Stingo Solid State Battery Charger

[cikljamas]

[/QUOTE][/QUOTE]

It is hard to precise measure ohms, but it is 7 m (23 feets) ...I disassembled
my 20 awg toroid yesterday, and reassembled with 23 awg...

What is that every day application if we are allowed to know ?
I use my as cell phone battery charger ( 300 mA input- 200 mA output )
But for much bigger batterys i use Bedini multicoils ssgs, higher efficency...

[cikljamas]

It seems i just dont know how to quote that i get before quotations :
ORIGINALLY POSTED BY XY...Sorry, i have to ask somebody to explain
me that procedure...

[Godfrey]

It is hard to precise measure ohms, but it is 7 m (23 feets) ...I disassembled my 20 awg toroid yesterday, and reassembled with 23 awg...

Thanks for the measurements! Now, how to keep all that flippin' wire straight?!...

What is that every day application if we are allowed to know ?

Electronic sleeping aid, radiant style

It seems i just dont know how to quote that i get before quotations :
ORIGINALLY POSTED BY XY...Sorry, i have to ask somebody to explain
me that procedure...

[sucahyo]

What is that every day application if we are allowed to know ?

Just like Godfrey mention, sleeping aid, though I believe it can reduce "electro smog" problem too. I now consider it a must if you do experiment with radiant and get problem. Scary that there are people consider keeping a device that can make them experience headache running inside their house. Can't stand to be in the same room of the running circuit some say, but they still let it run....

If anyone have one of those circuit with ill effect, please consider the health of everyone else living under the same roof as you. Free energy device can be a health device too, just like what Tesla and Schauberger trying to do.

Thanks for the measurements! Now, how to keep all that flippin' wire straight?!...

we need room to let wire straight. My wire kept rolling when I guide it from right to left thogh ....

[cikljamas]

Thanks for the measurements! Now, how to keep all that flippin' wire straight?!...

Welcome, but better result you are going to have with transformer from
cell phone charger, i got with it cop > 1 when i charge cell phone battery...
200 mA on the input, and 220 mA on the output...

Just like Godfrey mention, sleeping aid, though I believe it can reduce "electro smog" problem too. I now consider it a must if you do experiment with radiant and get problem. Scary that there are people consider keeping a device that can make them experience headache running inside their house. Can't stand to be in the same room of the running circuit some say, but they still let it run....

If anyone have one of those circuit with ill effect, please consider the health of everyone else living under the same roof as you. Free energy device can be a health device too, just like what Tesla and Schauberger trying to do.

It is interesting purpose, i will certainly try stingo in that way too...
I heard about Teslas claims that radiant energy can be used for that
purposes but i didnt know how...

[Jiffycoil]

Playing catch up

Hi all,
Please excuse my ignorance but I'm reading everything you all have posted, watching everything you have filmed and reviewing what you have built. I have only built the basic setup and run it with a car ignition coil. Tonight I tried to power a pancake coil I had wound for the Slayer Exciter. The results were very interesting. I could not get the coil into "resonance" over 1.5 volts but the results below that were impressive.

YouTube - Stingo powering Pancake coil

Thanks to Sucahyo and all here.

[cikljamas]

Hi all,
Please excuse my ignorance but I'm reading everything you all have posted, watching everything you have filmed and reviewing what you have built. I have only built the basic setup and run it with a car ignition coil. Tonight I tried to power a pancake coil I had wound for the Slayer Exciter. The results were very interesting. I could not get the coil into "resonance" over 1.5 volts but the results below that were impressive.

YouTube - Stingo powering Pancake coil

Thanks to Sucahyo and all here.

Hi Jiffycoil !
Thanks for sharing your stingo experience with as !
Well, it is getting even more interesting, this stingo story...
Could you add one more meter, beside those three on the bench and see mAoutput ?
I hardly can wait what Sucahyo is going to say about this...

[Jiffycoil]

It was a pleasure to share . If I may ask how to attach the mA out to the Stingo? I've tried and get inaccurate readings.

[Godfrey]

Welcome, but better result you are going to have with transformer from cell phone charger, i got with it cop > 1 when i charge cell phone battery...200 mA on the input, and 220 mA on the output...

Nice results and good suggestion!

I've got at least a half dozen old DC power supplies from various portable devices no longer in use. The majority are 110V A/C to 5V DC power converters. I should start cracking them open and see what transformers they contain.

It is interesting purpose, i will certainly try stingo in that way too...

I heard about Teslas claims that radiant energy can be used for that
purposes but i didnt know how...

[sucahyo]

Welcome, but better result you are going to have with transformer from cell phone charger, i got with it cop > 1 when i charge cell phone battery... 200 mA on the input, and 220 mA on the output...

You use 12V source to charge 4.5V? Do that cellphone charger transformer have secondary?

Hi all,
Please excuse my ignorance but I'm reading everything you all have posted, watching everything you have filmed and reviewing what you have built. I have only built the basic setup and run it with a car ignition coil. Tonight I tried to power a pancake coil I had wound for the Slayer Exciter. The results were very interesting. I could not get the coil into "resonance" over 1.5 volts but the results below that were impressive.

YouTube - Stingo powering Pancake coil

Thanks to Sucahyo and all here.

Wow. Very interesting result .

1. You can make stingo oscillate with pancake coil
2. You can make stingo oscillate under 1.5V
3. You get more output voltage at that voltage
4. And what a weird scope shot . I wonder if we can see it with digital scope too.


Those are impressive result .

Don't worry about pronounciation, my name spelled like spanish .

[sucahyo]

What's particularly interesting to me is Sucahyo's option to wire the Stingo to the metal of the bed frame and to water. It is much more convenient than directly being attached to a wire and transmits radiant energy to the whole bed. It’s also a demonstration of radiant energy’s unique behavior compared to regular electricity.

Yes, we do not need the wire to touch us. Some mention this method similar to Lee Crock healing with wiremesh over body, the difference is I don't switch polarity. Lee Crock use switch polarity in 15 minutes to cure alzeimer, etc. WIth the side effect of need rest for weeks. He use battery though.

Since radiant is more powerfull, if you do experiment with Lee Crock way of healing, use sleeping polarity to neutralize the side effect after that.

I can only suggest ungrounded water to hold the other polarity for now.

[Godfrey]

I have noticed that sometimes it is possible to drive the stingo without oscillation. I have noticed this mostly when trying to drive it with a motor as the coil. I wonder if when the output is proportional to consumption, the stingo is not oscillating? Could you still light the neon in the second activation? If so, it must be oscillating because the inductive spikes light the neon.

I notice the difference using my little oscilloscope. If the circuit is oscillating, we see the spikes. If not, the scope shows only a flat dc output.

Yes, sometimes I have observed the motor running but the stingo is not oscillating, and there is just flat DC (not pulsed) at the radiant output. Yes, I think the NPN just stays on, and gets very hot. I will try to investigate more and report. I think I have seen this the most when trying to run brushed DC motors.

[Godfrey]

Hi all,
Please excuse my ignorance but I'm reading everything you all have posted, watching everything you have filmed and reviewing what you have built. I have only built the basic setup and run it with a car ignition coil. Tonight I tried to power a pancake coil I had wound for the Slayer Exciter. The results were very interesting. I could not get the coil into "resonance" over 1.5 volts but the results below that were impressive.

YouTube - Stingo powering Pancake coil

Wow, Jiffycoil, very interesting setup and results! My compliments on your high quality presentation too!

I'm not going to repeat Sucahyo's underscores, but I'm impressed with the same details too. I haven't been able to get life out of my 3V Stingo for anything under 2.5V That's what my batteries are down to when my Stingo stops running.

Do you get the same results starting at 1.5V, or do you need to kick-start the oscillations at a higher voltage to begin with, before you can turn down the input power that low?

The scope output looked interesting. We'll have to try and duplicate your pancake coil and see what the output looks like on a digital scope. Can you share some details of the specific construction of your coil?

It was a pleasure to share . If I may ask how to attach the mA out to the Stingo? I've tried and get inaccurate readings.

Problem is, you need to have a load hooked up to the output to measure that (with meter leads in series) and the minute you do so, you'll change everything...wave shape...frequency...output characteristics...required power input?...But please do give it a go.

- Godfrey

[Jiffycoil]

@Godfrey
Thanks for the kind words. I'll hook it up again and check and see if it needs a higher voltage to kick start the oscillation. Honestly I didn't check to see. I'll also try the load and amp draw setup you mentioned. I have to tell you that I have learned so much reading yours and the other Stingo experimenters posts. This really is an interesting circuit.

[Godfrey]

Yes, we do not need the wire to touch us.

Take it from me, a long term insomniac, I get real results with the radiant negative connected only to the bed frame...dramatically deeper rest.

Since radiant is more powerfull, if you do experiment with Lee Crock way of healing, use sleeping polarity to neutralize the side effect after that.

I don't know if this is the best place to post this, but since you mention it, me and my wife have been napping with the Stingo sleeper to recover right after sessions with the Hulda Clark zapper.

I can only suggest ungrounded water to hold the other polarity for now.

If I leave the water, that is connected to the radiant positive, too long before emptying it out and replacing it with fresh tap water, the effect is to feel increasingly agitated, rather than restful. So, IMO, the water does act as a DOR trap/sink.

- Godfrey