An Inquiry in to the Alien Reproduction Vehicle

[aljhoa]

_Pain is erased when inflicted upon others_

Al

[robur]

Gone by request

[Gambeir]

did everyone miss the center bottom of the ARV drawing ?
what does that look like to others ?
remember the link to the TV picture tube design ?
many ideas are not correct if this detail is not correct.

No Spacecase0, I know you've brought this up many times and I'm sure you're on to something. Right now I'm just thinking about ways to test my theory of how this capacitor works, to see if it makes something, and I don't see this as especially complex.

I don't know what energies precisely need to go in the sharp end, but I think it is very logical that what comes out the other side is some other energy field and which I feel is probably an Counter-Spacial Cloud. Making and testing some small primitive capacitor shouldn't be that hard. It will just take experimenting to find what needs to go in to get the desired results.

The biggest problem has always been trying to understand what these capacitors did and I think we now have that answer.

[spacecase0]

did everyone miss the center bottom of the ARV drawing ?
what does that look like to others ?
remember the link to the TV picture tube design ?
many ideas are not correct if this detail is not correct.

[robur]

Gone by request

[robur]

Gone by request

[robur]

Gone by request

[Gambeir]

I just stumbled across this. Anyone here seen this before? https://etheric.com/flux-liner-elect...pulsion-system

A very good catch NutzNvoltz. Collaborates some of the information I posted regarding what Mark had told me in an email when I bought some prints of the ARV. Here's what I would say to keep in mind. Any descriptions which describe the operation of this vehicle by conventional methods are descriptions which have been created to cloak a true understanding of Aether Theory: Assume that before all else.

Ultimately the machine has to operate with the principles outlined by Wheeler on anti-gravity. Reason being that space is comprised of hydrogen and helium, with vast portions only being comprised of empty vacuum , and so to use a high energy field as has been described as the drive on the ARV in order to bend space time (tensor theory) is, in my opinion, a smoke screen devised to cloak a real understanding of what takes place. Warp drive in the sense we have all been lead to believe seems remote because space is essentially empty. Particles which do exist are ionized gas plasmas but almost all space is empty. It is a vacuum.

http://askascientist.co.uk/space/what-is-space-made-of/

Look at the ARV in the light of what we do know about the Aether and do not get sucked in by the official version of reality.

These so-called capacitors in the base of the ARV are shaped like pie's or tetrahedrons. Now we know from the work of Joe Parr that this shape produces some form of unknown energy, a very powerful energy which destroyed some of Parr's experimental test machines. We also know that quartz is a prism and a barrier of some type.

So you see, you have to make sense of that knowledge; why quartz? In this thread I speculated that these so-called capacitors were creating the energy to power this machine, yet even if that were possible there is still the issue of empty space and so what then does that avail thee? See, it makes no sense to have gobs of power and no where to apply it if, in fact, this story about bending space is a fantasy because it's an empty vacuum. Something Tesla himself said was a crazy idea of Albert's.

So if that's not really workable, and it isn't, then it has to be doing something else because whatever else is in this machine, it is these so-called capacitors which are obviously the fundamental engines that drive it. Now I don't know why everyone insists on thinking the central column could be a giant Tesla Tower when there are nuclear generators the size of a basketball or grabage can that could probably far outproduce the electrical energy of a Tesla Coil and so that too makes little sense in my view.

No, these so-called capacitors have to be working to produce something else and so what was it?

Before I found Ken Wheeler, and before I discovered Henry Stevens, all I knew was what everyone else knew; that being the conventional ideas about the way things work. Nobody had ever told me about the ideas which preceded Einstein. I had no knowledge of the discoveries involving the magnetic field over this last decade.

Images of this vehicle have been actively removed. The smallest color image in the upper left, when seen in large format, shows a distortion on one side of the vehicle, like the air itself is disturbed. It is slightly visible here in this image.



Whatever else the quartz based capacitors do, the one thing they positively do is to create a cloud of some kind, and if we listen to Wheeler that cloud has to be associated with the Aether.

It's clear to me after all this time that what Joe Parr was encountering was the production of a cloud of energy connected to the Aether, and in the ARV you have the exact same pyramid shaped panels.

Now how hard is this to test? We have the descriptions of how the panels are built, what's in them, and so all that's needed is to put theory to test. Forget this bending space-time nonsense is my advice and look to new discovery in your own mind as to how this machines works. We know a lot which most people in academia are not even themselves aware of. Most of these people have absolutely nothing to offer except hopelessness.

https://www.energeticforum.com/general-discussion/20998-about-ferrocell-ferrolens-18.html

[robur]

Gone by request

[robur]

Gone by request

[nutzNvoltz]

New info?

I just stumbled across this. Anyone here seen this before? https://etheric.com/flux-liner-elect...pulsion-system

[spacecase0]

Gambeir,
when you say that gravity is an incoherent magnetic field,
there are a few ways that could happen,
could you be talking about the format that this device in this PDF makes ?

https://www.mauricecotterell.com/downloads/hgwp9-27.pdf

[robur]

Gone by request

[Gambeir]

You need a MONOPOLE.

All of his magnets are 6 here and 6 or 7 here. Not enough to create a magnetic monopole field.
Nor Magnetic bubble - an area of concentrated fields with 2 opposing magnets NORTH-NORTH usually.
For this the set of magnets must be complete3 and without any breaks and 2 sets must be facing each other with identical poles.
Then you excite this area and add High-Voltage.

We are already on page 30 of this debate and keep coming back and back AND BACK TO Nearly same conclusion

You're going to have explain your thinking better and a sketch would be more useful for clarity in order to follow your thinking.

The way I now think the ARV operates could be seen as having a monopole: I've previously brought monopoles up in the thread. Now it's not really a monopole so much as it is a magnetic field without an accretion plane/bloch wall. In my last post I described a way in which I think it's possible to create as similar kind of monopole and which doesn't involve hypothetical theories as found at this link where it's described as a magnetic worm hole.

https://phys.org/news/2015-08-trio-artificial-magnetic-wormhole.html

My idea is based on the information which has been shown to occur when a moving magnetic field passes across/over/around certain metals as demonstrated in the experiments preformed by David Lowrance.
SpinningCylinder

The key here is recognizing the so-called bloch wall as an accretion disk where energy and some parts of the magnetic field are re-absorbed back in to counter-space.

The way around this is to present the magnetic field with a material that repels it, which aluminum or copper will do, and in order to accomplish this it appears that in the ARV the center ring which creates the deck where the crew compartment door is located is a solenoid which drives a magnetic field around an aluminum disk, thereby creating a repulsive field at the plane of accretion. The center column being a powerful magnet such as a liquid cooled bitter solenoid. In this arrangement the whole is create force which prevents the re-assimilation of energy along the plane of the bloch wall and thereby forces the magnetic field to flow smoothly from the base up over and around the whole of the machine.

In my present theory of operation this arrangement projects a magnetic field out the base where these so-called capacitors are located, each of which is pie shaped, and each of which is made up from a quartz that acts to diffuse the magnetic and electrical fields back to a counter-spacial cloud of energy, which is continually cycled, moving from the base up and over the vehicle to the top where it is re-assimilated back into the core magnet and re-condensed back once more and then the whole cycle is repeated. This would be happening essentially instantly as the speed of Counter-Space is essentially instantaneous for all practical purposes.

Now understanding the Alexey is of course even more complex since the whole of it's successful operation is more accidental than by design, which is something I really hate say because obviously we owe a great deal to the designer for his labor. If my understanding is correct for the ARV then it would seem that the Alexey should have it's magnets rotating around the rim of the Aluminum disk, or possible might themselves be made to individually spin in holes in the aluminum plate which is what appears to be the case in these images.




In this arrangement it would seem that the AC is propelled in the correct polarity via a DC field that is held and cycled via the magnets fields, and since the nature of the aluminum is to repel a moving magnetic field then the AC field in the plate is held away from the magnets accretion plane, althewhile the DC field is being carried it through the aluminum plate via the magnetic field, whereupon the AC field will be taken up in whatever polar direction the DC field is moving, which is of course going to be flowing to the positive pole upwards, and so you have a sort of magnetic monopole.

Now obviously if I've gotten this figured right then there's a long term problem because all the AC isn't be used. Only the AC positive is being used and so there's a build up of a negative polar field in the aluminum plate. This might explain why the Alexey Device runs out of juice after a while because eventually there's just no more room for any positive movement in the plate and therefore the propulsive force of the positive field ceases to exist.

[robur]

Gone by request