Announcement

Collapse
No announcement yet.

Imhotep's Radiant Oscillator Video

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gotoluc
    replied
    Originally posted by Inquorate View Post
    Other ppl are figuring out the dual diodes thing too..

    RESONANCE EFFECTS FOR EVERYONE TO SHARE
    Hi Inquorate,

    that's funny you post this since this is a topic I just started at the Overunity forum.

    Thanks for bringing it here.

    Luc

    Leave a comment:


  • Bodkins
    replied
    Originally posted by Aromaz View Post
    Bodkins, THAT is a long one! 32 Watt? #24 wire? Watch out, it does not make sense but those wires can shock real hard! I had mine with 24V into coils and both HV's on one side of fL/tube - that shock was worse than a camel kick!

    See your video tomorrow!
    36 watt #26 and #23wire (may try diode too see if i can play with the movement)
    one problem im all out of 2n3055 order but waiting wednesday, thursday next week at best

    Leave a comment:


  • Inquorate
    replied
    Dual diodes

    Other ppl are figuring out the dual diodes thing too..

    RESONANCE EFFECTS FOR EVERYONE TO SHARE

    Leave a comment:


  • gotoluc
    replied
    Originally posted by Aromaz View Post
    Today is holiday in Thailand - and it was awful hot. So later afternoon I came to hide in aircon place. I posted three video's:

    #018a - YouTube - Aromaz 018a - Full day run, additional info and comparison Part 1.MP4
    Running full day with small 4.5A/Hr

    #018b - YouTube - Aromaz 018b – Full day run, additional info and comparison
    Continue af 18a - plus here I show full light in 240 Vac mains to compare strength.

    #019 - YouTube - Aromaz 019 – DRE Peek from single line and to wireless
    Some cutlets from earlier today and then a little peek into more advancement.
    Dear Corrie Lamprecht,

    I must congratulate you on proving your current draw is really in the 16 or so micro amps draw since there is now way you could have had all this light running for 20+ hours on such a small battery and have next to nothing in voltage drop. It is unfortunate that the voltage was not taken before the experiment was started but we know a 12v battery is full charge around 12.88 and your battery was around 12.80 after the 20+ hour test.

    After seeing video #018b where you separate your Dual system system setup and the amp draw returns to the milliamps range like everyone else here have, it is clear that this DUAL setup is the way to go

    I also see that you have wounded a new tube with more copper wire with 920 turns. However you have not mentioned if there is a change using it, like more or less amp draw or more or less light, compared to the first tube coil you have been using for your 20+ hour test.

    Could you please do a test on your Dual setup by removing only your Tube Coil and after check the amp draw in order to conclude if it is the tube coil making the difference (low amps) or is it the Dual setup that is making the difference.

    Thank you for your great work and sharing it.

    Luc
    Last edited by gotoluc; 12-05-2008, 07:32 PM.

    Leave a comment:


  • Aromaz
    replied
    THAT is a BIG one

    Originally posted by Bodkins View Post
    getting there Aromaz
    Bodkins, THAT is a long one! 32 Watt? #24 wire? Watch out, it does not make sense but those wires can shock real hard! I had mine with 24V into coils and both HV's on one side of fL/tube - that shock was worse than a camel kick!

    See your video tomorrow!

    Leave a comment:


  • Aromaz
    replied
    I wan'na play with sparks too

    I looked at Lidmoter's video again and, as few times today, though I also want to play with sparks like THAT! So, on the way home - 2 hours or so ago, I thought let me just go and see.......

    Well it is nearly time for the date to change here, so I am uploading this video and go to sleep.

    BUT:
    I got amazing light, reasonable sparks - NICE TOY!
    Plenty of 'ozonging ozone'
    MORE light
    No heat - little warmer than body
    and new possible direction to investigare - SOUND

    Lastly, now while uploading looked at earlier videos to review - I realized I am still playing with same battery (batteries now) that this whole thing started up this morning. Same small 'whatevers; and they have been giving me fun for 16 hours - thouh this last while probably used lots of amp draw??

    Went to check quickly: #1 is 12.16 and #2 is 12.19 volt.

    @ Ozzies, I am happy more joined! Was little long-lip because I was almost alone on this time line!

    Video # 20 is just a bit of time off - SORRY: on review it seems the first part with nice sparks went AWOL. will fix tomorrow.
    YouTube - Aromaz 020 - I wan'na play sparks too

    Good night.
    Last edited by Aromaz; 12-05-2008, 04:30 PM.

    Leave a comment:


  • Bodkins
    replied
    getting there Aromaz
    Attached Files

    Leave a comment:


  • Inquorate
    replied
    @stringguy

    Yeah, something like that. I'm going to use that clear sticky on one side plastic 'contact' stuff libraries put on book covers.. See if charge increases with more layers, so I'll leave a little petticoat of Alfoil tabs around her base, and I shall call her mary... And she can stay with me on the couch...

    Leave a comment:


  • stringguy
    replied
    @Inquorate
    build Nat's TP roll conversion tube around your 2nd ignition coil ???

    Leave a comment:


  • Inquorate
    replied
    @Aromaz

    Have you connected another ignition coil in series to first without neg of 2nd connected to anything? Or did the coil case of only one coil zap you? Maybe it is like electric fence where you hold someone else and then touch fence; only the end person gets shocked? -always funny, that trick -

    But yeah, has to be creating electrons, 6000 volts isn't enough to penetrate the oil / bakelite insulation and it's got no inductance cause it's not a coil of any sort, so it's not electromagnetically 'coupled' in any way... It does have a little capacitance maybe. Tesla said capacitors can have charge added or removed when exposed to radiant streams.

    We could measure voltage coming off case to a ground (a third ground wire? ''No, sweetiepie, I don't think I'll need a pillow, this couch looks comfortable enough, thankyou..'') and then wrap case in alternating layers of clear book laminate and Alfoil.. See what happens then...

    I'll try that.

    Ps, the wire coming off 2nd coil in my video #14, point it at a capacitor that has neon and ground wire off neg terminal, and neon will light. Even with piece of wood in the air between.

    Having watched boxa888's vids, I don't think that kind of wireless will run a load, as it's still caught up in hertzian waves, which apparently tesla says we need to get rid of, else earth is just a capacitor...

    So much to do!

    Leave a comment:


  • stringguy
    replied
    Originally posted by Inquorate View Post
    Ps I'm also an aussie. Quite an ingenious lot, very creative.

    @bobkins, don't know how you stand living in pommy land.. That's where all those awful convicts came from :-)
    ha, i'm also an ozzie, but live a few hundred k's west of bobkins, where its green and freezing, but the beer is better....
    envious of Aromaz..in that beautiful place he lives.

    how smart are the poms? sending their convicts to a tropical paradise, haha

    all of you guys are just fabulous, i'm becoming addicted to this topic, its exciting, and i feel as well that you are all on the brink of something amazing that gives hope for the future.
    bless you all.

    Leave a comment:


  • Aromaz
    replied
    Longtitudal? Worthwhile to look

    Originally posted by Inquorate View Post
    2 grounds. Nothing happens in this video, wasn't going to post it but I been thinking... after I did this video, with system on, I touched case of 2nd ignition coil and got zapped. ??? Shouldn't happen if magnetism or induction are the only energy given off. More testing to do when I get home tomorrow. No zap from 1st ignition coil casing. Yes, dumb enough to touch it even after getting shock from 2nd coil case. I'm thinking that oscillating the coils creates longitudinal compression waves in aether. These waves or oscillations of aether particles jumping in and out of their matrices give off electrons, OR when aether particles pass thru atomic latticework of metal casing, creates electrons. Thanks to braden on energeticforum.com who pm'd me re my ramblings about why transistors switching. Helped clarify in my mind what is going on.

    YouTube - Inquorate 14 - 2 grounds, not singing back

    If link don't work (I chop it up, my phone gives link for phones, not pc) search Inquorate 14
    I too got spiked today a few times from coil. Wrote it off to careless and possibly other factors. It is just very possible you might be pointing out a possibility.

    Also one serious jolt from negative terminal of battery when I disconnected it. Thereafter it is plyers only. Regardless all care I take now, that plate on video #-19 was the last shock - and strongest ever to this date since I started with these things four months ago.

    Leave a comment:


  • Aromaz
    replied
    Toroidal Spheres

    Originally posted by nat1971a View Post
    Nat - Just a thought that puzzled me for a while, result from one of those strange dreams a while back.
    It will take some time before I can catch up with you.
    Those spheres you have up outside (RE: Video) - They are empty inside?

    I am just wondering if a coil or even a toroid inside those spheres will have effect on receiving especially. Maybe you can look into this? Thinking back as Tesla's tower - that upper part looks awfully like a toroid coil? Also remember my much earlier postings where I used the toroid on probe end to pick up emissions from early systems.

    Leave a comment:


  • Inquorate
    replied
    Zapped by casing of 2nd ignition coil.

    2 grounds. Nothing happens in this video, wasn't going to post it but I been thinking... after I did this video, with system on, I touched case of 2nd ignition coil and got zapped. ??? Shouldn't happen if magnetism or induction are the only energy given off. More testing to do when I get home tomorrow. No zap from 1st ignition coil casing. Yes, dumb enough to touch it even after getting shock from 2nd coil case. I'm thinking that oscillating the coils creates longitudinal compression waves in aether. These waves or oscillations of aether particles jumping in and out of their matrices give off electrons, OR when aether particles pass thru atomic latticework of metal casing, creates electrons. Thanks to braden on energeticforum.com who pm'd me re my ramblings about why transistors switching. Helped clarify in my mind what is going on.

    YouTube - Inquorate 14 - 2 grounds, not singing back

    If link don't work (I chop it up, my phone gives link for phones, not pc) search Inquorate 14

    Leave a comment:


  • Aromaz
    replied
    New video's

    Today is holiday in Thailand - and it was awful hot. So later afternoon I came to hide in aircon place. I posted three video's:

    #018a - YouTube - Aromaz 018a - Full day run, additional info and comparison Part 1.MP4
    Running full day with small 4.5A/Hr

    #018b - YouTube - Aromaz 018b – Full day run, additional info and comparison
    Continue af 18a - plus here I show full light in 240 Vac mains to compare strength.

    #019 - YouTube - Aromaz 019 – DRE Peek from single line and to wireless

    Leave a comment:

Working...
X