The Golden Tractate of Hermes Trismegistus applied to electromagnetism

[MonsieurM]

a quick Tesla Patent Search with the word : enveloping .... in it



Tesla Patent Search Results

Tesla Patent 1,266,175 - Lightning-Protector

My protector, by contrast, is founded on principles diametrically opposite. Its terminal has a large surface. It secures a very low density and preserves the insulating qualities of the ambient medium, thereby minimizing leakage, and in thus acting as a quasi-repellent to increase enormously the safety factor.

+

A New System of Alternate Current Motors and Transformers from The Electrical Engineer, June 15th, 1888

In the first experiment a drum-armature was provided with two coils at right angles to each other, and the ends of these coils were connected to two pairs of insulated contact rings as usual. A ring was then made of thin insulated plates of sheet iron, and wound with four coils, each two opposite coils being connected together so as to produce free poles on diametrically opposite sides of the ring. The remaining free ends of the coils were then connected to the contact rings of the generator armature so as to form two independent circuits, as indicated in Fig. 9

see also another "Protector" : http://www.energeticforum.com/242129-post622.html

[MonsieurM]

Matching a Pattern

from : http://www.energeticforum.com/242556-post5774.html



more on this here : U.S. Patent Images

enveloping the said cores and adapted to produce polarities or poles in both, the field-cores extending out from the coils and constructed so as to exhibit the magnetic effect imparted to them after the fall or cessation of current impulse producing such effect, as set forth.

Tesla Patent 424,036 - Electro-Magnetic Motor

when you look at the Turbine , the Electrolytic Clock , and the Rotating Machine ( see Asymmetric Machine thread ) / Resonant Coil ... you realize that the shapes are one and the same .... Armature / Rotation / Fluid

[MonsieurM]

Strange Electrostatic Experiment---- better setup - YouTube




-------------------

http://en.wikipedia.org/wiki/Stanley_Meyer's_water_fuel_cell .... "fuel cell water capacitor"

Abstract

An injector system comprising an improved method and apparatus useful in the production of a hydrogen-containing fuel gas from water in a process in which the dielectric property of water and/or a mixture of water and other components determines a resonant condition

In accordance with the invention, provision is made for enveloping the patient in a high potential and, in certain instances, a high frequency electric field, and for applying to the patient, while so enveloped in the electric field, radiations and emanations having therapeutic value.

Thomas H. Moray: Transmutation of Low Grade Ores by High Energy Bombardment

+


Leon Sprink - Antigravity - patents


same set up : A Capacitor / Oscillator within A Capacitor / Oscillator




from : http://www.energeticforum.com/renewa...ystem-104.html

My coil is about 9in so it fits under both transducers. I have tried various positions and that is the most beneficial.
Good Luck,

Randy

--------

How to make a bifilar pancake coil - YouTube .... Bifilar Pancakes Inductive Coupling - YouTube ... Resonance Effects: Tesla Bifilar Coil Alternating Field Rotating a Magnetic Compass - YouTube ( note that Square Wave is Mentioned )


on a side note


how to make a flat panel speaker from a pencil and crisp packet - YouTube

[MonsieurM]

"Tesla's New Monarch of Machines"

the limitless possibilities of such an engine.

+

Leon Sprink - Antigravity - patents

In the simplest form of the invention, Sprink used a grounded container placed in an electrostatic field. More control and power was obtained with geometric arrays of positive electrodes mounted diagonally from grounded electrodes.

Excerpt: Preface (by Raymond Abellio ) in Armand Babault: Gold of a Thousand Mornings

...To speak of activation of space gets one decidedly nowhere. It is simply a picturesque and handy term, yet one which is heard more and more often. I first encountered it in the description of the patent taken out in 1950 by the Russian engineer Sprink, who runs a cement-manufacturing company in France. In it, he states that the creation of an electric field nearby greatly speeds up reactions inside his ovens. He is unable to explain why...

In accordance with the invention, provision is made for enveloping the patient in a high potential and, in certain instances, a high frequency electric field, and for applying to the patient, while so enveloped in the electric field, radiations and emanations having therapeutic value.

Thomas H. Moray: Transmutation of Low Grade Ores by High Energy Bombardment

[MonsieurM]

The Tesla High Frequency Oscillator from The Electrical Experimenter, March, 1916

Briefly explained, the Tesla theory is that a wireless tower, such as that here illustrated and specially constructed to have a high capacity, acts as a huge electric condenser

+

Cloudborn Electric Wavelets To Encircle The Globe from New York Times, March 27th, 1904

The transmitting station is an octagonal tower, pyramidal in shape, and some 180 feet in height. It consists of huge wooden stilts, heavily braced, and reinforced, and surmounted by a cupola of interlaced steel wires, bent so as to form an arc. In the cupola there is a wooden platform occupying its entire width.

+

ole dug in the ground. This is 150 feet deep and is used in these experiments.

+

The coil resting on three legs and observed in the immediate foreground is the primary of a Resonant Tesla transformer which collected energy from an oscillatory circuit encircling the laboratory, no matter in what position the transformer was placed

what do you see :

It is preferable that the dielectric 16 be in the form of a closed tube or envelope, as shown, and be exhausted to vacuum condition. The multitude of sparking prongs 17a produce a brush discharge.

Where the dielectric 16 is not a closed tube or envelope, it is preferred that it be of quartz.

image from : Thomas H. Moray: Transmutation of Low Grade Ores by High Energy Bombardment

In accordance with the invention, provision is made for enveloping the patient in a high potential and, in certain instances, a high frequency electric field, and for applying to the patient, while so enveloped in the electric field, radiations and emanations having therapeutic value.

Alternative Energy eMagazine - Fused Quartz, a Critical Component of the Solar Power Industry | AltEnergyMag

solar panel are made of " plates stacked in a pile" of particular Material

[MonsieurM]

other example : ..... Form Voltron - YouTube







+


Playing loud pop music boosts output of solar panels by 40% > National News > News | Click Green

[MonsieurM]

Gustave LeBon: The Evolution of Forces ~ Part II

We have here a very general fact which is in no way limited to the case of metal filings. This is that fragments of metal in contact with one another and presenting considerable resistance -- 30,00 ohms, for example -- to the passage of electricity, become conductors under the influence of very weak electric waves, and lose this conductivity by a simple shock. These variations indicate a great variability in the aggregation of atoms under the influence of infinitely weak but appropriate forces.

rota / introduction to the work of Louis Rota

The energy flowing within the earth generates a field in the atmosphere. It was tapped by large buried laminated metallic structures which Rota called blocks. The energy could light lamps, power machines, inhibit electromagnetic propagation such as radio waves and stop or control electromagnetic induction

Gustave LeBon: The Evolution of Forces ~ Part II

It is easy to illustrate what has just been said by a curious experiment due to M. Branly. A column of metal of 30 or 40 cm in height is formed by placing one upon the other a series of polished discs of bismuth, aluminum, etc., of the dimensions of a 5-franc piece. The column may even be made merely of polished steel balls placed in a test tube. The resistance of this column to the passage of an electric current is still considerable. If we make a small electric spark near it, the resistance becomes almost nil. To cause it to reappear, it suffices to give a tap to the upper part of the column.

see also :

a similar design / idea can be found here : Palmer Craig: Hall Effect Device (Battery, rectifier, amplifier)

The bismuth-based ceramic dielectrics have excellent electrical resistivity greater than 1014 ohm-cm

Most discontinuous conductors can exhibit these variations. Now we hardly handle any other than discontinuous conductors. A continuous conductor, such as a metal wire, becomes discontinuous immediately we connect it to the terminals of a battery

Gustave LeBon: The Evolution of Forces ~ Part II.

The device is called an "electromagnetic detector and amplifier" and consists of a series of bismuth plates stacked in a pile and interlaced with copper wires. The bismuth plates are protected by a coating of sulfur because bismuth, a very brittle substance, is likely to crumble

( picture above is of a Normal Car Battery )

[MonsieurM]

The beauty of Tesla's writings .... the simplicity by which you can envision his Discoveries

He does not go into technical Wordings .... it is not the purpose ... Truth is to be found in simplicity

Many "Free Energy" Researchers tend to forget that ... the reason is simple ... formated by an industrial Education System ... and the need for recognition by "scientific peers" .... Ego


As a Famous Dowser once said : ( paraphrasing )

It works and i don't care about the Math

The trouble with Nikola Tesla is that he lives a century ahead of his time. He has often been denounced as a dreamer even by well informed men. He has been called crazy by others who ought to know better. For Tesla talks in a language that most of us do not as yet understand. But as the years roll on Science more and more appreciates his greatness, and begins to pay him tribute more and more

Nikola Tesla and His Inventions — An Announcement from Electrical Experimenter, January, 1919.

the Language of Intuition and Imagination ... Tesla-Turbine-Technology-Sevier-Bonnie - YouTube

a word Tesla uses often : ( in the presentation also )

viscosity, as it is termed. The first is proportionate to the density; the second to this peculiar property of the fluid.

Nikola Tesla Tells How We May Fly Eight Miles High at 1,000 Miles an Hour from Reconstruction, July, 1919

This will be understood if we compare, for instance, water and oil. The latter is lighter, but much more sticky, so that it is a greater obstacle to propulsion than water. Air is a very viscous substance and that part of resistance which is due to this quality is considerable ( see dielectric ) . We must take this latter resistance into account in calculating how fast an aeroplane could fly in the upper reaches of the air.

[MonsieurM]

History of the Wire Recorder - Inventing the Telegraphone wire recorder

The Telegraphone (pronounced with the emphasis on the second syllable) was the first device capable of recording sound magnetically, and it did so on a thin steel wire; Poulsen and others called it piano wire, and it was apparently a single strand of commercially available wire made of ordinary steel. His very first machine, intended only to demonstrate the concept, employed a relatively short length of wire, wrapped around a metal cylinder, which was hand-cranked. This avoided the need to design a functional wire-transport system. Within a short time, Poulsen also demonstrated a steel "ribbon" or tape recorder and then a machine to record magnetically on a steel disk. All three types were promoted as alternatives to phonograph-type dictating machines, such as the recently introduced phonograph and graphophone (in the 1880s these were still sold mainly for dictation). Poulsen saw as the chief advantage of the Telegraphone its ability to record directly from the telephone lines, which the phonograph could not do. Such a machine might, for example, provide a sort of remote dictation capability. It was a humble beginning for a technology that would eventually replace its rival, the phonograph, and become amazingly common today.


The Telegraphone generated a lot of excitement and was hailed as a scientific breakthrough (the recording process seemed to contradict contemporary theories of magnets). As a commercial product, the history of the Telegraphone was less than successful. It was manufactured in at least two versions, one by Poulsen's workers in Denmark, and another by the American Telegraphone Company of Wheeling, West Virginia and later Springfield, Massachusetts.

+

My Apparatus, Says Tesla from New York Times, December 20th, 1907

I note other improvements of mine, but those mentioned will be sufficient to show that Denmark is a land of easy invention.

The claim that transatlantic wireless telephone service will soon be established by these means is a modest one. To my system distance has absolutely no significance. My own wireless plant will transmit speech across the Pacific with the same precision and accuracy as across the table.

Nikola Tesla
New York, Dec. 19, 1907

--------------

The Tesla High Frequency Oscillator from The Electrical Experimenter, March, 1916

Briefly explained, the Tesla theory is that a wireless tower, such as that here illustrated and specially constructed to have a high capacity, acts as a huge electric condenser

+

Cloudborn Electric Wavelets To Encircle The Globe from New York Times, March 27th, 1904

The transmitting station is an octagonal tower, pyramidal in shape, and some 180 feet in height. It consists of huge wooden stilts, heavily braced, and reinforced, and surmounted by a cupola of interlaced steel wires, bent so as to form an arc. In the cupola there is a wooden platform occupying its entire width.

+

ole dug in the ground. This is 150 feet deep and is used in these experiments.

+

Capacity of Electrical Conductors is Variable.Capacity Varies With Absolute Height Above Sea Level, Relative Height From Earth and Distance From the Sun.

+

Nikola Tesla on Electric Transmission from New York Evening Post, September 26th, 1921

Sir: Your issue of the 14th inst. contains a report relative to an experimental demonstration at the Pittsfield plant of the General Electric Company in which a pressure of one million volts was used for transmission of power by alternating currentsthe production of pressures amounting to many millions of volts. It may not be amiss to state furthermore that a license was offered to the General Electric Company under my basic patent which bears the No. 1,119,732 and was granted December 1, 1914, the original application having been filed January 16, 1902.

.... An idea of the underlying principle of the invention and its practical significance may be conveyed by an analogue. Alternating currents transmitted through a wire can be likened to pulses of some liquid, as water, forced through a woven hose So long as the pressure is moderate the fluid entering one end will be integrally discharged at the other, but if the pressure is increased beyond a certain critical value the hose will leak and a large portion of the fluid may thus be wasted. Similarly in electric transmission, when the voltage becomes excessive the prison walls of the dielectric yield and the charge escapes ( see also : http://www.energeticforum.com/renewa...ystem-106.html )

[MonsieurM]

MonseirM great job.....

Thank you Ruphus and thank you for reading the posts

Tesla's magazine Articles are a mine of info , it should be noted that in some cases where the articles are not to Tesla's liking , he does not hesitate to write letters to correct it ex : Correction By Mr. Tesla from New York Times, October 4th, 1915

so in other words he read the articles written about him ( not all ... certainly those published in New York )

---------

when you look at the Turbine , the Electrolytic Clock , and the Rotating Machine ( see Asymmetric Machine thread ) / Resonant Coil ... you realize that the shapes are one and the same .... Armature / Rotation / Fluid

The coil resting on three legs and observed in the immediate foreground is the primary of a Resonant Tesla transformer which collected energy from an oscillatory circuit encircling the laboratory, no matter in what position the transformer was placed

an oscillator / Capacitor within an Oscillator / Capacitor

Most generally I employed receiving circuits
in the form of loops, including condensers, because the discharges of my high-tension transmitter
ionized the air in the hall ( which is encircled by an oscillatory circuit ... most probably ) so that even a very small aerial would draw electricity from the
surrounding atmosphere for hours


My Inventions by Nikola Tesla Autobiography YouTube - YouTube

The loop form of receiver was not sensitive to such a disturbance
and it is curious to note that it is becoming popular at this late date. In reality it collects much less
energy than the aerials or a long grounded wire,

you can even interchange the parts ( think going Voltron on these Three Inventions : "combining-robot" cartoon )

[Ruphus]

Brilliant find!

MonseirM great job.....

[MonsieurM]

Tesla .... you sly dog

An Electrolytic Clock from The Electrical Engineer, May 6th, 1891

If a delicately and pivoted and well-balanced metal disc or cylinder be placed in a proper plating solution midway between the anode and cathode, one half of the disc becomes electro positive and the other half electro negative. Owing to this fact metal is deposited on one, and taken off from the other half, and the disc is caused to rotate under the action of gravity. As the amount of metal deposited and taken off is proportionate to the current strength, the speed of rotation, if it be small, is proportionate to the current.

+



Tesla Patent 1,061,206 - Turbine

5. A machine adapted to be propelled by a fluid comprising in combination a plurality of spaced disks rotatably mounted and having plane surfaces, an enclosing casing and ports or passages of inlet and outlet adjacent to the periphery and center of the disks, respectively, as set forth.

[MonsieurM]

flow up


Company using electric field to shape flame to make power plants cleaner


----------------

My Inventions by Nikola Tesla Autobiography YouTube - YouTube ..... Audio Book

[MonsieurM]

Old thread but thought this would fit in nicely with this topic.

PAPILLON: Designing Curved Display Surfaces with Printed Optics - YouTube

good reading you occy30

for the occasion : key idea .... Tesla ThermoMagnetic Machine

Using heat to make magnets

EPFL scientists have provided the first evidence ever that it is possible to generate a magnetic field by using heat instead of electricity. The phenomenon is referred to as the Magnetic Seebeck effect or 'thermomagnetism'.

1821

---------------


update to a previous post : http://www.energeticforum.com/231310-post3182.html


+

Jules Guillot -- Atmospheric Electric Generator -- Article & 2 French Patents

Jules GUILLOT

Atmospheric Electric Generator

[QUOTE]from : http://www.energeticforum.com/renewa...onization.html

A little additional information here (seems like I can not update 1st post).

The technology described in the patent involves, far as I have understood, electrostatics, asymmetric Leyden jars & ionization via needles



.

+

Electroflame contactless technology extinguishing

http://www.energeticforum.com/145947-post7.html

[Raphael37]

Old thread but thought this would fit in nicely with this topic.

PAPILLON: Designing Curved Display Surfaces with Printed Optics - YouTube

yes I agree it does

I enjoyed it so much I added it a blog of mine to help illustrate a simpleton IDEA that helps to build a bridge to help reconcile science and ALL religions, not just the one religion that King Dave-id spews called X-tianity that which has identified him as 'chosen'.

the IDEA is called pi





selah V