally I employed receiving circuits
in the form of loops, including condensers, because the discharges of my high-tension transmitter
ionized the air in the hall so that even a very small aerial would draw electricity from the
surrounding atmosphere for hours


My Inventions by Nikola Tesla Autobiography YouTube - YouTube

[MonsieurM]

shall we continue

An Electrolytic Clock from The Electrical Engineer, May 6th, 1891







+


Tesla Patent 567,818 - Electrical Condenser









replace oil with water or Electrolyte for the armature :


3D Printed Tesla Valve - YouTube

+

Tesla Patent 514,168 - Means for Generating Electric Currents

Be it known that I, NIKOLA TESLA, a citizen of the United States, residing at New York, in the county and State of New York, have invented certain new and useful Improvements in Means for Generating Electric Currents, of which the following is a specification, reference being had to the drawings accompanying and forming a part of the same.
The invention, subject of my present application, is an improvement applicable more especially to the method or system of generating and utilizing electrical energy, heretofore discovered by me, and more fully set forth in Letters Patent No. 454,622, of June 23, 1891, and No. 462,418, of November 3, 1891, and which involves the maintenance of an intermittent or oscillatory discharge of a condenser or circuit of suitable capacity into a working circuit containing translating devices. In systems of this character when the high frequency of the currents employed is due to the action of a disruptive or intermittent discharge across an air gap or break at some point of the circuit, I have found it to be of advantage not only to break up or destroy the least tendency to continuity of the arc or discharge, but also to control the period of the re-establishment of the same, and from investigations made by me with this object in view I have found that greatly improved results are secured by causing the discharge to take place in and through an insulating liquid, such as oil, and instead of allowing the terminal points of the break to remain at a uniform distance from each other, to vary such distance by bringing them periodically in actual contact or sufficiently near to establish the discharge and then separating them, or what is the equivalent of this, throwing in and out of the gap or break a conducting bridge at predetermined intervals. To obtain the best results, moreover, I find it essential to maintain at the point of discharge a flow of the insulating medium, or, in general, such a circulation of the same as will constantly operate to cut off or brake up the discharge as fast as it is established. The accomplishment of this latter result involves the employment of some mechanism for maintaining the flow or circulation of the insulating medium past the points of discharge, and I take advantage of the presence of such mechanism to accomplish a further and beneficial result which is the maintenance of a flow or circulation of the insulating liquid in which I immerse the converter coils used for raising the potential of the current, and also the condenser plates when such are required and used. By this means the insulating liquid surrounding the said coils and plates may be prevented from heating, either by its circulation alone or by the application to it while in motion of a cooling medium, and its requisite qualities preserved for an in definite time.

+


Tesla Patent 685,012 - Means for Increasing the Intensity of Electrical Oscillations

The best and most convenient manner of carrying out the invention of which I am now aware is to surround the freely-vibrating circuit or conductor, which is to be maintained at a low temperature, with a suitable cooling medium, which may be any kind of freezing mixture or agent, such as liquid air, and in order to derive the fullest benefit from the improvement the circuit should be primarily constructed so as to have the greatest possible self-induction and the smallest practicable resistance, and other rules of construction which are now recognized should be observed. For example, when in a system of transmission of energy for any purpose through the natural media the transmitting and receiving conductors are connected to earth and to an insulated terminal, respectively, the lengths of these conductors should be one-quarter of the wave length of the disturbance propagated through them.

The drawing illustrates in perspective two devices, either of which may be the transmitter, while the other is the receiver. In each there is a coil of few turns and low resistance, (designated in one by A and in the other by A'.) The former coil, supposed to be forming part of the transmitter, is to be connected with a suitable source of current, while the latter is to be included in circuit with a receiving device. In inductive relation to said coils in each instrument is a flat spirally-wound coil B or B', one terminal of which is shown as connected to a ground-plate C, while the other, leading from the center, is adapted to be connected to an insulated terminal, which is generally maintained at an elevation in the air. The coils B B' are placed in insulating-receptacles D, which contain the freezing agent and around which the coils A and A' are wound.

[MonsieurM]

To carry out this invention I employ a motor embodying the principle of construction of a motor described and claimed in an application filed by me January 8, 1889, No. 295,745, to the extent that both the armature and field receive their magnetism from a single energizing-coil or a plurality of coils acting as one.

Tesla Patent 424,036 - Electro-Magnetic Motor

+

In accordance with the invention, provision is made for enveloping the patient in a high potential and, in certain instances, a high frequency electric field, and for applying to the patient, while so enveloped in the electric field, radiations and emanations having therapeutic value.

Thomas H. Moray: Transmutation of Low Grade Ores by High Energy Bombardment

+


Wesley Gary's Magnetic Motor

In order to secure this reversal or loss of polarity in the armature without having it actually touch the magnet it has been hitherto considered necessary that the armature should be carried into and out of the magnetic field or field of attraction of the magnet; or else from the field of one pole into that of the other. This operation required the movement of the armature a long distance, necessitating the expenditure of a large amount of power, limited the frequency of the polar changes, and precluded the full utilization of the magnetic influence.

My invention derives its value mainly from the fact that I do not carry the armature out of the magnetic field, but operate it wholly therein, and secure by a very slight movement the same or better results than those secured in existing machines.

continuing :

Magnetism - Howard Johnson - Roy Davis and Rawls - Bloch Wall - Magnetic Vortex - YouTube

http://en.wikipedia.org/wiki/Domain_wall_(magnetism)

Magnetism[edit]



In magnetism, a domain wall is an interface separating magnetic domainsdepends on the anisotropy of the materialmagnetocrystalline anisotropy energy and the exchange energy (), both of which tend to be as low as possible so as to be in a more favorable energetic state. The anisotropy energy is lowest when the individual magnetic moments are aligned with the crystal lattice axes thus reducing the width of the domain wall. Conversely, the exchange energy is reduced when the magnetic moments are aligned parallel to each other and thus makes the wall thicker, due to the repulsion between them (where anti-parallel alignment would bring them closer, working to reduce the wall thickness). In the end an equilibrium is reached between the two and the domain wall's width is set as such.

from : http://www.energeticforum.com/renewa...iguera-22.html

The gap between the coils.

As an example, my partner in our common research did buy a somewhat expensive Gaussmeter, and as a proud new owner of one, started to play around with magnets and coils. Taking measures left and right, up and down, in and out, noting the results he was seing in his little black book. One of his experiment was with air gap in opposing magnetic fields. With a specific air gap he saw, noted and replicated many times the same experiment and showing for an opposing magnetic field of 200 Gauss to another magnetic field of the same strenght (200 Gauss) not 400 Gauss but 800 Gauss resulted. I tend to believe what he says because of his rigourous application of the scientific protocol. One thing is that I am sure it is wider than his probe thickness(~1mm). Hope this may help.


Michel

... Anisotropy .... here is a word quite fond of

Magnetocrystalline anisotropy - Wikipedia, the free encyclopedia

Practical relevance[edit]

Magnetocrystalline anisotropy has a great influence on industrial uses of ferromagnetic materials. Materials with high magnetic anisotropy usually have high coercivity; that is they are hard to demagnetize. These are called "hard" ferromagnetic materials, and are used to make permanent magnets. For example, the high anisotropy of rare earth metals is mainly responsible for the strength of rare earth magnets. During manufacture of magnets, a powerful magnetic field aligns the microcrystalline grains of the metal so their "easy" axes of magnetization all point in the same direction, freezing a strong magnetic field into the material.

On the other hand, materials with low magnetic anisotropy usually have low coercivity, their magnetization is easy to change. These are called "soft" ferromagnets, and are used to make magnetic cores for transformers and inductors. The small energy required to turn the direction of magnetization minimizes core losses, energy dissipated in the transformer core when the alternating current changes direction.

Soft iron[edit]




"Soft" (annealed) iron is used in magnetic assemblies, electromagnets and in some electric motors; and it can create a concentrated field that is as much as 50,000 times more intense than an air core.[2]

Iron is desirable to make magnetic cores, as it can withstand high levels of magnetic field without saturating (up to 2.16 teslas at ambient temperature.[3])

It is also used because, unlike "hard" iron, it does not remain magnetised when the field is removed, which is often important in applications where the magnetic field is required to be repeatedly switched.

Unfortunately, due to the electrical conductivity of the metal, at AC frequencies a bulk block or rod of soft iron can often suffer from large eddy currents circulating within it that waste energy and cause undesirable heating of the iron.

Magnetic core - Wikipedia, the free encyclopedia

[MonsieurM]

Fela Kuti - Beasts of No Nation - YouTube

Mysterious cosmic rays constantly bombard Earth from outer space. Now scientists find these energetic particles could limit where life as we know it might exist on alien planets

Cosmic rays continue to baffle scientists more than a century after they were first discovered . These charged subatomic particles zip through space at nearly the speed of light, a few strangely with energies up to 100 million times beyond what is possible from the most powerful particle accelerator on Earth. Cosmic rays are believed to be atomic nuclei, with the vast majority being protons, or hydrogen nuclei.

When cosmic rays hit Earth's atmosphere, they generate a shower of other particles, including muons, which are essentially much heavier versions of their cousin the electron. Some of these particles reach Earth's surface, potentially damaging life on land and in the


Read more at:

Cosmic rays zap a planet's chances for life

the strength of its magnetic field, and the depth of its atmosphere.

Read more at:

I have harnessed the cosmic rays and caused them to operate a motive device.

N. Tesla

+

Electrical and Magnetic Properties of Sulfides


Carolyn I. Pearce, Richard A.D. Pattrick, David J. Vaughan
School of Earth, Atmospheric and Environmental Sciences, and Williamson Research
Centre for Molecular Environmental Science
University of Manchester
Manchester, United Kingdom
e-mail: [email protected]

INTRODUCTION
The metal sulfides exhibit a great diversity of electrical and magnetic properties with both
scientific interest and practical applications. These properties apply major constraints on mod-
els of the electronic structure (or chemical bonding) in sulfides (Vaughan and Rosso 2006, this
volume). The pure and doped synthetic equivalents of certain sulfide minerals have actual or
potential applications in the electronics industries (optical devices, photovoltaics, photodiodes
and magnetic recording devices). Sulfides are also components of many thin film devices and
have been extensively investigated as part of the nanotechnology revolution. Certain electrical
and magnetic properties of sulfide minerals mean they contribute to geomagnetism and paleo-
magnetism, and provide the geophysical prospector with exploration tools for metalliferous
ore deposits.

...

In accordance with the invention, provision is made for enveloping the patient in a high potential and, in certain instances, a high frequency electric field, and for applying to the patient, while so enveloped in the electric field, radiations and emanations having therapeutic value.

Thomas H. Moray: Transmutation of Low Grade Ores by High Energy Bombardment

I have found that, be enveloping a patient in a high potential, high frequency field in such a manner that no closed circuit is completed through his body, radioactive and other electronic and radiation phenomena can be used therapeutically with considerably greater effectiveness than if used alone. The exact reason for this is not known, nor is it known definitely which, the electric field or the radioactive phenomena, acts upon the other to produce the advantageous results. It is thought, however, that the electric field permeating the body of the patient as it does attracts the radioactive emanations or radiations and enables them to penetrate considerably deeper into the tissues and vital organs of the patient than would otherwise be the case. In any event, remarkable therapeutic results have been achieved by use of the invention in the treatment of malignant tumors. Arthritis, sinus infections, and various other diseased conditions.

... Mu ON

Because muons have a very large mass and energy compared with the decay energy of radioactivity, they are never produced by radioactive decay. They are, however, produced in copious amounts in high-energy interactions in normal matter, during certain particle accelerator experiments with hadrons, or naturally in cosmic ray interactions with matter. These interactions usually produce pi mesons initially, which most often decay to muons.

Muon - Wikipedia, the free encyclopedia

[MonsieurM]

talking about HHO :

Playing loud pop music boosts output of solar panels by 40% > National News > News | Click Green

The high frequencies and pitch found in pop and rock music cause vibrations that enhanced energy generation in solar cells containing a cluster of 'nanorods', leading to a 40 per cent increase in efficiency of the solar cells.

it reminded me of an old post http://www.energeticforum.com/renewa...arvesting.html

Crystals is the Key to Harvesting energy from the enviroment.

All semiconducter electronics components are based on different types of crystals, different sizes, different geometries, each quality can be optimized to tune into different frequency.

With the new development in nano crystals, there's a handful of people conducting nano piezoelectric research at home, I hope that We can also take advantage of this development and use this new technology as a way of obtaining Energy Freedom.

There are many applications for these piezoelectric crystals, the technology is over 100 years old but not much was done until recently.

I hope that we some of you will come together and start developing devices such as Nokia Self Charging Phone Battery, Piezo Cells for Self Charging small batteries AAA-C size etc.

Current Project.Piezoelectric production of Atomize water with HHO for ICE water fuel.

I have been trying to come up with a simple low temperature method to growing micro size single crystals at low temperature that is simple enough for anyone to perform. the mainstream ZnO single cystals are fused at high temperature and vapor deposited requiring complicated setup and technical expertise.

This is a simplified version for home use.
Please use all precaution, I am not responsible for anything that may occur.

Materials:
1lb. Zinc powder nano.
1 gallon ammonia cleaning (ammonium hydroxide)

Hot plate with Magnetic Stirrer
teflon coated stir bar.
1 liter boiling flask with rubber stopper.
reflux condenser if available.
water bath.
thermometer


Dissolve 30 grams of ZnO in each 300 ml of 30% ammonium chloride/ hydroxide. This is best done by filling 300 ml of 30% amonnium hydroxide into the flask and place on stirrer with teflon bar. Turn on the heat to medium, Turn on Stirrer to low speed, #3. Slowly add zinc oxide to solution. When all ZnO is dispensed, cap flask and turn up stirrer to maximum, bring the heat up to 60 deg C and let it mix for 30 minutes.



Place flask in the Freezer and freeze solution to -0 degrees C.
When you reach this temperature, allow an additional 1 hr.

Before reflux, bath flask in a bowl of room temperature water for 5 minutes to avoid thermal shock and breakage of flask.

Set up water bath, large boiling glass bowl with water. Put your flask of cold solution in the water bath and set up reflux condenser with water tube, if you don't have one then just cap your flask tightly and turn on heat. Allow solution to heat up to 60 degrees C, maintain 60 deg C temperature for 2 hours, crystals will grow during this time.

Let solution cool to room temperature, Filter solution and recover crystals.

the crystals are self seeding. these crystals are not the typical large crystals that most people grow at home. the single crystals are very small, nano size, at this size, they are able to pick up all induced waves and convert waves into electrolysis of water.

There is already a thread on HHO, we can discuss HHO piezoelectric application there,

and discuss Growing of Crystals here, there are many different types of crystals, and many different method of utilizing them.

i wonder if you can make An Ice Capacitor with:

treated water ( or not )

+

Embedded Coil ( see Tesla Electrolytic Clock aka Tesla Patent 567,818 - Electrical Condenser )

+

ZnO Nanorods ( mixed in water ) or Copper oxide nanorods ( maybe ) .... Epsom Salt Like Battery







ps: Chapter 3: Electrochemistry

Our solar cell is made from cuprous oxide instead of silicon. Cuprous oxide is one of the first materials known to display the photoelectric effect, in which light causes electricity to flow in a material.

[MonsieurM]

shall we continue

An Electrolytic Clock from The Electrical Engineer, May 6th, 1891

If a delicately and pivoted and well-balanced metal disc or cylinder be placed in a proper plating solution ( electrolyte ) midway between the anode and cathode, one half of the disc becomes electro positive and the other half electro negative. Owing to this fact metal is deposited on one, and taken off from the other half, and the disc is caused to rotate under the action of gravity. As the amount of metal deposited and taken off is proportionate to the current strength, the speed of rotation, if it be small, is proportionate to the current.

+


Tesla Patent 567,818 - Electrical Condenser

It has heretofore been announced and demonstrated by me that, under ordinary conditions, the efficiency of an electrical condenser is greatly increased by the exclusion of air or gaseous matter in general from the dielectric. In a patent granted to me December 8, 1891, No. 464,667, I have shown and described a convenient and practicable means of accomplishing this result by immersing the conducting-plates or armatures of the condenser in an insulating fluid, such as oil.

My present invention, while based upon this important feature of the practically complete exclusion of air or gas from the dielectric, is an improvement on the forms of condenser heretofore described and used by me.

According to my present invention I employ an electrolyte, or, in general, a conducting liquid in lieu of a solid, as the material for the armatures of the condenser, under conditions more fully hereinafter described, whereby air or gas will be practically prevented from exercising upon the condenser or the more active portions of the same the detrimental effects present in such devices as heretofore made. Such condensers are especially advantageous when used with circuits of great rates of electrical vibration because of the high conducting capacity of such fluids for currents of this character. There is, however, a general advantage derived from the fact that the conducting fluids have a high specific heat, so that the temperature remains constant, a condition in many cases highly advantageous and not met with in condensers of ordinary construction.

To carry out this invention I employ a motor embodying the principle of construction of a motor described and claimed in an application filed by me January 8, 1889, No. 295,745, to the extent that both the armature and field receive their magnetism from a single energizing-coil or a plurality of coils acting as one.

Tesla Patent 424,036 - Electro-Magnetic Motor

replace oil with water for the armature :



you need the following valve for the hho gaz

3D Printed Tesla Valve - YouTube

[MonsieurM]

just realized something .... in our current discussion .... we are Enveloping Tesla's Patents Together with other Patents

see also : List of multiple discoveries - Wikipedia, the free encyclopedia




sometimes you use the defects to your advantage ... others ...

Tesla Patent 464,667 - Electrical Condenser

The subject of my present application is a new and improved electrical condenser constructed with a view of obviating certain defects which I have observed to exist in the ordinary forms of such apparatus when employed in the system devised by me of producing light and other effects by means of currents of high frequency and high potential.

I have found that insulating material such as glass, mica, and, in general, those bodies which possess the highest specific inductive capacity are inferior as insulators in such devices when currents of the kind described are employed to those possessing high insulating power, together with a smaller specific inductive capacity, and I have also found that it is very desirable to exclude all gaseous matter from the apparatus, or any access to the same to the electrified surfaces, in order to prevent heating by molecular bombardment and the loss or injury consequent thereon. I have found that I may accomplish these results and produce highly efficient and reliable condensers by using oil as the dielectric, and in this my invention resides.

electric condenser composed of plates or armatures immersed in oil.
2. An electrical condenser composed of plates or armatures adjustable with respect to one another and immersed in oil.

-------------

esmotech

EVERY day, tonnes of uncooked meat in our supermarkets, restaurants and hotels are destroyed before reaching their recommended shelf life.

Mr Sebestian Chua (left) and his brother, DrRichard Chua, hope the EsmoSphere will add another level of protection over food storage. -- Picture: KELVIN CHNG

Even with refrigeration, meat still spoils easily because the temperature is not always consistent and has to be thrown away.

Last year alone, almost half-a-million tonnes of food waste were incinerated.

Now, thanks to a local company, Esmo Technologies, the amount of spoiled raw meat can be cut by about a third, simply by placing a specially modified magnet next to it in the refrigerator.

In accordance with the invention, provision is made for enveloping the patient in a high potential and, in certain instances, a high frequency electric field, and for applying to the patient, while so enveloped in the electric field, radiations and emanations having therapeutic value

Magnetic Interference CloudTM technology was developed by its chief founder and inventor, Dr. Richard Chua, who created a unique method of causing magnetic interfered fields to swirl around perishable or liquid objects in a manner that changes the binding force that hold them together, thereby improving cell rigidity, hydration and structure.

... While Freezing inside a Capacitor / oscillator ( ie Fridge )

To carry out this invention I employ a motor embodying the principle of construction of a motor described and claimed in an application filed by me January 8, 1889, No. 295,745, to the extent that both the armature and field receive their magnetism from a single energizing-coil or a plurality of coils acting as one.

Tesla Patent 424,036 - Electro-Magnetic Motor