gravity waves found

[Harvey]

So hands feel increased or reduced weight inide the field, but the scaled can't tell a diffference. Who'd got an idea what "it" is, then?
A local inertia reduction of sorts? Only working on moving objects?

I had a lucit moment earlier tonight, where I figured gravit was made up of various components, previously understood as one, as they'd never been isolated on earth's surface. Something is amiss in out current understanding!

As David says, he doesn't think there is a weight change but he can "feel" a difference.

This can be caused by interactive forces involved and may (quite probably) be attributed to some type of energy interactions with his muscles. I'm certain that adrenaline also plays some factor as it would be nearly impossible to contain ones excitement on seeing a phenomenon that was not previously known to them (this is what makes little kids jump up and down when they are excited). Perhaps there are T-Rays interacting with the muscles giving the sensation that the object is changing weight. This also may be the vibration he feels.

Naturally, all of this is conjecture on my part and would need to be validated scientifically.

[jonnydavro]

Hi I think this thread is the most fascinating i have read and pray that this can be replicated by the great minds here.
I have been trying to read up on Ed leedskalnin and have found some great vids on utube by scotty7129 which show a close replication of ed's pmh using the ford magnets and also a great demonstration of the retention of the magnetic current.
Also in the scotties pmh and vee magnet vid,there may be some distortion.What do you think?Jonny.

YouTube - Edward Leedskalnin's pmh 23lbs.MOV
YouTube - Ed's flywheel replication
YouTube - pmh and vee magnets

[Cloxxki]

So hands feel increased or reduced weight inide the field, but the scaled can't tell a diffference. Who'd got an idea what "it" is, then?
A local inertia reduction of sorts? Only working on moving objects?

I had a lucit moment earlier tonight, where I figured gravit was made up of various components, previously understood as one, as they'd never been isolated on earth's surface. Something is amiss in out current understanding!

[Harvey]

David,

to decide wether or not, your "sander-base" is having any effect, could you remove the rig from the sander ( without dissassembling the rig itself )....and see if the effect is still there.....no need to make a video of it...just test it and see. Then we will know if the sander is responsible in anyway for the effect/s

Great Suggestion!

He has already removed the securing screw and shown that is still works when reassembled, but he did not say whether it worked when separated.

I assume the effect is still there even when it is not turning from his earlier posts.

[rave154]

David,

to decide wether or not, your "sander-base" is having any effect, could you remove the rig from the sander ( without dissassembling the rig itself )....and see if the effect is still there.....no need to make a video of it...just test it and see. Then we will know if the sander is responsible in anyway for the effect/s

[Harvey]

What comes to mind is Bruce Cathie. Maybe someone has Bruce Cathie's software and can compare Leedskalnin's location to David's. They could also locate a suitable place for JetiJs as well.

The software may assist in dialing in to variable(s) that locate the light code to turn this device on at various locations.

Introduction to the World Grid | Bruce Cathie Maps the World Grid with Gridpoint Atlas

The research is ongoing and now, many years later, a computer program has been produced which carries out all the required calculations related to the light, gravity and earth magnetic field values. It has been found that many ancient building sites such as Stonehenge, the Great Pyramid, etc., show relationships with this unified harmonic mathematical system and indicates that the knowledge is not new. The civilizations at these times must have had scientific knowledge of a highly advanced nature.

We are now in the process of relearning this lost science. If the discovered harmonic unified equations can eventually be accepted by the scientific community as correct, then we may be on the threshold of true space travel which has no barriers. The equations show that light speed is not a constant and that time itself is a variable. Under these conditions there is no place out there in space that we cannot reach. Obviously, there is more mathematical knowledge to be discovered, but it appears that the code has been broken. Soon, with a bit of luck, we on Earth may have the chance to join our neighbors out there in the vast blackness of space.

Best regards,

IndianaBoys

I would have to agree that there is some geographical connection between many world sites. Glen Lettenmaier has done a great deal of research and documentation on this in his Tesla Wireless thread here at EF. His findings are quite thought provoking. He has discovered a mathematical relationship between these sites and the current world coordinate system.

There is a reason that the Egyptians used the Sexagesimal numbering system which has found its way into our clocks and circular mathematics even today. A RadianPrime MeridianParis Meridian
and Prime Meridian History).

The meter as we know it today is also different from that originally calculated by the french to be 1/10,000,000 of the distance from the equator to the North Pole (see Metre - Meridonal Definition ) which was off by 1/2 mm because of miscalculations regarding the flattening of the Geoid we call Earth.

It would appear that Glen has discovered a mathematical factor that relates our current coordinate system to that of the ancients where the current degrees minutes and seconds align with ancient structures in a predictable way.

According to Glen's calculations, David is within 3 miles of such a site.

Personally, I am very fascinated by all of these developments and look forward to having everything revealed - but as always, with knowledge comes responsibility and I am pondering if mankind is responsible enough to acquire and utilize this knowledge at a time where almost all new technology is applied to war and the purpose of harming other humans.

I sincerely hope that the developments are weighted such that the outcome is overbalanced toward the greater good.

[witsend]

I compressed the pieces a bit tighter in a vice and assembled them together again. This decreased the inner diameter to about 110mm. But still no effects at all. I even tried to run the device on some local energetic points, also no luck I guess I will have to wait for the laser cut rings, so far I am out of ideas.

Jet - Your work is amazing. But just a point. If you look at the position of your 'lock' if one can call it that - then the amount of mass in the 'closed' circumference is not equal to the amount of mass in the open 'legs'. If you look at the proportions in Dave's set up - you'll see that the mass in the legs and that 'closed circumference' are just about proportionate. I wonder if this proportionality is required for the effect. No idea though. Just a thought. I'm still inclined to see two entirely opposing fields or 'monopoles' in each section on either side of that lock - and I think that this may have been what Leedskalnin intended in his own design. In which case it may be required to separate each piece in the steel cut out that you're intending. Otherwise I see a kind of 'resolution' or a balancing out of the two opposing fields in the base of the leg and this may mitigate against the effect. Just a thought. In any event you'll be able to try both options, presumably.

What blows me away is that there is any 'lock' at all. Magnetic fields don't just 'dissipate' into thin air. There must be a balancing field extending all the way through the length of those pieces. And they can't just 'alter' their justification. I sort of remember being told that a magnetic field will simply 'disappear' inside a hollowed cylinder. I think this design puts paid to that 'belief'. I'm inclined to suggest that perhaps we can't measure the field inside a cylinder because it becomes too 'balanced' to detect it at all. If you think about it - by the time a field is established all the way around that rig one half diametrically opposes the other half. That's perfect symmetry. This design simply introduces an imbalance through those legs. Which also means that the pure cylinder design proposed by cody may also be a monopole and may also give a good effect. Perhaps it just needs a stronger magnetic field to expose it.

Anyway. There's way more questions here than answers - which is always a good thing. And I just wanted to suggest that perhaps you need to look to those proportions - unless I'm reading the photos incorrectly - which is a real probability given my poor eyesight. LOL.

[sturgeon]

Wow, you are really pulling out all the stops Jetijs! The only thing remaining seems to be Dave's Craftsman model#315.277140 sander base?

Cheers,

s.

[Jetijs]

I compressed the pieces a bit tighter in a vice and assembled them together again. This decreased the inner diameter to about 110mm. But still no effects at all. I even tried to run the device on some local energetic points, also no luck I guess I will have to wait for the laser cut rings, so far I am out of ideas.

[Jetijs]

I think that having the pipes open on both ends as you've stated above, that is nothing under the pipes may be important. It appears most of the replica builds so far have had something under the pipes. Just a thought as that seems to be one of the more noticeable differences between david's and the rest. Note that on Leedskalnin's generator it also had nothing above or below the outside ends.

I don't know about that. I just took the pieces off the acrylic disc and put a small plastic bucket on the rotating surface. Then I put the bent pieces around that bucket so that nothing is over or under them at least 50mm, I rotated the setup and no changes.

[david lambright]

oh you indiana boys!....you guys are good!.. I AGREE! this type of energy/technology had to have been harnessed before..for some this idea is tough to grasp but it FITS the new model...lets just say IF what i say is true...you all will be "filling in the blanks" on the new and improved physics modeling..... infinitly interesting!.....david

[ewizard]

< snip

I do think the diameter of the unit as a whole is important. Don't ask me why.

Also, please notice there is "nothing" under his bent pipes. No alum, or plastic or anything else. But it is screwed into his HDPE rotor.

Cool stuff! Where will it lead? Time will tell. Oh, if some members go to see his, he will record their visit and reaction to the unit for us, in HD.

Cheers,

Bruce

I think that having the pipes open on both ends as you've stated above, that is nothing under the pipes may be important. It appears most of the replica builds so far have had something under the pipes. Just a thought as that seems to be one of the more noticeable differences between david's and the rest. Note that on Leedskalnin's generator it also had nothing above or below the outside ends.

[david lambright]

more info...

when energized, my single junction pmh[pmh-1] shows very little magnetism but try tying a gold,copper or aluminum ring to a string, spin it and hold it near the pmh...any thing noticeable??.. Ed style pmh-2, u shape with a bar on top=2 junctions does show these effects...Tesla said experiment not equation[paraphrasing] i believe this to be true.....i am taking the day off..my uncle is coming back [OHSU] today , billy still in idaho ....i must start the step by step video.....hopefully doing that will keep my mind off of things.......and to solrey...i had no right i am truly sorry...for what i said on thunder bolts...i have had a lot on my mind...besides this.....forgive?.....david

[IndianaBoys]

Comparing Leedskalnin's location to David's with Bruce Cathie's software.

45th parallel....half way between equator and north pole?....or is it something else?.........david

What comes to mind is Bruce Cathie. Maybe someone has Bruce Cathie's software and can compare Leedskalnin's location to David's. They could also locate a suitable place for JetiJs as well.

The software may assist in dialing in to variable(s) that locate the light code to turn this device on at various locations.

Introduction to the World Grid | Bruce Cathie Maps the World Grid with Gridpoint Atlas

The research is ongoing and now, many years later, a computer program has been produced which carries out all the required calculations related to the light, gravity and earth magnetic field values. It has been found that many ancient building sites such as Stonehenge, the Great Pyramid, etc., show relationships with this unified harmonic mathematical system and indicates that the knowledge is not new. The civilizations at these times must have had scientific knowledge of a highly advanced nature.

We are now in the process of relearning this lost science. If the discovered harmonic unified equations can eventually be accepted by the scientific community as correct, then we may be on the threshold of true space travel which has no barriers. The equations show that light speed is not a constant and that time itself is a variable. Under these conditions there is no place out there in space that we cannot reach. Obviously, there is more mathematical knowledge to be discovered, but it appears that the code has been broken. Soon, with a bit of luck, we on Earth may have the chance to join our neighbors out there in the vast blackness of space.

Best regards,

IndianaBoys

[Harvey]

45th parallel....half way between equator and north pole?....or is it something else?.........david